TY - CONF AU - Behtouei, M. AU - Faillace, L. AU - Migliorati, M. AU - Palumbo, L. AU - Spataro, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - New Analytical Derivation of Group Velocity in TW Accelerating Structures J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Ultra high-gradient accelerating structures are needed for the next generation of compact light sources. In the framework of the Compact Light XLS project, we are studying a high harmonic traveling-wave accelerating structure operating at a frequency of 35.982 GHz, in order to linearize the longitudinal space phase. In this paper, we propose a new analytical approach for the estimation of the group velocity in the structure and we compare it with numerical electromagnetic simulations that are carried out by using the code HFSS in the frequency domain. PB - JACoW Publishing CP - Geneva, Switzerland SP - 155 EP - 158 KW - cavity KW - dipole KW - simulation KW - polarization KW - coupling DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW030 UR - http://jacow.org/ipac2019/papers/mopgw030.pdf ER - TY - CONF AU - Blanco-García, O.R. AU - Antonelli, M. AU - Biagini, M.E. AU - Boscolo, M. AU - Cesarini, G. AU - Ciarma, A. AU - Collamati, F. AU - Guiducci, S. AU - Li Voti, R. AU - Raimondi, P. AU - Vaccarezza, C. AU - Variola, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Multi-Target Lattice for Muon Production From e⁺ Beam Annihilation on Target J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Low Emittance Muon Accelerator~(LEMMA) aims at producing small emittance muons from positron annihilation with electrons in a target. Given the low cross section of the production process, a large number of positrons on the target are required, exposing it to high power deposition and the beam to large degradation because of multiple scattering and bremstrahlung. A multi-target IP, and multi-IP line has been studied to reduce the power deposition per target and the degradation of the positron beam while preserving the number of muon pairs produced. The lattice copes with the focusing and transport of three beams at two different energies, the positron beam at 45 GeV, and µ⁺+ and µ⁻ beams at 22.5~GeV. Studies on the beam dynamics, number of targets, material and thickness of the targets are reported in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 578 EP - 581 KW - target KW - positron KW - emittance KW - lattice KW - site DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB003 UR - http://jacow.org/ipac2019/papers/moprb003.pdf ER - TY - CONF AU - D'Auria, G. AU - Aicheler, M. AU - Aksoy, A.A. AU - Alesini, D. AU - Apsimon, R. AU - Arnesano, J.M. AU - Bellaveglia, M. AU - Bernhard, A. AU - Bosco, F. AU - Buonomo, B. AU - Burt, G. AU - Calvi, M. AU - Cardelli, F. AU - Castaneda Cortes, H.M. AU - Castilla, A. AU - Clarke, J.A. AU - Croia, M. AU - Cross, A.W. AU - Dattoli, G. AU - Di Mitri, S. AU - Diomede, M. AU - Dowd, R.T. AU - Dunning, D.J. AU - Fang, W.D. AU - Faus-Golfe, A. AU - Ferrario, M. AU - Ficcadenti, L. AU - Gallo, A. AU - Gazis, E.N. AU - Gazis, N. AU - Geometrante, R. AU - Gethmann, J. AU - Giribono, A. AU - Goryashko, V.A. AU - Han, Y. AU - Jacewicz, M. AU - Janssen, X.J.A. AU - Kokole, M. AU - Latina, A. AU - Liu, X. AU - Luiten, O.J. AU - Marcos, J. AU - Marín, E. AU - Mostacci, A. AU - Mutsaers, P.H.A. AU - Muñoz Horta, R. AU - Nguyen, F. AU - Palumbo, L. AU - Petralia, A. AU - Piersanti, L. AU - Priem, J.M.A. AU - Pérez, F. AU - Rochow, R.A. AU - Rossi, C. AU - Ruber, R.J.M.Y. AU - Schmidt, T. AU - Schulte, D. AU - Spataro, B. AU - Stapnes, S. AU - Stragier, X.F.D. AU - Taylor, G. AU - Thompson, N. AU - Vaccarezza, C. AU - Wu, X.W. AU - Wuensch, W. AU - Zhang, K. AU - Zhang, L. AU - Zhu, D. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The CompactLight Design Study Project J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint,  as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1756 EP - 1759 KW - FEL KW - linac KW - electron KW - undulator KW - brightness DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB032 UR - http://jacow.org/ipac2019/papers/tuprb032.pdf ER - TY - CONF AU - Salvant, B. AU - Amorim, D. AU - Antipov, S.A. AU - Arsenyev, S. AU - Beck, M.S. AU - Biancacci, N. AU - Brüning, O.S. AU - Campelo, J.V. AU - Carideo, E. AU - Caspers, F. AU - Dalascu, T. AU - Farricker, A. AU - Grudiev, A. AU - Kaltenbacher, T. AU - Koukovini-Platia, E. AU - Kramer, P. AU - Lasheen, A. AU - Migliorati, M. AU - Mounet, N. AU - Métral, E. AU - Nagaoka, R. AU - Nasr Esfahani, N. AU - Persichelli, S. AU - Popovic, B.K. AU - Rijoff, T.L. AU - Rumolo, G. AU - Shaposhnikova, E.N. AU - Smaluk, V.V. AU - Spataro, B. AU - Vaccaro, V.G. AU - Vollinger, C. AU - Wang, N. AU - White, S.M. AU - Zannini, C. AU - Zotter, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Building the Impedance Model of a Real Machine J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A reliable impedance model of a particle accelerator can be built by combining the beam coupling impedances of all the components. This is a necessary step to be able to evaluate the machine performance limitations, identify the main contributors in case an impedance reduction is required, and study the interaction with other mechanisms such as optics nonlinearities, transverse damper, noise, space charge, electron cloud, beam-beam (in a collider). The main phases to create a realistic impedance model, and verify it experimentally, will be reviewed, highlighting the main challenges. Some examples will be presented revealing the levels of precision of machine impedance models that have been achieved. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2249 EP - 2254 KW - impedance KW - simulation KW - wakefield KW - coupling KW - cavity DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEYPLS1 UR - http://jacow.org/ipac2019/papers/weypls1.pdf ER - TY - CONF AU - Cioeta, F. AU - Alesini, D. AU - Ciambrella, M. AU - Cortis, D. AU - Marongiu, M. AU - Mostacci, A. AU - Pettinacci, V. AU - Variola, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A Numerical Analysis to Choose the Most Performing Optical Transition Radiation Screen J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Optical Transition Radiation (OTR) screen represents the most appropriate instrument to measure and verify the characteristics of a beam spot size produced by a particle accelerator. In order to measure such beam properties, OTR screens have to sustain thermal and mechanical stresses due to the energy that several bunches deposit. Owing to these requirements, it is essential to identify the more suitable material to optimize the OTR dimensions and to get reliable measures from the diagnostic system. In this paper, we describe a numerical procedure to choose the most performing material taking into account the physical requirements of a multi-bunch high brightness. The procedure is based on a dedicated ANSYS script able to evaluate the fatigue life time of the material considering a high number of thermal cycles generated by several bunches. The main characteristic of this script is the capability to simulate the real thermal and mechanical effect on the target that the hitting particle beam produces. The numerical procedure has been applied to compare the performance of three relevant materials-Aluminium, Silicon and Graphite simulating a beam hitting with well-known parameters. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2518 EP - 2521 KW - target KW - electron KW - radiation KW - brightness KW - site DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW022 UR - http://jacow.org/ipac2019/papers/wepgw022.pdf ER - TY - CONF AU - Faillace, L. AU - Behtouei, M. AU - Dolgashev, V.A. AU - Spataro, B. AU - Torrisi, G. AU - Variola, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Compact Ultra High-Gradient Ka-Band Accelerating Structure for Research, Medical and Industrial Applications J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Technological advancements are strongly required to fulfil demands for new accelerators devices from the compact or portable devices for radiotherapy to mo-bile cargo inspections and security, biology, energy and environmental applications, and ultimately for the next generation of colliders. In the frame of the collab-oration with INFN-LNF, SLAC (USA) we are working closely on design studies, fabrication and high-power operation of Ka-band accelerating structures. In par-ticular, new manufacturing techniques for hard-copper structures are being investigated in order to determine the maximum sustainable gradients above 150 MV/m and extremely low probability of RF breakdown. In this paper, the preliminary RF and mechanical design as well as beam dynamics estimations for a Ka-Band accelerating structure at 35 GHz are presented together with discussions on practical accelerating gradients and maximum average beam current throughput. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2842 EP - 2845 KW - linac KW - electron KW - accelerating-gradient KW - operation KW - gun DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB020 UR - http://jacow.org/ipac2019/papers/weprb020.pdf ER - TY - CONF AU - Torrisi, G. AU - Castorina, G. AU - Celona, L. AU - Dolgashev, V.A. AU - Faillace, L. AU - Gammino, S. AU - Leonardi, O. AU - Mauro, G.S. AU - Sorbello, G. AU - Spataro, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Low Power RF Test of a Quadrupole-free X-Band Mode Launcher for High Brightness Applications J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In this work we present the low power RF characterization of a novel TM01 X-band mode launcher for the new generation of high brightness RF photo-injectors. The proposed mode launcher exploits a fourfold symmetry which minimizes both the dipole and the quadrupole fields in order to mitigate the emittance growth in the early stages of the acceleration process. Two identical aluminum mode launchers have been assembled and measured in back-to-back configurations for three different central waveguide lengths. From the back-to-back results we infer the performance of each mode launcher. The low power RF test, performed at the Istituto Nazionale di Fisica Nucleare Laboratori Nazionali del Sud (INFN-LNS), validate both the numerical simulations and the quality of fabrication. An oxygen-free high-conductivity copper version of the device is being manufactured for high power and ultra high vacuum tests that are planned to be conducted at SLAC PB - JACoW Publishing CP - Geneva, Switzerland SP - 2856 EP - 2859 KW - GUI KW - brightness KW - quadrupole KW - simulation KW - electron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB024 UR - http://jacow.org/ipac2019/papers/weprb024.pdf ER - TY - CONF AU - Arnesano, J.M. AU - Diomede, M. AU - Ficcadenti, L. AU - Marongiu, M. AU - Mostacci, A. AU - Palumbo, L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of an X-Band Constant Impedance LINAC for Compact Light Project J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Within the framework of Horizon 2020 project, Compact Light, in order to provide a high performance, high-gradient X-band technology, for the new generation of hard X-ray FEL, a travelling wave (TW) Linac, working on 2pi/3 mode at 11.9952 GHz, fed by two types of asymmetrically couplers, has been designed. The design was performed using CST Microwave Studio frequency domain solver. First, simulations have been conduct in order to obtain the best trade-off between single cell’s parameters, varying iris aperture. Then, the both couplers, with and without pumping port, has been tuned to avoid reflections at the input port. Finally, the entire structure, with 5 cells, was simulated. The main structure parameters will be present and we will also show and discuss the acceleranting gradient obtained vary with linac lenght and input power. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3055 EP - 3058 KW - simulation KW - linac KW - quadrupole KW - impedance KW - framework DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB105 UR - http://jacow.org/ipac2019/papers/weprb105.pdf ER - TY - CONF AU - Marongiu, M. AU - Bisesto, F.G. AU - Chiadroni, E. AU - Cianchi, A. AU - Di Pirro, G. AU - Franzini, G. AU - Giribono, A. AU - Mostacci, A. AU - Palumbo, L. AU - Shpakov, V. AU - Stella, A. AU - Variola, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Simulation of the Transition Radiation Transport Through an Optic System J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Optical Transition Radiation (OTR) screens are widely used for beam profile measurements. The radiation is emitted when a charged particle beam crosses the boundary between two media with different optical properties. The main advantages of OTR are the instantaneous emission process allowing fast single shot measurements (i.e. bunch by bunch measurements in a multi bunch machine), and the good linearity with the beam charge (if coherent effects can be neglected). Furthermore, OTR angular distribution strongly depends on beam energy. Since OTR screens are typically placed in several positions along the Linac to monitor beam envelope, one may perform a distributed energy measurement along the machine: this will be useful, for instance, during the commissioning phase of a machine. This paper deals with the studies of an algorithm to optimize the generation and the transport of the transition radiation through an optic system using the simulation tool Zemax. The algorithm, in combination with a particle tracking code (i.e. Elegant), will allow to simulate the radiation generated by a beam and, so, to take into account beam divergence and energy spread or chromatic effects in the optic system. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3059 EP - 3062 KW - radiation KW - simulation KW - electron KW - optics KW - diagnostics DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB106 UR - http://jacow.org/ipac2019/papers/weprb106.pdf ER - TY - CONF AU - Weikum, M.K. AU - Akhter, T. AU - Alesini, D. AU - Alexandrova, A.S. AU - Anania, M.P. AU - Andreev, N.E. AU - Andriyash, I.A. AU - Aschikhin, A. AU - Audet, T. AU - Aßmann, R.W. AU - Bacci, A. AU - Barna, I.F. AU - Beaton, A. AU - Beck, A. AU - Beluze, A. AU - Bernhard, A. AU - Bielawski, S. AU - Bisesto, F.G. AU - Brandi, F. AU - Brinkmann, R. AU - Bründermann, E. AU - Bussmann, M.H. AU - Bussolino, G. AU - Büscher, M. AU - Chancé, A. AU - Chen, M. AU - Chiadroni, E. AU - Cianchi, A. AU - Clarke, J.A. AU - Cole, J. AU - Couprie, M.-E. AU - Croia, M. AU - Cros, B. AU - Crump, P.A. AU - Dattoli, G. AU - De Nicola, S. AU - Del Dotto, A. AU - Delerue, N. AU - Dias, J.M. AU - Dorda, U. AU - Fedele, R. AU - Ferran Pousa, A. AU - Ferrario, M. AU - Filippi, F. AU - Fiore, G. AU - Fonseca, R.A. AU - Galimberti, M. AU - Gallo, A. AU - Ghaith, A. AU - Giove, D. AU - Giribono, A. AU - Gizzi, L.A. AU - Grüner, F.J. AU - Habib, A.F. AU - Haefner, C. AU - Heinemann, T. AU - Hidding, B. AU - Holzer, B.J. AU - Hooker, S.M. AU - Hosokai, T. AU - Huebner, M. AU - Irman, A. AU - Jafarinia, F. AU - Jaroszynski, D.A. AU - Joshi, C. AU - Kaluza, M. AU - Kando, M. AU - Karger, O.S. AU - Karsch, S. AU - Khazanov, E. AU - Khikhlukha, D. AU - Knetsch, A. AU - Kocon, D. AU - Koester, P. AU - Kononenko, O.S. AU - Korn, G. AU - Kostyukov, I. AU - Kruchinin, K.O. AU - Labate, L. AU - Le Blanc, C. AU - Lechner, C. AU - Leemans, W. AU - Lehrach, A. AU - Li, X. AU - Libov, V. AU - Lifschitz, A. AU - Litvinenko, V. AU - Lu, W. AU - Lundh, O. AU - Maier, A.R. AU - Malka, V. AU - Manahan, G.G. AU - Mangles, S.P.D. AU - Marchetti, B. AU - Martinez de la Ossa, A. AU - Martins, J.L. AU - Mason, P.D. AU - Massimo, F. AU - Mathieu, F. AU - Maynard, G. AU - Mazzotta, Z. AU - Molodozhentsev, A.Y. AU - Mostacci, A. AU - Murphy, C.D. AU - Müller, A.-S. AU - Najmudin, Z. AU - Nghiem, P.A.P. AU - Nguyen, F. AU - Niknejadi, P. AU - Osterhoff, J. AU - Oumbarek Espinos, D. AU - Papadopoulos, D.N. AU - Patrizi, B. AU - Pattathil, R. AU - Petrillo, V. AU - Pocsai, M.A. AU - Poder, K. AU - Pompili, R. AU - Pribyl, L. AU - Pugacheva, D. AU - Romeo, S. AU - Rossetti Conti, M. AU - Rossi, A.R. AU - Rossmanith, R. AU - Roussel, E. AU - Sahai, A.A. AU - Sarri, G. AU - Schaper, L. AU - Scherkl, P. AU - Schramm, U. AU - Schroeder, C.B. AU - Scifo, J. AU - Serafini, L. AU - Sheng, Z.M. AU - Siders, C. AU - Silva, L.O. AU - Silva, T. AU - Simon, C. AU - Sinha, U. AU - Specka, A. AU - Streeter, M.J.V. AU - Svystun, E.N. AU - Symes, D. AU - Szwaj, C. AU - Tauscher, G.E. AU - Terzani, D. AU - Thompson, N. AU - Toci, G. AU - Tomassini, P. AU - Torres, R. AU - Ullmann, D. AU - Vaccarezza, C. AU - Vannini, M. AU - Vieira, J.M. AU - Villa, F. AU - Wahlstrom, C.-G. AU - Walczak, R. AU - Walker, P.A. AU - Wang, K. AU - Welsch, C.P. AU - Wiggins, S.M. AU - Wolfenden, J. AU - Xia, G.X. AU - Yabashi, M. AU - Zhu, J. AU - Zigler, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Status of the Horizon 2020 EuPRAXIA Conceptual Design Study J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to FEL pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for HEP detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3638 EP - 3642 KW - plasma KW - laser KW - electron KW - acceleration KW - site DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPGW026 UR - http://jacow.org/ipac2019/papers/thpgw026.pdf ER - TY - CONF AU - Albright, S.C.P. AU - Quartullo, D. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Time Varying RF Phase Noise for Longitudinal Emittance Blow-Up J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - RF phase noise was shown to be effective for controlled longitudinal emittance blow-up in the Proton Synchrotron Booster (PSB) at CERN during beam tests in 2017, with further developments in 2018. At CERN, RF phase noise is used operationally in the Super Proton Synchrotron (SPS) and Large Hadron Collider (LHC). In this paper we show that it is suitable for operation with a variety of beam types in the PSB. In the PSB the synchrotron frequency changes by approximately a factor 4 during the 500 ms acceleration ramp, requiring large changes in the frequency band of the noise. During 2018, a new method of calculating the noise parameters has been demonstrated, which gives upper and lower bounds to the noise frequency band that are smoothly varying through the ramp. The new calculation method has been applied to operational beams accelerated in both single and double RF harmonics, the final results are presented here. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3954 EP - 3957 KW - synchrotron KW - emittance KW - operation KW - proton KW - extraction DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB067 UR - http://jacow.org/ipac2019/papers/thprb067.pdf ER - TY - CONF AU - Teofili, L. AU - Giordano, F. AU - Lamas, I. AU - Marongiu, M. AU - Migliorati, M. AU - Nuiry, F.-X. AU - Romagnoli, G. AU - Salvant, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Analysis on the Thermal Response to Beam Impedance Heating of the Post Ls2 Proton Synchrotron Beam Dump J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The High Luminosity Large Hadron Collider (HL-LHC) and the LIU (LHC-Injection Upgrade) projects at CERN are upgrading the whole CERN accelerators chain, increasing beam brightness and intensity. In this scenario, some critical machine components have to be redesigned and rebuilt. Due to the increase in beam intensity, minimizing the electromagnetic interaction between the beam and the device is a crucial design task. Indeed, these interactions could lead to beam instabilities and excessive thermo-mechanical loadings in the device. In this context, this paper presents an example of multi-physics study to investigate the impedance related thermal effects. The analysis is performed on the conceptual design of the new proton synchrotron (PS) internal dump. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4260 EP - 4263 KW - impedance KW - simulation KW - proton KW - site KW - wakefield DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS065 UR - http://jacow.org/ipac2019/papers/thpts065.pdf ER -