TY - CONF AU - Phimsen, T. AU - Jiang, B.C. AU - Juntong, N. AU - Sudmuang, P. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Siam Photon Source (SPS), located at Nakhon Ratchasima, Thailand, is a synchrotron light source with the beam energy of 1.2 GeV. User operation is performed in beam decay mode with the maximum current of 150 mA. Beam lifetime is about 12 hours at the beam current of 100 mA. Beam injection is carried out twice a day, and even with full energy, it takes roughly 30 minutes. Beam lifetime in the SPS storage ring is limited by Touschek scattering and strongly depends on operation conditions. Higher harmonic RF cavity is a proven method to increase the beam lifetime and suppressing coupled bunch instabilities through Landau damping effect. If the beam lifetime is increased for examples, to be double, only one injection per day would be needed. In this study, an improvement of Touschek lifetime by passive harmonic RF cavity is investigated. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1669 EP - 1672 KW - cavity KW - storage-ring KW - operation KW - synchrotron KW - scattering DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW110 UR - http://jacow.org/ipac2019/papers/tupgw110.pdf ER - TY - CONF AU - Wang, Z. AU - Gu, Q. AU - Wang, G.L. AU - Zhao, M.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Injector Physics Design at SHINE J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - As a CW x-ray free electron laser facility, SHINE has a high requirement on the electron beam quality in the linac, as well as in the injector. SHINE injector consists of a 162.5 MHz normal conducting VHF gun, a NC 1.3 GHz RF buncher, a one cavity SC cryomodule, an eight cavity SC cryomodule and 3 solenoids along the injector layout. Some beam diagnostic element are inserted in the layout as well. In this paper, we try to introduce the injector physics design at shine. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1801 EP - 1803 KW - laser KW - electron KW - feedback KW - FEL KW - emittance DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB053 UR - http://jacow.org/ipac2019/papers/tuprb053.pdf ER - TY - CONF AU - Yu, C. AU - Deng, H.X. AU - He, Y.Z. AU - Hu, X. AU - Jiang, Z. AU - Liu, B. AU - Qian, M.F. AU - Wang, D. AU - Wang, H.F. AU - Wen, Y.M. AU - Xiang, S. AU - Yin, L. AU - Zhang, J.D. AU - Zhang, W. AU - Zhao, Z.T. AU - Zhou, Q.G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - First Results of the IVU16 Prototype Undulator Measurements J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Shanghai Synchrotron Radiation Facility (SSRF) has developed a 16 mm period length, 4 mm gap, in-vacuum undulator (IVU) that is planned to be installed and tested in the 1.5 GeV SXFEL-SBP beam line. This paper will describe the main parameters of the undulator and the key design choices that have been made. The first undulator prototype was assembled and magnetically tested. First measurements with vacuum chamber will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1808 EP - 1810 KW - FEL KW - vacuum KW - undulator KW - MMI KW - SRF DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB055 UR - http://jacow.org/ipac2019/papers/tuprb055.pdf ER - TY - CONF AU - Wang, L. AU - Fang, W. AU - Hirshfield, J.L. AU - Jiang, Y. AU - Shchelkunov, S.V. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - 1st+2nd Harmonic Photocathode Bimodal Gun R&D J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A novel Bimodal Electron Gun is designed to apply microwaves at two harmonically-related frequency in a 0.6 cell RF gun to increase the RF breakdown threshold and enhance the beam quality. This stratagem is intended to allow the RF gun structure to support a high accelera-tion gradient as well as to manipulate the emittance evolution in the half cell. By selecting a proper ampli-tude ratio and phase relationship between the first and second harmonic RF field components in the gun cavity, the superposition of the harmonic field components can provide a flat-top like RF profile to omitting the RF emittance component in the gun, while increase the RF breakdown threshold. The recent status of the Bimodal Electron Gun R&D is presented, including the designs of the novel two frequency RF structure and the simulation of the beam dynamic. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2054 EP - 2057 KW - gun KW - emittance KW - cathode KW - electron KW - cavity DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPTS054 UR - http://jacow.org/ipac2019/papers/tupts054.pdf ER - TY - CONF AU - Fang, W. AU - Wang, L. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design Study of 3.6-cell C-band Photocathode Electron Gun J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A C-band photocathode injector composed of a 3.6-cell C-band photocathode RF gun and two 1.8-meter C-band accelerating structures is proposed. The injector is a low emittance electron source for Free Electron Lasers (FEL) and other compact light sources. The RF structure of the cavities is designed with 2D SUPERFISH simulation. The Beam dynamic study in ASTRA helps rectify the 2D RF simulation. To feed the cavities, a design of extra coaxial coupler with RF gun structure is presented. With compact focusing solenoids, for 0.25nC bunch charge, the final energy can reach 6.9 MeV energy and the 95% emittance can be as low as 0.23 mm mrad (95%). All the details of RF design and beam dynamics studies are presented in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2121 EP - 2123 KW - gun KW - emittance KW - simulation KW - FEL KW - cathode DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPTS085 UR - http://jacow.org/ipac2019/papers/tupts085.pdf ER - TY - CONF AU - Jiang, R. AU - Leng, Y.B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Application of Clustering by Fast Search and Find of Density Peaks to Beam Diagnostics at SSRF J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - With the increased technological complexity of accelera-tors, meeting the demand of beam diagnostics and opera-tion need more powerful and faster methods. And detect-ing the accuracy and stability of beam position moni-tors(BPMs) are important for all kinds of measurement systems and feedback systems in particle accelerator field. As an effective tool for data analysis and automa-tion, the machine learning methods had been used in accelerator physics field, recently. Among machine learn-ing methods, the clustering by fast search and find of density peaks as a typical unsupervised learning algo-rithms could be performed directly without training in arbitrary accelerator systems and could discover un-known patterns in the data. This paper used clustering by fast search and find of density peaks to detect faulty beam position monitor or monitoring beam orbit stability by analysis five typical parameters, that is beta oscilla-tion of X and Y direction(BetaX and BetaY), transverse oscillation of X and Y direction(AmpX and AmpY) and energy oscillation(AmpE). The results showed that cluster-ing by fast search and find of density peaks could classi-fy beam data into different clusters on the basis of their similarity. And that, aberrant run data points could be detected by decision graph. Morever, analysis results demonstrate the characteristic parameters AmpE, AmpX and BetaX amplitude have the same effect to distinguish the faulty BPMs and the AmpY and the BetaY amplitude are also. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2581 EP - 2583 KW - SRF KW - GUI KW - storage-ring KW - diagnostics KW - electron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW045 UR - http://jacow.org/ipac2019/papers/wepgw045.pdf ER - TY - CONF AU - Gao, B. AU - Leng, Y.B. AU - Xu, X.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Deep Learning Applied for Multi-Slit Imaging Based Beam Size Monitor J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In order to satisfy the requirement of high speed measurement and improve the accuracy of BSM (beam size monitor), multi-slit imaging based BSM has been proposed by SSRF at 2017. However, it is very difficult to deconvolve the image and figure out the beam size, which requires dedicated algorithms to solve this issue. Deep learning is one of the most popular algorithms, which can learn to mimic any distribution of data. In the region of Beam instrumentation, they can be taught to deal with many difficult problem. In this paper, multi-layer neural network is used to process the images from the multi-slit imaging system. Training processes, struct of the neural networks and the result of the experiments will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2587 EP - 2590 KW - network KW - simulation KW - SRF KW - synchrotron KW - synchrotron-radiation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW049 UR - http://jacow.org/ipac2019/papers/wepgw049.pdf ER - TY - CONF AU - Wu, T. AU - Cao, S.S. AU - Chen, J. AU - Gao, B. AU - Lai, L.W. AU - Leng, Y.B. AU - Zhou, Y.M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of Stripline BPM for the SHINE Project J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - As a under-constrution forth-generation light source in China, SHINE(Shanghai HIgh repetition rate XFEL aNd Extreme light facility) is expected to play an important role in basic scientific research in the field of materials and medicine. However, the performance of FEL depends critically on the completeness and quality of their beam diagnostic systems. Since the SHINE project will operate with bunch charge at 100pC, which is only one-quarter of that in the SXFEL, the measurement accuracy requirements for SBPM will increase significantly. On the other hand, the bunch repetition frequency of SHINE reached 1MHz, which shortened the threshold for measuring dead time. Fitting the requirement, the passband and the sampling rate design of stripline BPM is upgraded for the SHINE project. The final design was simulated using the data on the SXFEL, and the some inspiring results have been made. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2605 EP - 2607 KW - FEL KW - simulation KW - experiment KW - diagnostics KW - beam-diagnostic DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW057 UR - http://jacow.org/ipac2019/papers/wepgw057.pdf ER - TY - CONF AU - Zhou, Y.M. AU - Gao, B. AU - Leng, Y.B. AU - Zhang, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Bunch Length Measurement Using Multi-Frequency Harmonic Analysis Method at SSRF J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Harmonics method in the frequency domain is an effective and inexpensive bunch length measurement method, which was implemented at the Shanghai Synchrotron Radiation Facility (SSRF). A multi-frequency bunch-bybunch length measurement system using an integrated RF conditioning module will be established to reduce the system noise and signal reflection, and to improve the bunch length measurement accuracy as well. The module consists of power splitters, band-pass filters, mixers and so on. The main function of the integrated RF conditioning module is to extract the beam signals at 500MHz, 1.5GHz, 2GHz, and 3GHz operating frequency. Raw data are acquired by a high-precision digitizer and analyzed by MATLAB code. The absolute bunch length can be obtained with a streak camera, which was used to calibrate the response coefficients of the system. Bunch-by-bunch length can be measured by the multi-frequency harmonic analysis method from the button BPM PB - JACoW Publishing CP - Geneva, Switzerland SP - 2616 EP - 2618 KW - SRF KW - experiment KW - storage-ring KW - operation KW - framework DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW061 UR - http://jacow.org/ipac2019/papers/wepgw061.pdf ER - TY - CONF AU - Xu, X.Y. AU - Leng, Y.B. AU - Zhou, Y.M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Machine Learning Application in Bunch Longitudinal Phase Measurement J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - High resolution bunch-by-bunch longitudinal phase measurement has been realized at Shanghai Synchrotron Radiation Facility (SSRF). In order to fully exploit the potency of the bunch phase monitor, the transient state during injection is being further studied. A longitudinal phase fitting method was used to study the synchrotron damping oscillation in injection events, where we can get the energy offsets between the injector and the storage ring, refilled bunch arrived time and the synchrotron damping time. However, manual multi-parameter fitting of nonlinear functions is awfully complex and slow. Machine learning algorithms, such as gradient descent and artificial neural network (ANN) is more suitable to do this fitting. Through these methods, we can quickly obtain more accurate fitting parameters and further realize online measurement of the refilled charge arrived time, energy offsets between the injector and storage ring, and the synchrotron damping time. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2625 EP - 2628 KW - network KW - synchrotron KW - damping KW - SRF KW - injection DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW064 UR - http://jacow.org/ipac2019/papers/wepgw064.pdf ER - TY - CONF AU - Huang, X.X. AU - Fang, W. AU - Grudiev, A. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Study on the Design of the X-band Waveguide-damped Structure J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The design of waveguide-damped structure is optimized to reduce the magnitudes of surface electromagnetic fields and strongly suppress long-range transverse wakefields of the 380 GeV Compact Linear Collider facility currently under study. The optimization is mainly discussed with the elliptical shape of the iris, the wall shape of the damping waveguides, the position of the high-order-mode damping loads and the widths of the waveguide openings of the entire sequence of damping waveguides. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2886 EP - 2889 KW - wakefield KW - damping KW - GUI KW - HOM KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB034 UR - http://jacow.org/ipac2019/papers/weprb034.pdf ER - TY - CONF AU - Li, Z.B. AU - Fang, W. AU - Gu, Q. AU - Huang, X.X. AU - Tan, J.H. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - High Power Test of the First C-band Spherical Pulse Compressor Prototype J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Recently, a new C-band (5712 MHz) compact spherical radio frequency (RF) pulse compressor was designed and tested for Shanghai Soft X-ray Free Electron Laser Facili-ty (SXFEL). This pulse compressor utilizes one high Q₀ spherical RF resonant cavity that works with two TE1, 1,3 modes and a dual-mode polarized coupler. The peak power multiply factor is 6.1 and average power gain 3.8 in theory. During the high power test, a peak power mul-tiply factor of 5.74 and average power gain of 3.77 was achieved. This paper presents the RF measurement of the C-band spherical pulse compressor and the high power test results. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2896 EP - 2898 KW - GUI KW - cavity KW - FEL KW - electron KW - linac DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB042 UR - http://jacow.org/ipac2019/papers/weprb042.pdf ER - TY - CONF AU - Tan, J.H. AU - Fang, W. AU - Gu, Q. AU - Huang, X.X. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design, Fabricate, and Tuning of X-Band Deflecting Structure for CERN J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A 20-cell x-band deflecting structure for CERN has been finished, and now is under high power conditioning at XBOX of CERN. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2915 EP - 2917 KW - simulation KW - cavity KW - GUI KW - free-electron-laser KW - electron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB048 UR - http://jacow.org/ipac2019/papers/weprb048.pdf ER - TY - CONF AU - Liu, K. AU - Gu, Q. AU - Li, L. AU - Wang, Ch. AU - Zhao, M.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - MODELING AND SIMULATION FOR MULTI-FEEDING CAVITY WITHOUT BEAM LOADING J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Multi-feeding cavity usually be applied in super-conducting and normal-conducting RF cavity. The differences between multiple input couplers in coupler coefficient, incident power and phase will cause the cavity field stabilities can not meet the requirements. For explore the influences of these differences and develop equations for measurement, a multi-feeding LCR transient model was developed. As two-feeding cavity, the VHF photocathode electron gun was model and simulated in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3921 EP - 3923 KW - cavity KW - electron KW - impedance KW - simulation KW - beam-loading DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB049 UR - http://jacow.org/ipac2019/papers/thprb049.pdf ER -