| Title |
Investigation of SRF Elliptical Cavities Made by New Nb Materials in KEK |
| Authors |
- T. Dohmae, K. Umemori, Y. Watanabe, M. Yamanaka
KEK, Ibaraki, Japan
- T. Okada
Sokendai, Ibaraki, Japan
|
| Abstract |
Cost reduction for cavity fabrication is currently main issue to realize international linear collider. Cavity fabrication facility (CFF) in KEK is approaching this issue from a point of view of materials for cavities. CFF had fabricated SRF elliptical cavities made by two types of niobium; one is high tantalum contained and low RRR (< 100) fine grain niobium, and the other is high tantalum contained and RRR < 300 large grain (LG) niobium. Former was melted two times (normally five times) which results RRR recovery up to around 300, and used for cell parts. Two 3-cell cavities were fabricated for each material respectively and vertical tested. One of these cavity made by LG achieved accelerator gradients of more than 40 MV/m. In this report, cavity materials and vertical test results are presented in detail.
|
| Paper |
download THPO002.PDF [0.568 MB / 3 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
LINAC2018 |
| Series |
Linear Accelerator Conference (29th) |
| Location |
Beijing, China |
| Date |
16-21 September 2018 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Guoxi Pei (IHEP, Beijing, China); Volker RW Schaa (GSI, Darmstadt, Germany); Yong Ho Chin (KEK, Tsukuba, Japan); Shinian Fu (IHEP, Beijing, China); Ning Zhao (IHEP, Beijing, China) |
| Online ISBN |
978-3-95450-194-6 |
| Online ISSN |
2226-0366 |
| Received |
12 September 2018 |
| Accepted |
20 September 2018 |
| Issue Date |
18 January 2019 |
| DOI |
doi:10.18429/JACoW-LINAC2018-THPO002 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
