TY  - CONF
AU  - Abbaslou, M.
AU  - Dastan, S.
AU  - Rahighi, J.
AU  - Saeidi, F.
AU  - Sedaghatizadeh, M.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - The Iranian Light Source Facility (ILSF) is a 3 GeV 3rd synchrotron radiation laboratory in the basic design phase. The Storage Ring (SR) is based on a five-bend achromat (5BA) lattice providing low horizontal emittance of 0.27 nm.rad. Due to the ILSF storage ring, straight section limits the use of the short length wigglers for hard X-ray generation is recommended. Which are removable in the lattice. In this article, the new design of the 3-pole wiggler is investigated and the main parameters of this 3-pole wiggler, by considering the ILSF storage ring characteristics, is modified. Also, the effect of the new 3-pole wiggler on the beam dynamics is investigated and the advantages of the new design are presented.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 1557
EP  - 1560
KW  - dipole
KW  - radiation
KW  - lattice
KW  - storage-ring
KW  - wiggler
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-TUPGW068
UR  - http://jacow.org/ipac2019/papers/tupgw068.pdf
ER  - 

TY  - CONF
AU  - Dehghan, M.
AU  - Abbasi, F.
AU  - Azizi, H.
AU  - Ghasemi, F.
AU  - Taghibi Khotbeh-Sara, A.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Basic Design of the RF Power System for IRANCYC-10 Accelerator
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - In this paper the basic design of an RF system to produce the required power of IRANCYC-10 cyclotron accelerator is reported. The designed system can generate 15 kW power at the operating frequency of 71 MHz CW. The authors provide a step-by-step ex-planation of the process of the design. It is carried out in three sections; (1) RF design features of the acceler-ator is investigated and power value is calculated in accordance with the requirements of the cyclotron, (2) the choice of solid state amplifiers as the RF power source is presented with its available power and struc-ture, (3) design of insertion instruments is reported to transfer and combine the RF power. The purpose of the paper is to achieve the best performance of the RF system, as well as decreasing overall size by using modular devices.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 1972
EP  - 1974
KW  - cyclotron
KW  - simulation
KW  - ISOL
KW  - vacuum
KW  - operation
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-TUPTS021
UR  - http://jacow.org/ipac2019/papers/tupts021.pdf
ER  - 

TY  - CONF
AU  - Taghibi Khotbeh-Sara, A.
AU  - Ghasemi, F.
AU  - Khalafi, H.
AU  - Mohseni Kejani, M.
AU  - Rahmani, F.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - Feasibility Study on Mo-99 Production Using Hybrid Method Based on High Power Electron Accelerator
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - In this study, the idea 99Mo production using hybrid method based on electron accelerator has been pre-sented. Two different main production channels of 100Mo(γ,n)99Mo and 98Mo(n,γ)99Mo can be used for 99Mo production in this system. By considering high power Linac (30 MeV, 1 mA in average beam current) and one-stage approach, the calculation of 100Mo(γ,n)99Mo reactions in the optimized 100Mo target in two different designs (strip and disc) has been simu-lated. It is predicted that about 61 and 53 Ci of 99Mo activity per 24-hour irradiation on the strip target and the disc plates can be achieved, respectively. The threshold energy of photoneutron at 100Mo is about 9 MeV, so a large part of bremsstrahlung photons cannot participate in photoneutron reaction. For feasibility study, new hybrid approach has been tested by 10 MeV Rhodotron. Due to the low threshold of photo-neutron in deuteron (about 2.2 MeV) and significant low energy photons in 100Mo, photoneutron flux is available. So, Molybdenum target in heavy water Tank increases the production yield of 99Mo using neutron absorption reaction in 98Mo. The total activity of 99Mo has been predicted about 0.23 Ci per 24 hours e-beam irradiation.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 3462
EP  - 3465
KW  - target
KW  - neutron
KW  - radiation
KW  - electron
KW  - photon
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-THPMP008
UR  - http://jacow.org/ipac2019/papers/thpmp008.pdf
ER  -