TY - CONF AU - Caggiano, J.A. AU - Castronovo, D. AU - Fitsos, P. AU - Gibson, D.J. AU - Hall, J. AU - Johnson, M.S. AU - Marsh, R.A. AU - Rusnak, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of the Neutron Imaging Differential Pumping Line at LLNL J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The neutron imaging system at LLNL is a radiographic capability for imaging objects with fast, quasi-monoenergetic neutrons at ≤1mm spatial resolution. The neutron production source is a deuteron beam (4 or 7 MeV) incident upon a rotating, high-pressure, windowless, pure-deuterium gas target. The windowless nature of the target combined with the high pressure leads to significant gas leakage upstream of the neutron production target. This leakage degrades the imaging quality by (1) increasing the depth-of-field blurring and (2) increasing the beam diameter and divergence in the transverse direction via angular straggling in the residual gas. To mitigate these effects, and guided by bench tests and simulations, we designed a differential pumping line (DPL) to ensure the highest quality imaging system. The system consists of three primary stages (chambers), each separated by carefully shaped apertures. These apertures can be long and thin with low-angle tapers due to the high quality of the beam optics (convergence at the target < 5mrad) and low emittance of the beam (~5 pi mm-mrad). The primary cascaded roots pumps are sized to remove >99% of the incoming mass flow in each stage, ensuring that by the third stage furthest from the target, turbomolecular pumps are able to operate in a nominal ~mTorr range. We anticipate full system testing with helium in mid 2019. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1312 EP - 1314 KW - neutron KW - target KW - vacuum KW - shielding KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP033 UR - http://jacow.org/ipac2019/papers/tupmp033.pdf ER - TY - CONF AU - Marsh, R.A. AU - Anderson, S.G. AU - Gibson, D.J. AU - Hall, J. AU - Rusnak, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Lawrence Livermore National Laboratory is developing an intense, high-brightness fast neutron source to create sub-millimeter-scale resolution neutron radiographs and imag-es. An intense source (10¹¹ n/s/sr at 0 degrees) of fast neutrons (10 MeV) will be produced using a pulsed 7 MeV, 300μAmp average-current commercial deuteron accelerator producing a small (1.5 mm diameter) beam spot size to achieve high resolution. The high average power beam is a challenge for diagnostics, and a precise full power emittance measurement is critical to benchmark the system performance. A fluorescence-based beam profiling diagnostic has been selected, and this paper presents the design for the system including chamber layout, light yield calculations, and imaging system details. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2777 EP - 2779 KW - neutron KW - diagnostics KW - quadrupole KW - target KW - photon DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW120 UR - http://jacow.org/ipac2019/papers/wepgw120.pdf ER - TY - CONF AU - Weikum, M.K. AU - Akhter, T. AU - Alesini, D. AU - Alexandrova, A.S. AU - Anania, M.P. AU - Andreev, N.E. AU - Andriyash, I.A. AU - Aschikhin, A. AU - Audet, T. AU - Aßmann, R.W. AU - Bacci, A. AU - Barna, I.F. AU - Beaton, A. AU - Beck, A. AU - Beluze, A. AU - Bernhard, A. AU - Bielawski, S. AU - Bisesto, F.G. AU - Brandi, F. AU - Brinkmann, R. AU - Bründermann, E. AU - Bussmann, M.H. AU - Bussolino, G. AU - Büscher, M. AU - Chancé, A. AU - Chen, M. AU - Chiadroni, E. AU - Cianchi, A. AU - Clarke, J.A. AU - Cole, J. AU - Couprie, M.-E. AU - Croia, M. AU - Cros, B. AU - Crump, P.A. AU - Dattoli, G. AU - De Nicola, S. AU - Del Dotto, A. AU - Delerue, N. AU - Dias, J.M. AU - Dorda, U. AU - Fedele, R. AU - Ferran Pousa, A. AU - Ferrario, M. AU - Filippi, F. AU - Fiore, G. AU - Fonseca, R.A. AU - Galimberti, M. AU - Gallo, A. AU - Ghaith, A. AU - Giove, D. AU - Giribono, A. AU - Gizzi, L.A. AU - Grüner, F.J. AU - Habib, A.F. AU - Haefner, C. AU - Heinemann, T. AU - Hidding, B. AU - Holzer, B.J. AU - Hooker, S.M. AU - Hosokai, T. AU - Huebner, M. AU - Irman, A. AU - Jafarinia, F. AU - Jaroszynski, D.A. AU - Joshi, C. AU - Kaluza, M. AU - Kando, M. AU - Karger, O.S. AU - Karsch, S. AU - Khazanov, E. AU - Khikhlukha, D. AU - Knetsch, A. AU - Kocon, D. AU - Koester, P. AU - Kononenko, O.S. AU - Korn, G. AU - Kostyukov, I. AU - Kruchinin, K.O. AU - Labate, L. AU - Le Blanc, C. AU - Lechner, C. AU - Leemans, W. AU - Lehrach, A. AU - Li, X. AU - Libov, V. AU - Lifschitz, A. AU - Litvinenko, V. AU - Lu, W. AU - Lundh, O. AU - Maier, A.R. AU - Malka, V. AU - Manahan, G.G. AU - Mangles, S.P.D. AU - Marchetti, B. AU - Martinez de la Ossa, A. AU - Martins, J.L. AU - Mason, P.D. AU - Massimo, F. AU - Mathieu, F. AU - Maynard, G. AU - Mazzotta, Z. AU - Molodozhentsev, A.Y. AU - Mostacci, A. AU - Murphy, C.D. AU - Müller, A.-S. AU - Najmudin, Z. AU - Nghiem, P.A.P. AU - Nguyen, F. AU - Niknejadi, P. AU - Osterhoff, J. AU - Oumbarek Espinos, D. AU - Papadopoulos, D.N. AU - Patrizi, B. AU - Pattathil, R. AU - Petrillo, V. AU - Pocsai, M.A. AU - Poder, K. AU - Pompili, R. AU - Pribyl, L. AU - Pugacheva, D. AU - Romeo, S. AU - Rossetti Conti, M. AU - Rossi, A.R. AU - Rossmanith, R. AU - Roussel, E. AU - Sahai, A.A. AU - Sarri, G. AU - Schaper, L. AU - Scherkl, P. AU - Schramm, U. AU - Schroeder, C.B. AU - Scifo, J. AU - Serafini, L. AU - Sheng, Z.M. AU - Siders, C. AU - Silva, L.O. AU - Silva, T. AU - Simon, C. AU - Sinha, U. AU - Specka, A. AU - Streeter, M.J.V. AU - Svystun, E.N. AU - Symes, D. AU - Szwaj, C. AU - Tauscher, G.E. AU - Terzani, D. AU - Thompson, N. AU - Toci, G. AU - Tomassini, P. AU - Torres, R. AU - Ullmann, D. AU - Vaccarezza, C. AU - Vannini, M. AU - Vieira, J.M. AU - Villa, F. AU - Wahlstrom, C.-G. AU - Walczak, R. AU - Walker, P.A. AU - Wang, K. AU - Welsch, C.P. AU - Wiggins, S.M. AU - Wolfenden, J. AU - Xia, G.X. AU - Yabashi, M. AU - Zhu, J. AU - Zigler, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Status of the Horizon 2020 EuPRAXIA Conceptual Design Study J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Horizon 2020 Project EuPRAXIA (European Plasma Research Accelerator with eXcellence In Applications) is producing a conceptual design report for a highly compact and cost-effective European facility with multi-GeV electron beams accelerated using plasmas. EuPRAXIA will be set up as a distributed Open Innovation platform with two construction sites, one with a focus on beam-driven plasma acceleration (PWFA) and another site with a focus on laser-driven plasma acceleration (LWFA). User areas at both sites will provide access to FEL pilot experiments, positron generation and acceleration, compact radiation sources, and test beams for HEP detector development. Support centres in four different countries will complement the pan-European implementation of this infrastructure. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3638 EP - 3642 KW - plasma KW - laser KW - electron KW - acceleration KW - site DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPGW026 UR - http://jacow.org/ipac2019/papers/thpgw026.pdf ER -