Journals of Accelerator Conferences Website (JACoW)
JACoW
is a publisher in Geneva, Switzerland that publishes the
proceedings of accelerator conferences held around the world
by an international collaboration of editors.
| URL | https://doi.org/10.18429/JACoW-IPAC2025-THPB079 |
|---|---|
| Title | Investigation of properties of CuZr alloy for vacuum chamber structural materials |
| Authors |
|
| Abstract | CuZr alloy is considered for the structural material of the vacuum chamber of the Hefei Advanced Light Facility (HALF) storage ring. We tested the outgassing rate of CuZr material. The outgassing rate of CuZr alloy can reach 4.93×10^-11 Pa·L/s·cm² after baking at 180°C for 48h, which is more than one order of magnitude lower than that of SS. These results indicate that CuZr alloy is easier to degas by baking at lower temperatures and is a material with very low outgassing rates. At the same time, it is a highly competitive structural material for future accelerator vacuum chamber based on its good electrical conductivity, high strength and hardness. |
| Paper | download: THPB079.pdf |
| Cite | BibTeX, LaTeX, Text/Word, RIS, EndNote |
| Conference | 16th International Particle Accelerator Conference |
| Series | |
| Location | Taipei, Taiwan |
| Date | 01-06 Jun 2025 |
| Publisher | JACoW Publishing, Geneva, Switzerland |
| Editorial Board | * Ming-Chyuan Lin - National Synchrotron Radiation Research Center * Yoichi Sato - KEK * Jui-Che Huang - National Synchrotron Radiation Research Center * David Button - Australian Nuclear Science and Technology Organisation * Ping-Shun Chuang - National Synchrotron Radiation Research Center |
| Online ISBN | 978-3-95450-248-6 |
| Online ISSN | 2673-5490 |
| Received | 17 May 2025 |
| Revised | 14 October 2025 |
| Accepted | 14 October 2025 |
| Issued | 05 November 2025 |
| DOI | 10.18429/JACoW-IPAC2025-THPB079 |
| Pages | 2644-2646 |
| Copyright | Published by JACoW Publishing under the terms of the Creative Commons Attribution 4.0 license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |