In the framework of EuPRAXIA@SPARC_LAB project, we are studying possible solutions to upgrade and measure the amplitude and phase stability of the RF accelerating fields generated by a klystron. These studies concern the C- and X- band klystrons installed in the LNF infrastructures. In particular, we will present our work on a fast phase feedback around the C-band power station (50 MW klystron and solid state modulator) installed at SPARC_LAB. We are trying to push the timing jitter below the standard limit of such systems (few tens of fs RMS). A second topic is the study of the jitter of the X-band power station (50 MW klystron and solid state modulator) installed in the TEX facility. Precise measurements on amplitude and phase of this system will be reported at different positions both upstream (LLRF and pre-amp) and downstream (waveguides and prototype structure) the klystron.

SPARC_LAB facility was born in 2004 as an R&D activity to develop a high brightness electron photo-injector dedicated to FEL experiments and exploration of advanced acceleration techniques. The electron source consists in a brazefree 1.6-cell S-band RF gun with a peak electric field of 120 MV/m and a metallic copper photocathode. The gun injects particles into two S-band sections, the initial section acting as an RF compressor using the velocity bunching technique, with built-in solenoid coils that enhance magnetic focusing and control emittance. A subsequent C-band acceleration section acts as a booster to achieve the desired kinetic energy. The Lazio Regional government recently funded the SABINA project for the consolidation of SPARC_LAB facility. The reference and the distribution systems and the Low Level radiofrequency (LLRF) system will also undergo a significant upgrade, involving the replacement of the original analogue S-band and digital C-band radiofrequency systems with commercial, temperature-stabilized, FPGA-controlled LLRF digital systems provided by Instrumentation Technologies in order to improve performance in terms of amplitude, phase resolution, and stability.