TY - CONF AU - Kondo, C. AU - Fukami, K. AU - Fukui, T. AU - Nakazawa, S. AU - Nishimori, N. AU - Saji, C. AU - Takano, S. AU - Tanaka, H. AU - Watanabe, T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Digital Control System of High Precision Magnet Power Supply for SPring-8-II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - For the SPring-8 upgrade plan, SPring-8-II, a variety of magnet power supplies (PS) from 10 W to larger than 100 kW with a high current stability of about 10 ppm (pk-pk, typ.) are required. In order to develop the PSs within a given time and budget, we plan to use a common control system based on a digital control technology that can be adopted for the variety and the high precision PSs. The system consists of a high-precision analog-digital converter (ADC) circuit and a field programmable gate array (FPGA). Since the precision of the ADC circuit determines the current stability of the PS, we first developed the ADC circuit of high accuracy of less than 10 ppm (pk-pk). A proportional-integral (PI) control logic and a digital pulse width modulation (PWM) function was implemented in the FPGA firmware. These functions can be easily modified for each power supply by a desktop computer. We prototyped a DC power supply equipped with the newly developed digital feedback control system and confirmed that the current fluctuation was suppressed to less than 10 ppm (pk-pk). In the presentation, we will report the current status and future perspective of our power supply development including the evaluation results of the new circuits and the power supply we have developed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1259 EP - 1262 KW - controls KW - feedback KW - power-supply KW - FPGA KW - synchrotron-radiation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP014 UR - http://jacow.org/ipac2019/papers/tupmp014.pdf ER - TY - CONF AU - Tamura, K. AU - Bizen, T. AU - Masaki, M. AU - Ohkuma, H. AU - Oishi, M. AU - Shoji, M. AU - Takahashi, S. AU - Taniuchi, Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Feasibility Tests of a Vacuum System for SPring-8-II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - For SPring-8-II, the major upgrade of SPring-8, a test half-cell including permanent/electro magnets and a vacuum system was constructed, and hardware feasibility tests have been performed since 2017. Features of the SPring-8-II vacuum system are 1) introduction of the concept of a stainless steel 12 m-long integral chamber (LIC) with a welded structure, and 2) adoption of ex-situ baking of the chamber. The 12 m LIC with a narrow aperture, flangeless structure and a minimum number of bellows was designed so that the vacuum system could be installed without interference with the magnets of a narrow bore diameter aligned on girders with a severe packing factor. For replacement of the existing system with a new one in a short black-out period, the 12 m LIC is planned to be moved into the accelerator tunnel with keeping ultra-high vacuum (UHV) by closing thin gate valves at both ends, after evacuation to UHV by ex-situ baking and NEG activation. This presentation will overview the vacuum system, mainly the 12 m LIC, developed for the test half-cell, and describe the vacuum performance and the result of the assembly test conducted with the permanent/electro magnets. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1272 EP - 1275 KW - vacuum KW - photon KW - hardware KW - multipole KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP018 UR - http://jacow.org/ipac2019/papers/tupmp018.pdf ER - TY - CONF AU - Nishimori, N. AU - Tanaka, H. AU - Watanabe, T. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A Highly Brilliant Compact 3 GeV Light Source Project in Japan J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A highly brilliant compact 3 GeV light source project was proposed in Japan. The light source would be constructed in Sendai, north-east part of Japan. It provides brilliant soft X-ray beam to widely cover wavelengths ranging from EUV to hard X-ray in Japan together with SPring-8. The accelerator system is now mostly designed except for several linac components and so on. We have chosen a 4-bend achromat lattice to achieve a low emittance keeping a small circumference with a rather relaxed space issue. The number of cells is 16 and the ring circumference is about 350 m. Number of available beam lines are 26 including short straight sections for multi-pole wigglers. Horizontal emittance is expected to be around 1.1 nmrad, and the maximum brilliance may exceed 10²¹ at 1 - 3 keV region with a stored current of 400 mA. The designs of many components such as vacuum chambers, magnets and monitors are employed from those studied for SPring-8 upgrade project. A full energy injector linac equipped with a thermionic gun and C-band accelerating structures is employed to produce sufficiently low emittance beams for efficient beam injections. The C-band system is adopted from those developed for XFEL SACLA with some modifications. In the future, the injector would be upgraded as an electron driver for SXFEL. Details of the project and accelerator system will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1478 EP - 1481 KW - emittance KW - cavity KW - storage-ring KW - injection KW - linac DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW035 UR - http://jacow.org/ipac2019/papers/tupgw035.pdf ER - TY - CONF AU - Togawa, K. AU - Hara, T. AU - Tanaka, H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design Study of Nonlinear Energy Chirp Correction Using Sextupole Magnets at the Soft X-Ray Free-Electron Laser Beamline of SACLA J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - At the x-ray free-electron laser (FEL) facility, SACLA, a soft x-ray FEL beamline (SCSS+) is driven by a dedicated 800-MeV electron accelerator and being operated in parallel with two hard x-ray FEL beamlines. Responding to the demands of short laser pulses from users, a nonlinearity correction system using sextupole magnets is under consideration to obtain shorter electron bunches. Since the frequency of the SCSS+ injector is S-band, the nonlinearity correction of a bunch compression process using a harmonic correction cavity is not so efficient as the SACLA injector, whose frequency of the injector is L-band. Instead of a complex and costly correction cavity system, the sextupole magnets are simply installed in a dispersive section of the first bunch compressor chicane. In this report, we will present the basic design concept and some detail studies of the nonlinear correction. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1782 EP - 1784 KW - sextupole KW - FEL KW - electron KW - linac KW - cavity DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB042 UR - http://jacow.org/ipac2019/papers/tuprb042.pdf ER - TY - CONF AU - Takano, S. AU - Akikawa, H. AU - Fukami, K. AU - Hamato, K. AU - Hara, T. AU - Inagaki, T. AU - Kataoka, J. AU - Kondo, C. AU - Kusano, K. AU - Masaki, M. AU - Ogata, K. AU - Oishi, M. AU - Saito, Y. AU - Sato, K. AU - Shoji, M. AU - Tamura, K. AU - Tanaka, H. AU - Taniuchi, T. AU - Watanabe, T. AU - Yanagida, K. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Renovation of Off-Axis Beam Injection Scheme for Next-Generation Photon Sources J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Photon sources are looking for performance upgrades by pursuing higher photon brilliance and coherence these years. The trend is pushing the lattice design to lower the beam emittance, which naturally results in the narrower dynamic aperture. One bottleneck in the upgrades is a beam injection system capable of accumulating required beam intensity and keeping top-up operations with such narrow apertures. Beam injection with a nonlinear kicker and transverse/longitudinal on-axis injections are now in the limelight. However, these techniques still need time to be put into practical use. We take an alternative approach for the SPring-8 upgrade, SPring-8-II, renovating the off-axis beam injection scheme to address the following requirements for the coming diffraction-limited storage rings (DLSRs): minimizing of both injection beam amplitude and perturbation to stored beam, and topping-up functionality. This presentation will overview the renewed off-axis beam injection scheme and report the development status of the following three key components: 1) permanent magnet based DC septum magnet, 2) in-vacuum pulse septum magnet, and 3) twin kickers driven by a single solid state pulser. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2318 EP - 2321 KW - septum KW - injection KW - vacuum KW - kicker KW - photon DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP009 UR - http://jacow.org/ipac2019/papers/wepmp009.pdf ER - TY - CONF AU - Fukui, T. AU - Hara, T. AU - Hasegawa, T. AU - Hosoda, N. AU - Inagaki, T. AU - Maesaka, H. AU - Matsubara, S. AU - Morimoto, O. AU - Ohshima, T. AU - Okada, K. AU - Tajiri, Y. AU - Tanaka, H. AU - Tanaka, S. AU - Yamaga, M. AU - Yoshioka, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Design of the Control System for the SACLA/SPring-8 Accelerator Complex to Use the LINAC of SACLA for a Full-Energy Injector of SPring-8 J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - At the SPring-8 site, the X-ray free electron laser facili-ty, SACLA, and the third-generation light source, SPring-8 storage ring, have been operated. On the SPring-8 up-grade project we have a plan to use the linac of SACLA as a full-energy injector of the storage ring. To achieve the SACLA’s user operation and the beam injection to the storage ring in parallel, it is necessary to control the beam energy and the peak current on a pulse by pulse. The demand for an injection occurs anytime during the top-up operation of the storage ring. For this purpose, two accel-erators should be controlled seamlessly and the SACLA has to provide the low emittance electron beam to gener-ate X-ray laser and to be an injector of the storage ring simultaneously. Because SACLA has to control the beam energy and peak current on a pulse by pulse, we are de-signing a system to meet these requirements. A master controller stores a pattern of parameters required for the low-level RF controllers. Each pattern consists of 60 rows which correspond to the parameters for one second with a beam repetition rate of the SACLA, 60Hz. The master sends the parameters to the controllers with reflective memory. We can select the pattern every second on de-mand and it is flexible enough for the top-up operation of the storage ring. Also the data of low-level RF and beam position monitor are stored into the database with a beam repetition rate. In this paper, we report the design of con-trol system for SACLA/SPring-8 to control the beam energy and the peak current on a pulse by pulse. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2529 EP - 2531 KW - controls KW - database KW - operation KW - storage-ring KW - injection DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW029 UR - http://jacow.org/ipac2019/papers/wepgw029.pdf ER - TY - CONF AU - Maesaka, H. AU - Fukui, T. AU - Hara, T. AU - Hasegawa, T. AU - Hosoda, N. AU - Inagaki, T. AU - Kondo, C. AU - Matsubara, S. AU - Morimoto, O. AU - Ohshima, T. AU - Okada, K. AU - Tajiri, Y. AU - Tanaka, H. AU - Tanaka, S. AU - Yamaga, M. AU - Yoshioka, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - On-Demand Beam Route and RF Parameter Switching System for Time-Sharing of a Linac for X-ray Free-Electron Laser as an Injector to a 4th-Generation Synchrotron Radiation Source J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - We have an upgrade plan of the SPring-8 storage ring to provide much more brilliant X-rays with a low-emittance electron beam. Since the upgraded ring requires a low-emittance injection beam, we are planning to timeshare the linac of the X-ray free electron laser (XFEL) facility, SACLA, as an injector for the upgraded ring. The SACLA linac delivers low-emittance and short-bunch electron beams to two XFEL beamlines with a 60 Hz repetition rate. The beam route is right now equally changed by a kicker magnet at a switchyard. The beam parameter is also optimized for each XFEL beamline by changing RF parameters pulse-by-pulse with simple software at this moment*. Since the number of beam injection shots to the storage ring is much less frequent than XFEL shots, one of the XFEL shots must be overridden by an injection with on-demand basis. In addition, the beam quality, such as 1 mm mrad normalized emittance, 10 fs bunch length and 10 kA peak current, must be maintained not to deteriorate the XFEL performance. Therefore, we have developed an on-demand beam route and RF parameter switching system with sufficient speed, precision and reliability. A beam route data is transmitted to each accelerator unit by a reflective memory network, and special software changes the parameters of each accelerator unit pulse-by-pulse according to the received data. We tested the on-demand switching system at a test bench and the SACLA linac. The beam parameters were appropriately controlled with a negligible failure rate. The user service of the beam injection from SACLA to SPring-8 is scheduled in 2020 and the on-demand switching system is almost ready for the time-sharing operation of multiple XFEL beamlines and a SPring-8 injection. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3427 EP - 3430 KW - linac KW - FEL KW - electron KW - injection KW - controls DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THYYPLS1 UR - http://jacow.org/ipac2019/papers/thyypls1.pdf ER - TY - CONF AU - Weikum, M.K. AU - Akhter, T. AU - Alesini, D. AU - Alexandrova, A.S. AU - Anania, M.P. AU - Andreev, N.E. AU - Andriyash, I.A. AU - Aschikhin, A. AU - Audet, T. AU - Aßmann, R.W. AU - Bacci, A. AU - Barna, I.F. AU - Beaton, A. AU - Beck, A. AU - Beluze, A. AU - Bernhard, A. AU - Bielawski, S. AU - Bisesto, F.G. AU - Brandi, F. AU - Brinkmann, R. AU - Bründermann, E. AU - Bussmann, M.H. AU - Bussolino, G. AU - Büscher, M. AU - Chancé, A. AU - Chen, M. AU - Chiadroni, E. AU - Cianchi, A. AU - Clarke, J.A. AU - Cole, J. AU - Couprie, M.-E. AU - Croia, M. AU - Cros, B. AU - Crump, P.A. AU - Dattoli, G. AU - De Nicola, S. AU - Del Dotto, A. AU - Delerue, N. AU - Dias, J.M. AU - Dorda, U. AU - Fedele, R. AU - Ferran Pousa, A. AU - Ferrario, M. AU - Filippi, F. AU - Fiore, G. AU - Fonseca, R.A. AU - Galimberti, M. AU - Gallo, A. AU - Ghaith, A. AU - Giove, D. AU - Giribono, A. AU - Gizzi, L.A. AU - Grüner, F.J. AU - Habib, A.F. AU - Haefner, C. AU - Heinemann, T. AU - Hidding, B. AU - Holzer, B.J. AU - Hooker, S.M. AU - Hosokai, T. AU - Huebner, M. AU - Irman, A. AU - Jafarinia, F. AU - Jaroszynski, D.A. AU - Joshi, C. AU - Kaluza, M. AU - Kando, M. AU - Karger, O.S. AU - Karsch, S. AU - Khazanov, E. AU - Khikhlukha, D. AU - Knetsch, A. AU - Kocon, D. AU - Koester, P. AU - Kononenko, O.S. AU - Korn, G. AU - Kostyukov, I. AU - Kruchinin, K.O. AU - Labate, L. AU - Le Blanc, C. AU - Lechner, C. AU - Leemans, W. AU - Lehrach, A. AU - Li, X. AU - Libov, V. AU - Lifschitz, A. AU - Litvinenko, V. AU - Lu, W. AU - Lundh, O. AU - Maier, A.R. AU - Malka, V. AU - Manahan, G.G. AU - Mangles, S.P.D. AU - Marchetti, B. AU - Martinez de la Ossa, A. AU - Martins, J.L. AU - Mason, P.D. AU - Massimo, F. AU - Mathieu, F. AU - Maynard, G. AU - Mazzotta, Z. AU - Molodozhentsev, A.Y. AU - Mostacci, A. AU - Murphy, C.D. AU - Müller, A.-S. AU - Najmudin, Z. AU - Nghiem, P.A.P. AU - Nguyen, F. AU - Niknejadi, P. AU - Osterhoff, J. AU - Oumbarek Espinos, D. AU - Papadopoulos, D.N. AU - Patrizi, B. AU - Pattathil, R. AU - Petrillo, V. AU - Pocsai, M.A. AU - Poder, K. AU - Pompili, R. AU - Pribyl, L. AU - Pugacheva, D. AU - Romeo, S. AU - Rossetti Conti, M. AU - Rossi, A.R. AU - Rossmanith, R. AU - Roussel, E. AU - Sahai, A.A. AU - Sarri, G. AU - Schaper, L. AU - Scherkl, P. AU - Schramm, U. AU - Schroeder, C.B. AU - Scifo, J. AU - Serafini, L. AU - Sheng, Z.M. AU - Siders, C. AU - Silva, L.O. AU - Silva, T. AU - Simon, C. AU - Sinha, U. AU - Specka, A. AU - Streeter, M.J.V. AU - Svystun, E.N. AU - Symes, D. AU - Szwaj, C. AU - Tauscher, G.E. AU - Terzani, D. AU - Thompson, N. AU - Toci, G. AU - Tomassini, P. AU - Torres, R. AU - Ullmann, D. AU - Vaccarezza, C. AU - Vannini, M. AU - Vieira, J.M. AU - Villa, F. AU - Wahlstrom, C.-G. AU - Walczak, R. AU - Walker, P.A. AU - Wang, K. AU - Welsch, C.P. AU - Wiggins, S.M. AU - Wolfenden, J. AU - Xia, G.X. AU - Yabashi, M. AU - Zhu, J. AU - Zigler, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Status of the Horizon 2020 EuPRAXIA Conceptual Design Study J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to FEL pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for HEP detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3638 EP - 3642 KW - plasma KW - laser KW - electron KW - acceleration KW - site DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPGW026 UR - http://jacow.org/ipac2019/papers/thpgw026.pdf ER - TY - CONF AU - Ohshima, T. AU - Hosoda, N. AU - Maesaka, H. AU - Matsubara, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Timing Synchronization System for Beam Injection from the SACLA Linac to the SPring-8 Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - We developed a timing synchronization system for beam injections from the linac of the X-ray free-electron laser (XFEL), SACLA, to the current SPring-8 storage ring. This injection scheme is beneficial for the next upgraded ring, SPring-8-II, where low emittance injection beams is required. The developed timing system aims at synchronizing the timing between the RF frequencies of the two accelerators which do not have a common subharmonic frequency. An important point is to keep the high performance of the current timing system which provides stable XFEL operation at SACLA. For this purpose, we designed and constructed a MicroTCA.4 system comprised of a high-speed ADC and an RF front-end for the synchronization. The RF signal of SACLA is digitized by the ADC whose clock is synchronized to SPring-8. A digital down-converter in the FPGA on the ADC module gives the phase difference instantaneously and a feedback logic applies a frequency modulation (FM) to the master oscillator of SACLA so as to synchronize SACLA with SPring-8. A bench test result showed that the timing jitter between the two frequency at injection timing was 1.2 ps rms, which was sufficient for the required value of 3 ps rms for the beam injection to the ring. In this presentation, we report an overview of the synchronization system, details of the developed electronics and the system performance obtained by a beam injection experiment from SACLA to SPring-8. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3882 EP - 3885 KW - timing KW - linac KW - injection KW - storage-ring KW - laser DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB034 UR - http://jacow.org/ipac2019/papers/thprb034.pdf ER - TY - CONF AU - Fukami, K. AU - Aoki, T. AU - Azumi, N. AU - Inoue, S.I. AU - Kai, T. AU - Kimura, H. AU - Kiuchi, J. AU - Matsubara, S. AU - Matsui, S. AU - Takano, S. AU - Taniuchi, T. AU - Watanabe, T. AU - Yanagida, K. AU - Zhang, C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Magnet Developments and Precise Alignment Schemes for SPring-8-II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The magnet lattice design of the SPring-8 upgrade, SPring-8-II, is a five bend achromat composed of one normal and four longitudinal gradient bending magnets. Permanent magnet has been chosen for both types of the dipoles, and the high gradient multipole magnets are all electromagnets. This presentation will overview the magnet developments and precise alignment schemes for SPring-8-II, focusing specifically on the following features. Temperature insensitive magnetic circuits with a function of fine magnetic field tuning have been developed for the permanent magnet dipoles. Narrow bore multipole magnets with compact coil assemblies have been designed. We optimized the shimming for enough good field regions, and minimized ohmic loss at the coils for suppressing thermal deformation. To improve the accuracy of vibrating wire magnet alignment, practical wire sag distributions have been quantitatively evaluated. In 2018, a test half-cell was constructed by which the feasibilities of the magnets and the overall alignment precisions including the effects of the thermal deformation of magnets, a repeatability of magnet reassembly has been confirmed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4158 EP - 4160 KW - alignment KW - multipole KW - lattice KW - sextupole KW - quadrupole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS024 UR - http://jacow.org/ipac2019/papers/thpts024.pdf ER - TY - CONF AU - Huang, J.C. AU - Kitamura, H. AU - Kohda, T. AU - Yang, C.K. AU - Yang, C.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Performance of TPS Cryogenic Permanent Magnet Undulators at NSRRC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Development of cryogenic permanent magnet un-dulators (CPMUs) is the most recent activity for Phase-II beamlines at the Taiwan Photon Source. A hybrid-type CPMU with a period length of 15 mm, based on PrFeB permanent-magnet materials, is under construc-tion. A maximum effective magnetic field of 1.33 T at a gap of 4 mm is obtained at 80 K. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4278 EP - 4280 KW - undulator KW - vacuum KW - permanent-magnet KW - cryogenics KW - controls DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS071 UR - http://jacow.org/ipac2019/papers/thpts071.pdf ER -