TY  - CONF
AU  - Korysko, P.
AU  - Burrows, P.
AU  - Latina, A.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Intensity Dependent Effects in the ILC BDS
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - The International Linear Collider (ILC) is an electron-positron collider being considered for the post-LHC era. Its Beam Delivery System (BDS) receives the beam from the main linac. This beam is then focused to the nanometer scale after going through collimators, beam diagnostic systems, strong magnets, etc. Effects such as wakefields due to resistive-wall, BPMs and collimators make the system very sensitive to the beam intensity. Understanding these effects is crucial in order to demonstrate that the nominal beam size at the Interaction Point (IP) can be reached in realistic scenarios. In this paper, results of the intensity dependence effects in the ILC BDS, simulated with PLACET, are presented.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 305
EP  - 307
KW  - wakefield
KW  - luminosity
KW  - collider
KW  - simulation
KW  - linear-collider
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-MOPGW085
UR  - http://jacow.org/ipac2019/papers/mopgw085.pdf
ER  - 

TY  - CONF
AU  - Korysko, P.
AU  - Burrows, P.
AU  - Faus-Golfe, A.
AU  - Kubo, K.
AU  - Latina, A.
AU  - Okugi, T.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Intensity Dependent Effects at ATF2, KEK
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - The Accelerator Test Facility 2 (ATF2) at KEK is a prototype for the Final Focus Systems of the future e⁺e⁻ linear colliders, the International Linear Collider (ILC) and the Compact Linear Collider (CLIC). In this paper both simulation and experimental results are presented with special emphasis on intensity-dependent effects. The importance of these effects is shown using the PLACET code and realistic ATF2 machine simulations (including beam jitter, misalignment, wakefield, Beam Based Alignment (BBA) correction, …). The latest experimental results are also presented, in particular the impact of the beam intensity on the beam size at the IP.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 308
EP  - 311
KW  - simulation
KW  - collider
KW  - linear-collider
KW  - wakefield
KW  - electron
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-MOPGW086
UR  - http://jacow.org/ipac2019/papers/mopgw086.pdf
ER  - 

TY  - CONF
AU  - Santamaría García, A.
AU  - Antoniou, F.
AU  - Bartosik, H.
AU  - Briz Monago, J.A.
AU  - Di Giovanni, G.P.
AU  - Guerrero, A.
AU  - Hunt, J.R.
AU  - Mikulec, B.
AU  - Roncarolo, F.
AU  - Senes, E.
AU  - Vlachoudis, V.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Study of the Transverse Emittance Blow-Up Along the Proton Synchrotron Booster Cycle During Wire Scanner Operation
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - Transverse emittance measurements with wire scanners have been extensively studied across the accelerator complex at CERN due to their important role in characterizing the beam and their complicated modeling. In recent years, this topic has been of particular interest for the LHC Injectors Upgrade (LIU) project, where a tight transverse emittance blow-up budget between the Proton Synchrotron Booster (PSB) and the Proton Synchrotron (PS) is imposed to assure the required beam brightness for the High Luminosity LHC (HL-LHC). In order to maintain a high brightness beam, any source of emittance blow-up along the PSB cycle needs to be identified and mitigated. While wire scanners have been mostly used at extraction energy in the PSB, they can also operate along the energy cycle. The scattering of the protons with the wire increases considerably at lower energies, leading to an overestimation of the beam emittance. In this contribution we present the most recent studies, focusing on precisely quantifying the blow-up created by the flying wire with measurements in an optimized set-up and compared to FLUKA simulations.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 1110
EP  - 1113
KW  - emittance
KW  - simulation
KW  - proton
KW  - scattering
KW  - brightness
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-MOPTS101
UR  - http://jacow.org/ipac2019/papers/mopts101.pdf
ER  - 

TY  - CONF
AU  - Korostelev, M.
AU  - Singh, B.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Alternative Lattice Design for Diamond-II
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - Plans for upgrade of the Diamond Light Source aim to reduce beam emittance by a factor of 20 or better. This is motivated by demand for photon flux with significantly high brightness and transverse coherence. The baseline lattice design for the Diamond-II upgrade has been recently proposed, however alternative design are under investigation to reduce the emittance even further. This paper presents a new lattice design based on implementation of bending magnets with transverse field gradient only.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 1593
EP  - 1596
KW  - lattice
KW  - emittance
KW  - sextupole
KW  - dipole
KW  - optics
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-TUPGW080
UR  - http://jacow.org/ipac2019/papers/tupgw080.pdf
ER  - 

TY  - CONF
AU  - Nghiem, P.A.P.
AU  - Alesini, D.
AU  - Aschikhin, A.
AU  - Audet, T.
AU  - Aßmann, R.W.
AU  - Beck, A.
AU  - Chancé, A.
AU  - Chen, M.
AU  - Chiadroni, E.
AU  - Cianchi, A.
AU  - Clarke, J.A.
AU  - Couprie, M.-E.
AU  - Croia, M.
AU  - Cros, B.
AU  - Dattoli, G.
AU  - Del Dotto, A.
AU  - Delerue, N.
AU  - Dorda, U.
AU  - Ferran Pousa, A.
AU  - Ferrario, M.
AU  - Fonseca, R.A.
AU  - Ghaith, A.
AU  - Giribono, A.
AU  - Gizzi, L.A.
AU  - Helm, A.
AU  - Hidding, B.
AU  - Hooker, S.M.
AU  - Ibison, M.G.
AU  - Jaroszynski, D.A.
AU  - Kruchinin, K.O.
AU  - Labate, L.
AU  - Lee, P.
AU  - Li, F.Y.
AU  - Li, X.
AU  - Libov, V.
AU  - Marchetti, B.
AU  - Martinez de la Ossa, A.
AU  - Marx, D.
AU  - Massimo, F.
AU  - Mathieu, F.
AU  - Maynard, G.
AU  - Mazzotta, Z.
AU  - Mehrling, T.J.
AU  - Molodozhentsev, A.Y.
AU  - Mosnier, A.
AU  - Mostacci, A.
AU  - Najmudin, Z.
AU  - Nguyen, F.
AU  - Niknejadi, P.
AU  - Oumbarek Espinos, D.
AU  - Pattathil, R.
AU  - Pompili, R.
AU  - Romeo, S.
AU  - Rossi, A.R.
AU  - Schaper, L.
AU  - Sheng, Z.M.
AU  - Shpakov, V.
AU  - Silva, L.O.
AU  - Silva, T.
AU  - Simon, C.
AU  - Specka, A.
AU  - Stella, A.
AU  - Streeter, M.J.V.
AU  - Svystun, E.N.
AU  - Symes, D.
AU  - Terzani, D.
AU  - Toci, G.
AU  - Tomassini, P.
AU  - Vaccarezza, C.
AU  - Vieira, J.M.
AU  - Vujanovic, M.
AU  - Walczak, R.
AU  - Walker, P.A.
AU  - Weikum, M.K.
AU  - Welsch, C.P.
AU  - Weng, S.M.
AU  - Wiggins, S.M.
AU  - Wolfenden, J.
AU  - Yoffe, S.
AU  - Zhu, J.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - The EuPRAXIA project aims at designing the world’s first accelerator based on plasma-wakefield advanced technique, which can deliver a 5 GeV electron beam with simultaneously high charge, low emittance and low energy spread to user’s communities. Such challenging objectives can only have a chance to be achieved when particular efforts are dedicated to identify the subsequent issues and to find the way to solve them. Many injection/acceleration schemes and techniques have been explored by means of thorough simulations in more than ten European institutes to sort out the most appropriate ones. The specific issues of high charge, high beam quality and beam extraction then transfer to the user’s applications, have been tackled with many innovative approaches*. This article highlights the different advanced methods that have been employed by the EuPRAXIA collaboration and the preliminary results obtained. The needs in terms of laser and plasma parameters for such an accelerator are also summarized.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 2291
EP  - 2295
KW  - plasma
KW  - laser
KW  - injection
KW  - acceleration
KW  - emittance
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-WEZZPLS2
UR  - http://jacow.org/ipac2019/papers/wezzpls2.pdf
ER  - 

TY  - CONF
AU  - Paszkiewicz, J.
AU  - Burrows, P.
AU  - Wuensch, W.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Spatially Resolved Dark Current in High Gradient Traveling Wave Structures
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - High-gradient accelerating structures are known to produce field-emitted current from regions of high surface field, which are captured and accelerated by the fields within the structure. This current is routinely measured in structures under test in the CLIC high-gradient test stands using Faraday cups. This paper presents a novel technique to spatially resolve the longitudinal distribution of field emitted current by analysing downstream Faraday cup signals when the structure is fed with RF pulses much shorter than its filling time. Results from this method applied to X-band cavities operating at 100 MV/m are presented, and are compared to breakdown position distributions. A decay in emitted current as conditioning progressed in regions with a low breakdown rate and large jumps in regions with a large breakdown rate are observed.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 2956
EP  - 2959
KW  - electron
KW  - linac
KW  - diagnostics
KW  - site
KW  - collider
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-WEPRB062
UR  - http://jacow.org/ipac2019/papers/weprb062.pdf
ER  - 

TY  - CONF
AU  - Sheehy, S.L.
AU  - Egerton, A.J.
AU  - Steinberg, A.
AU  - Wroe, L.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - How Robust Are Existing Medical Linacs in Challenging Environments? A Study of Down Time and Failure Causes.
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - There is a severe lack of radiotherapy linear accelerators (LINACs) in Low- and Middle-Income countries (LMICs), limiting capacity for cancer care in these regions. Anecdotally, operating high tech accelerators in environments with power fluctuations, harsh climatic conditions and geographic isolation leads to large failure rates and downtime. To guide future developments, this study presents a data-driven approach to collect statistical data on LINAC downtime and failure modes, comparing to a simple availability model.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 3530
EP  - 3532
KW  - linac
KW  - controls
KW  - electron
KW  - vacuum
KW  - gun
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-THPMP039
UR  - http://jacow.org/ipac2019/papers/thpmp039.pdf
ER  - 

TY  - CONF
AU  - Weikum, M.K.
AU  - Akhter, T.
AU  - Alesini, D.
AU  - Alexandrova, A.S.
AU  - Anania, M.P.
AU  - Andreev, N.E.
AU  - Andriyash, I.A.
AU  - Aschikhin, A.
AU  - Audet, T.
AU  - Aßmann, R.W.
AU  - Bacci, A.
AU  - Barna, I.F.
AU  - Beaton, A.
AU  - Beck, A.
AU  - Beluze, A.
AU  - Bernhard, A.
AU  - Bielawski, S.
AU  - Bisesto, F.G.
AU  - Brandi, F.
AU  - Brinkmann, R.
AU  - Bründermann, E.
AU  - Bussmann, M.H.
AU  - Bussolino, G.
AU  - Büscher, M.
AU  - Chancé, A.
AU  - Chen, M.
AU  - Chiadroni, E.
AU  - Cianchi, A.
AU  - Clarke, J.A.
AU  - Cole, J.
AU  - Couprie, M.-E.
AU  - Croia, M.
AU  - Cros, B.
AU  - Crump, P.A.
AU  - Dattoli, G.
AU  - De Nicola, S.
AU  - Del Dotto, A.
AU  - Delerue, N.
AU  - Dias, J.M.
AU  - Dorda, U.
AU  - Fedele, R.
AU  - Ferran Pousa, A.
AU  - Ferrario, M.
AU  - Filippi, F.
AU  - Fiore, G.
AU  - Fonseca, R.A.
AU  - Galimberti, M.
AU  - Gallo, A.
AU  - Ghaith, A.
AU  - Giove, D.
AU  - Giribono, A.
AU  - Gizzi, L.A.
AU  - Grüner, F.J.
AU  - Habib, A.F.
AU  - Haefner, C.
AU  - Heinemann, T.
AU  - Hidding, B.
AU  - Holzer, B.J.
AU  - Hooker, S.M.
AU  - Hosokai, T.
AU  - Huebner, M.
AU  - Irman, A.
AU  - Jafarinia, F.
AU  - Jaroszynski, D.A.
AU  - Joshi, C.
AU  - Kaluza, M.
AU  - Kando, M.
AU  - Karger, O.S.
AU  - Karsch, S.
AU  - Khazanov, E.
AU  - Khikhlukha, D.
AU  - Knetsch, A.
AU  - Kocon, D.
AU  - Koester, P.
AU  - Kononenko, O.S.
AU  - Korn, G.
AU  - Kostyukov, I.
AU  - Kruchinin, K.O.
AU  - Labate, L.
AU  - Le Blanc, C.
AU  - Lechner, C.
AU  - Leemans, W.
AU  - Lehrach, A.
AU  - Li, X.
AU  - Libov, V.
AU  - Lifschitz, A.
AU  - Litvinenko, V.
AU  - Lu, W.
AU  - Lundh, O.
AU  - Maier, A.R.
AU  - Malka, V.
AU  - Manahan, G.G.
AU  - Mangles, S.P.D.
AU  - Marchetti, B.
AU  - Martinez de la Ossa, A.
AU  - Martins, J.L.
AU  - Mason, P.D.
AU  - Massimo, F.
AU  - Mathieu, F.
AU  - Maynard, G.
AU  - Mazzotta, Z.
AU  - Molodozhentsev, A.Y.
AU  - Mostacci, A.
AU  - Murphy, C.D.
AU  - Müller, A.-S.
AU  - Najmudin, Z.
AU  - Nghiem, P.A.P.
AU  - Nguyen, F.
AU  - Niknejadi, P.
AU  - Osterhoff, J.
AU  - Oumbarek Espinos, D.
AU  - Papadopoulos, D.N.
AU  - Patrizi, B.
AU  - Pattathil, R.
AU  - Petrillo, V.
AU  - Pocsai, M.A.
AU  - Poder, K.
AU  - Pompili, R.
AU  - Pribyl, L.
AU  - Pugacheva, D.
AU  - Romeo, S.
AU  - Rossetti Conti, M.
AU  - Rossi, A.R.
AU  - Rossmanith, R.
AU  - Roussel, E.
AU  - Sahai, A.A.
AU  - Sarri, G.
AU  - Schaper, L.
AU  - Scherkl, P.
AU  - Schramm, U.
AU  - Schroeder, C.B.
AU  - Scifo, J.
AU  - Serafini, L.
AU  - Sheng, Z.M.
AU  - Siders, C.
AU  - Silva, L.O.
AU  - Silva, T.
AU  - Simon, C.
AU  - Sinha, U.
AU  - Specka, A.
AU  - Streeter, M.J.V.
AU  - Svystun, E.N.
AU  - Symes, D.
AU  - Szwaj, C.
AU  - Tauscher, G.E.
AU  - Terzani, D.
AU  - Thompson, N.
AU  - Toci, G.
AU  - Tomassini, P.
AU  - Torres, R.
AU  - Ullmann, D.
AU  - Vaccarezza, C.
AU  - Vannini, M.
AU  - Vieira, J.M.
AU  - Villa, F.
AU  - Wahlstrom, C.-G.
AU  - Walczak, R.
AU  - Walker, P.A.
AU  - Wang, K.
AU  - Welsch, C.P.
AU  - Wiggins, S.M.
AU  - Wolfenden, J.
AU  - Xia, G.X.
AU  - Yabashi, M.
AU  - Zhu, J.
AU  - Zigler, A.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Status of the Horizon 2020 EuPRAXIA Conceptual Design Study
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to FEL pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for HEP detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 3638
EP  - 3642
KW  - plasma
KW  - laser
KW  - electron
KW  - acceleration
KW  - site
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-THPGW026
UR  - http://jacow.org/ipac2019/papers/thpgw026.pdf
ER  - 

TY  - CONF
AU  - Bakkali Taheri, F.
AU  - Apollonio, M.
AU  - Bartolini, R.
AU  - Li, J.
AU  - Singh, B.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Genetic Optimisation of Beamline Design for DIAMOND
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - The problem of optimisation of beamline structures is studied, from the point of view of multi-objective genetic algorithms. While this approach has been successfully used in the exploration of potential particle accelerator lattices, it has never been applied to beamline design. In this paper, the Non-Dominated Sorting Genetic Algorithm II (NGSA II) is used to optimize a structure where photons are assumed to propagate through the optical elements according to the wavefront model as implemented in SRW. It is shown that appropriate objective functions can help to set up an interesting set of parameters, with competitive computational resources compared to the traditional approach. Examples illustrating this optimization method are shown in the context of DIAMOND.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 3753
EP  - 3756
KW  - synchrotron
KW  - framework
KW  - photon
KW  - radiation
KW  - experiment
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-THPGW071
UR  - http://jacow.org/ipac2019/papers/thpgw071.pdf
ER  -