IPAC2019 - Table of Session: TUXXPLS (Contributed Orals: Novel Particle Sources and Acceleration Techniques)

Paper	Title	Page
TUXXPLS1	SRF Gun with Warm Photocathode
	I. Pinayev, I. Ben-Zvi, J.C. Brutus, T. Hayes, Y.C. Jing, V. Litvinenko, J. Ma, K. Mihara, G. Narayan, F. Severino, K. Shih, J. Skaritka, E. Wang, G. Wang BNL, Upton, Long Island, New York, USA I. Petrushina SUNY SB, Stony Brook, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The 113 MHz superconducting gun is used an electron source for the coherent electron cooling experiment. The unique feature of the gun is that a photocathode is held at room temperature. It allowed to preserve the quantum efficiency of Cs2KSb cathode which is adversely affected by cryogenic temperatures. Relatively low frequency permitted fully realize the accelerating field gradient what in in turn helps to achieve 10 nC charge and 0.3 microns normalized emittance. We present the achieved performance an operational experience as well.
	Slides TUXXPLS1 [6.786 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUXXPLS2	Negative Muonium Ion Production With a C12A7 Electride Film	1175
	M. Otani, Y. Fukao, K. Futatsukawa, N. Kawamura, T. Mibe, Y. Miyake, K. Shimomura, T. Yamazaki KEK, Tsukuba, Japan K. Hasegawa, Y. Kondo, T. Morishita JAEA/J-PARC, Tokai-mura, Japan T. Iijima, Y. Sue Nagoya University, Graduate School of Science, Chikusa-ku, Nagoya, Japan H. Iinuma, Y. Nakazawa Ibaraki University, Ibaraki, Japan K. Inami, M. Yotsuzuka Nagoya University, Nagoya, Japan K. Ishida RIKEN Nishina Center, Wako, Japan R. Kitamura, H.Y. Yasuda University of Tokyo, Tokyo, Japan N. Saito J-PARC, KEK & JAEA, Ibaraki-ken, Japan
	Funding: This work was supported by OSPS KAKENHI Grant Numbers JP15H03666, JP 16H03987, JP18H03707. Negative muonium ion production is one of methods to cool muons. Since its discovery in 1987 by interactions of muons with a metal foil, it has been discussed that the production efficiency would be improved using a low-work function material. C12A7 (12CaO·7AlO3) was a well-known insulator as a constituent of alumina cement, but was recently confirmed to exhibit electric conductivity by electron doping. The C12A7 electride has lower work function (2.9 eV) and it was reported that nearly the same negative current signal as that with a bi-alkali material coated metal were observed in H⁻ formation. In this poster, the negative muonium production measurement with a Al foil and C12A7 electride film will be presented.
	Slides TUXXPLS2 [2.680 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUXXPLS2
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUXXPLS3	The Design Optimization of the Dielectric Assist Accelerating Structure for Better Heat and Gas Transfer	1179
	S. Mori, M. Yoshida KEK, Ibaraki, Japan D. Sato AIST, Tsukuba, Ibaraki, Japan
	The dielectric-assist accelerating (DAA) structure is a dielectric-inserted normal-conducting cavity, which provides high Q value at room temperature. This accelerating structure is composed of dielectric disks and a dielectric cylindrical layer inserted in a copper cavity. For the realistic operation, the removal of heat from the dielectric cells and the vacuum evacuation of gas inside the cylindrical layers have not considered yet. In order to solve the problems, we propose the optimized design of the DAA structure, where the extended part of the dielectric disk is embedded in the copper cavity and the choke structure is applied. We show the result of the electromagnetic-field simulation of the extended DAA structure and the thermal simulation to clarify the relation between a duty factor and maximum temperature of the dielectric cells.
	Slides TUXXPLS3 [5.892 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUXXPLS3
About •	paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUXXPLS1

SRF Gun with Warm Photocathode

I. Pinayev, I. Ben-Zvi, J.C. Brutus, T. Hayes, Y.C. Jing, V. Litvinenko, J. Ma, K. Mihara, G. Narayan, F. Severino, K. Shih, J. Skaritka, E. Wang, G. Wang
BNL, Upton, Long Island, New York, USA
I. Petrushina
SUNY SB, Stony Brook, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The 113 MHz superconducting gun is used an electron source for the coherent electron cooling experiment. The unique feature of the gun is that a photocathode is held at room temperature. It allowed to preserve the quantum efficiency of Cs2KSb cathode which is adversely affected by cryogenic temperatures. Relatively low frequency permitted fully realize the accelerating field gradient what in in turn helps to achieve 10 nC charge and 0.3 microns normalized emittance. We present the achieved performance an operational experience as well.

Slides TUXXPLS1 [6.786 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUXXPLS2

Negative Muonium Ion Production With a C12A7 Electride Film

1175

M. Otani, Y. Fukao, K. Futatsukawa, N. Kawamura, T. Mibe, Y. Miyake, K. Shimomura, T. Yamazaki
KEK, Tsukuba, Japan
K. Hasegawa, Y. Kondo, T. Morishita
JAEA/J-PARC, Tokai-mura, Japan
T. Iijima, Y. Sue
Nagoya University, Graduate School of Science, Chikusa-ku, Nagoya, Japan
H. Iinuma, Y. Nakazawa
Ibaraki University, Ibaraki, Japan
K. Inami, M. Yotsuzuka
Nagoya University, Nagoya, Japan
K. Ishida
RIKEN Nishina Center, Wako, Japan
R. Kitamura, H.Y. Yasuda
University of Tokyo, Tokyo, Japan
N. Saito
J-PARC, KEK & JAEA, Ibaraki-ken, Japan

Funding: This work was supported by OSPS KAKENHI Grant Numbers JP15H03666, JP 16H03987, JP18H03707.
Negative muonium ion production is one of methods to cool muons. Since its discovery in 1987 by interactions of muons with a metal foil, it has been discussed that the production efficiency would be improved using a low-work function material. C12A7 (12CaO·7AlO3) was a well-known insulator as a constituent of alumina cement, but was recently confirmed to exhibit electric conductivity by electron doping. The C12A7 electride has lower work function (2.9 eV) and it was reported that nearly the same negative current signal as that with a bi-alkali material coated metal were observed in H⁻ formation. In this poster, the negative muonium production measurement with a Al foil and C12A7 electride film will be presented.

Slides TUXXPLS2 [2.680 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUXXPLS2

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUXXPLS3

The Design Optimization of the Dielectric Assist Accelerating Structure for Better Heat and Gas Transfer

1179

S. Mori, M. Yoshida
KEK, Ibaraki, Japan
D. Sato
AIST, Tsukuba, Ibaraki, Japan

The dielectric-assist accelerating (DAA) structure is a dielectric-inserted normal-conducting cavity, which provides high Q value at room temperature. This accelerating structure is composed of dielectric disks and a dielectric cylindrical layer inserted in a copper cavity. For the realistic operation, the removal of heat from the dielectric cells and the vacuum evacuation of gas inside the cylindrical layers have not considered yet. In order to solve the problems, we propose the optimized design of the DAA structure, where the extended part of the dielectric disk is embedded in the copper cavity and the choke structure is applied. We show the result of the electromagnetic-field simulation of the extended DAA structure and the thermal simulation to clarify the relation between a duty factor and maximum temperature of the dielectric cells.

Slides TUXXPLS3 [5.892 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUXXPLS3

About •

paper received ※ 30 April 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)