TY - CONF AU - Chanwattana, T. AU - Klysubun, P. AU - Pulampong, T. AU - Sudmuang, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design and Optimization of Full Energy Injector Linac for Siam Photon Source II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The new Thailand synchrotron light source, Siam Photon Source II (SPS-II), has been designed based on a 3 GeV storage ring with a Double-Triple Bend Achromat (DTBA) lattice and a full energy injector linac. The linac consists of an S-band photocathode RF gun, C-band accelerating structures and two magnetic chicanes. In addition to its main function as the storage ring injector, the linac is capable of producing sub-picosecond electron bunches for additional short-pulse beamlines at the end of the linac. The linac also has a potential to become a driver of a soft X-ray Free Electron Laser (FEL) operating adjacent to the storage ring. In this paper, start-to-end simulations of the full energy linac are presented. Optimization was performed in order to fulfil requirements for both storage ring injection and short pulse generation. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1570 EP - 1572 KW - linac KW - storage-ring KW - injection KW - emittance KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW072 UR - http://jacow.org/ipac2019/papers/tupgw072.pdf ER - TY - CONF AU - Phimsen, T. AU - Chaichuay, S. AU - Deepan, R. AU - Juntong, N. AU - Khamkham, A. AU - Klysubun, P. AU - Prawanta, S. AU - Sudmuang, P. AU - Sunwong, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Conceptual Design of Vacuum Chamber for SPS-II Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The SPS-II is a 3 GeV ultralow emittance light source which is now under studied and designed by Thailand Synchrotron Light Research Institute (SLRI). The SPS-II storage ring is based on Double-Triple Bend Achromat (DTBA) cell with a circumference of 321.3 m aiming for horizontal emittance of less than 1 nm-rad. The compact lattice leaves narrow space for vacuum components. The small gap between poles of the magnets requires narrow vacuum chambers and limits the conductance of the chambers. The chambers will be made by stainless steel with a thickness of 1.5 mm. the cross section of beam duct is 40 mm × 16 mm elliptical shape. The bending chamber is designed as a long triangular chamber such that photon absorber can be installed as far from the light source as possible to lower the power density of the heat load. The overview of designed vacuum system for the SPS-II is presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1666 EP - 1668 KW - vacuum KW - storage-ring KW - photon KW - impedance KW - emittance DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW109 UR - http://jacow.org/ipac2019/papers/tupgw109.pdf ER - TY - CONF AU - Phimsen, T. AU - Jiang, B.C. AU - Juntong, N. AU - Sudmuang, P. AU - Zhao, Z.T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Siam Photon Source (SPS), located at Nakhon Ratchasima, Thailand, is a synchrotron light source with the beam energy of 1.2 GeV. User operation is performed in beam decay mode with the maximum current of 150 mA. Beam lifetime is about 12 hours at the beam current of 100 mA. Beam injection is carried out twice a day, and even with full energy, it takes roughly 30 minutes. Beam lifetime in the SPS storage ring is limited by Touschek scattering and strongly depends on operation conditions. Higher harmonic RF cavity is a proven method to increase the beam lifetime and suppressing coupled bunch instabilities through Landau damping effect. If the beam lifetime is increased for examples, to be double, only one injection per day would be needed. In this study, an improvement of Touschek lifetime by passive harmonic RF cavity is investigated. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1669 EP - 1672 KW - cavity KW - storage-ring KW - operation KW - synchrotron KW - scattering DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW110 UR - http://jacow.org/ipac2019/papers/tupgw110.pdf ER - TY - CONF AU - Juntong, N. AU - Chulakham, N. AU - Malichan, S. AU - Phimsen, T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Utilizing the High Shunt Impedance TM020-Mode Cavity in the Double RF Systems for the Storage Ring of the Thailand New Light Source J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The utilization of the TM020-mode cavity for the storage ring based light source was pioneered by SPring-8 with its high quality factor and hence its high shunt impedance. KEK-LS has also studied the possibility of using this type of cavity for their storage ring. The TM020-mode cavity has larger transverse dimension compared to the traditional TM010-mode cavity, but with its higher shunt impedance it can be designed to fit in the new low emittance storage ring regardless. The new storage ring based light source project in Thailand aims to optimum the low emittance beam in nano-meters region with the energy of 3 GeV. The TM020-mode cavity was considered as the main cavity and the harmonic cavity for the storage ring. They have been designed to have their pipe aperture fits the storage ring beam ducts. The main cavity has a high shunt impedance of 8.3 Mega Ohms with the 51,000 unloaded quality factor. The harmonic cavity has a high shunt impedance and an unloaded quality factor of 2.45 Mega Ohms and 36,000, respectively. The damping mechanism of the parasitic modes and the tuning mechanism of the operating mode of these cavities were also studied. There will be four main cavities and six harmonic cavities in the new storage ring. Detailed design and study of these cavities will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2972 EP - 2975 KW - cavity KW - storage-ring KW - impedance KW - coupling KW - damping DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB066 UR - http://jacow.org/ipac2019/papers/weprb066.pdf ER - TY - CONF AU - Prawanta, S. AU - Boonwanna, B. AU - Klysubun, P. AU - Kwankasem, A. AU - Pongampai, S. AU - Sooksrimuang, V. AU - Sudmuang, P. AU - Sunwong, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design and Construction of Sextupole Magnet Prototype for Siam Photon Source II Project J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Siam Photon Source II (SPS-II) project in Thailand is the third-generation synchrotron light source. The lattice of the 3 GeV electron storage ring has been designed, consisting of 14 Double Triple Bend Achromat (DTBA) cells with the total circumference of 321.3 m. The storage ring lattice includes 56 bending magnets, 28 combined dipole and quadrupole magnets, 224 quadrupole magnets and 84 multifunction sextupole magnets. This paper presents the design and construction of a sextupole magnet prototype for SPS-II project. Magnet prototype was designed with the magnetic field gradient of 2,030 T/m2 and includes functions of skew-quadrupole, horizontal and vertical correctors. The magnetic core is made of S10C low-carbon steel. A prototype of sextupole magnet has been constructed. All dimensional tolerances are within the range of ±20 µm. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4295 EP - 4297 KW - sextupole KW - quadrupole KW - software KW - simulation KW - multipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS076 UR - http://jacow.org/ipac2019/papers/thpts076.pdf ER - TY - CONF AU - Sunwong, P. AU - Klysubun, P. AU - Phimsen, T. AU - Prawanta, S. AU - Sudmuang, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Magnet Design for Siam Photon Source II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Siam Photon Source II project has been approved and detailed technical design of the accelerator system is currently in progress. The Double Triple Bend Achromat (DTBA) lattice is implemented in the storage ring design for low emittance and more space for insertion devices. Magnets with moderate to high field requirements have been designed, including combined function magnet with the field gradient of 27.1 T/m, quadrupole magnets with the field gradient up to 60 T/m and multifunction sextupole magnets. This work presents the magnet requirement and specification, design concept, recent simulation results and analysis of the magnetic field quality. A plan for prototype development is also discussed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4361 EP - 4363 KW - photon KW - quadrupole KW - sextupole KW - vacuum KW - multipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-FRXXPLM2 UR - http://jacow.org/ipac2019/papers/frxxplm2.pdf ER -