| Title |
Magnet Design for the PETRA IV Storage Ring |
| Authors |
- R. Bartolini, I.V. Agapov, A. Aloev, H.-J. Eckoldt, D. Einfeld, B. Krause, A. Petrov, M. Thede, M. Tischer
DESY, Hamburg, Germany
- J. Chavanne
ESRF, Grenoble, France
|
| Abstract |
The proposed PETRA IV electron storage ring that will replace DESY’s flagship synchrotron light source PETRA III will feature a horizontal emittance as low as 20 pmrad. It is based on a hybrid six-bend achromat lattice. In addition to the storage ring PETRA IV, the Booster Synchrotron and the corresponding transfer line will be renewed. Overall about 4000 magnets will be manufactured. The lattice design require high-gradient quadrupoles, which are unfeasible with conventional steel, used traditionally for normal-conducting magnets. The required gradient is safely reached with the poles, made of Permendur. The bending magnets for the storage ring will be based on permanent magnets. This contribution presents the electromagnetic design of the magnets for the storage ring and booster synchrotron.
|
| Paper |
download THPOTK002.PDF [0.674 MB / 3 pages] |
| Cite |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2022 |
| Series |
International Particle Accelerator Conference (13th) |
| Location |
Bangkok, Thailand |
| Date |
12-17 June 2022 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Frank Zimmermann (CERN, Meyrin, Switzerland); Hitoshi Tanaka (RIKEN, Hyogo, Japan); Porntip Sudmuang (SRLI, Nakhon, Thailand); Prapong Klysubun (SRLI, Nakhon, Thailand); Prapaiwan Sunwong (SRLI, Nakhon, Thailand); Thakonwat Chanwattana (SRLI, Nakhon, Thailand); Christine Petit-Jean-Genaz (CERN, Meyrin, Switzerland); Volker R.W. Schaa (GSI, Darmstadt, Germany) |
| Online ISBN |
978-3-95450-227-1 |
| Online ISSN |
2673-5490 |
| Received |
09 June 2022 |
| Revised |
14 June 2022 |
| Accepted |
15 June 2022 |
| Issue Date |
05 July 2022 |
| DOI |
doi:10.18429/JACoW-IPAC2022-THPOTK002 |
| Pages |
2767-2769 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
