TY - CONF AU - Foroughi, F. AU - Ahmadi, E. AU - Dastan, S. AU - Jazayeri, S.M. AU - Rahighi, J. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - BEAM DYNAMICS OF HIGH CHROMATICITY LATTICE FOR IRANIAN LIGHT SOURCE FACILITY (ILSF) STORAGE RING J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - One of the limiting factors of electron beam lifetime in low emittance storage rings is Head-Tail (HT) insta-bility. Low emittance storage rings typically have a large negative natural chromaticity due to the strong quadru-poles. Above transition large negative natural chroma-ticity leads to large Head-Tail instability which limit the beam lifetime. Since the threshold current of HT insta-bility is directly related to linear chromaticity, increasing the linear chromaticity to slightly positive value is a solution to prevent HT instability. In this paper we in-creased the chromaticity of Iranian Light Source Facility (ILSF) to (+4, +4) and we will investigate the beam dy-namics of ILSF 3GeV storage ring in high chromaticity. For reaching this aim we have used two families of sex-tupoles for chromaticity correction and then optimized them to maximize the dynamic aperture and Touschek lifetime. The beam dynamics of high chromaticity lattice is presented in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 943 EP - 945 KW - storage-ring KW - lattice KW - dynamic-aperture KW - resonance KW - optics DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS038 UR - http://jacow.org/ipac2019/papers/mopts038.pdf ER - TY - CONF AU - Mash'al, A.M. AU - Ahmadi, E. AU - Dabbagh Kashani, F.D. AU - Dastan, S. AU - Rahighi, J. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Beta Beating and Coupling Correction of the ILSF Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Iranian Light Source Facility (ILSF) is a 3 GeV synchrotron radiation facility, which is in the design stage. Inevitable errors like imperfection of magnetic field and misalignment of magnets will introduce various destructive effects on the performance of the machine. The possibility of correcting the errors should be thoroughly examined before settling the design. In this paper, the correction process of beta beating and coupling with LOCO is described. The rms beta beating in horizontal and vertical planes after correction are reduced to 1% and 2% respectively. The average coupling ratio of lattice for 100 random error distribution is corrected to 0.2%. PB - JACoW Publishing CP - Geneva, Switzerland SP - 946 EP - 948 KW - coupling KW - lattice KW - quadrupole KW - closed-orbit KW - alignment DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS040 UR - http://jacow.org/ipac2019/papers/mopts040.pdf ER - TY - CONF AU - Abbaslou, M. AU - Dastan, S. AU - Rahighi, J. AU - Saeidi, F. AU - Sedaghatizadeh, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Iranian Light Source Facility (ILSF) is a 3 GeV 3rd synchrotron radiation laboratory in the basic design phase. The Storage Ring (SR) is based on a five-bend achromat (5BA) lattice providing low horizontal emittance of 0.27 nm.rad. Due to the ILSF storage ring, straight section limits the use of the short length wigglers for hard X-ray generation is recommended. Which are removable in the lattice. In this article, the new design of the 3-pole wiggler is investigated and the main parameters of this 3-pole wiggler, by considering the ILSF storage ring characteristics, is modified. Also, the effect of the new 3-pole wiggler on the beam dynamics is investigated and the advantages of the new design are presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1557 EP - 1560 KW - dipole KW - radiation KW - lattice KW - storage-ring KW - wiggler DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW068 UR - http://jacow.org/ipac2019/papers/tupgw068.pdf ER - TY - CONF AU - Hadad, M. AU - Dastan, S. AU - Rahighi, J. AU - Razazian, M. AU - Saeidi, F. AU - Yousefnejad, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Insertion Devices for the Day-One Beamlines of ILSF J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Iranian Light Source Facility (ILSF) is a new 3 GeV synchrotron radiation laboratory with ultralow emittance of 270 pm-rad, which is in the design stage. Seven beamlines are planned to start operation with several different insertion devices installed in the storage ring either from "day one" or within the first year of operation. The most operational undulator for polarized radiations -Apple II- has been deliberated for the solid state electron spectroscopy, the Spectromicroscopy and the ARPES beamlines. The hybrid wigglers for the XPD and the EXAFS beamlines and in-vacuum undulators for Macromolecular Crystallography and SCD beamlines have been chosen too. The emission of these IDs covers a wide spectral range extending from hard X-rays to UV. Pre-design of the IDs were already done in ILSF. The main parameters of magnetic design as well as radiation parameters for the first phase of ILSF insertion devices have been described in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1561 EP - 1563 KW - undulator KW - vacuum KW - wiggler KW - storage-ring KW - polarization DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW069 UR - http://jacow.org/ipac2019/papers/tupgw069.pdf ER - TY - CONF AU - Dehghan, M. AU - Abbasi, F. AU - Azizi, H. AU - Ghasemi, F. AU - Taghibi Khotbeh-Sara, A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Basic Design of the RF Power System for IRANCYC-10 Accelerator J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In this paper the basic design of an RF system to produce the required power of IRANCYC-10 cyclotron accelerator is reported. The designed system can generate 15 kW power at the operating frequency of 71 MHz CW. The authors provide a step-by-step ex-planation of the process of the design. It is carried out in three sections; (1) RF design features of the acceler-ator is investigated and power value is calculated in accordance with the requirements of the cyclotron, (2) the choice of solid state amplifiers as the RF power source is presented with its available power and struc-ture, (3) design of insertion instruments is reported to transfer and combine the RF power. The purpose of the paper is to achieve the best performance of the RF system, as well as decreasing overall size by using modular devices. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1972 EP - 1974 KW - cyclotron KW - simulation KW - ISOL KW - vacuum KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPTS021 UR - http://jacow.org/ipac2019/papers/tupts021.pdf ER - TY - CONF AU - Dastan, S. AU - Livinov, S. AU - Rahighi, J. AU - Saffari, R. AU - Steck, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The ESR Closed Orbit Calculation and Simulation J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The commissioning of the ESR with a new control system based on the LSA (LHC System Architecture) has started recently. This new control system is under development and considers all aspects of the expected functionality to operate the GSI/FAIR accelerators and incorporates the present GSI controls infrastructure*. Two years ago, the old control system which was based on outdated computers and operating system, was discontinued. So, both the heavy ion synchrotron SIS-18 and the Experimental Storage Ring (ESR) operation from now on have to be performed with the new FAIR control system. In order to introduce an improved model to the control system change, new calculations and simulations for SIS and ESR are necessary. In this paper we summarize the results of closed orbit calculations for the ESR which are done with three different codes, namely: ELEGANT*, MAD-X and MIRKO. Also, because the results of ELEGANT and MAD-X in this issue are similar to each other, we present ELEGANT results in the report. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3349 EP - 3351 KW - controls KW - simulation KW - electron KW - experiment KW - MMI DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPTS100 UR - http://jacow.org/ipac2019/papers/wepts100.pdf ER - TY - CONF AU - Khosravi, N. AU - Ahmadi, E. AU - Akhyani, M. AU - Dastan, S. AU - Karimi, H. AU - Mash'al, A.M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A General Comparison on Impedance Theory and CST Simulation of Discontinuities J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Inhomogeneity of vacuum chamber components is the main source of coupling impedance. Nowadays, wake potential is mostly predictable by 3D codes. Analytical prediction of impedance theories can be helpful as a side solution. On the other hand, some asymmetries in the geometry of components might make troubles and lead to imprecise numerical results in 3D simulations. Analytical approximation of discontinuities, holes, and grooves can give us an estimation of expected results and can be used as a benchmark in the case that we do not have any experimental data. To clarify the validity of theoretical expressions, general discontinuities are simulated in CST. The comparison of final results is presented here. At last, resistive wall impedance and some general discontinuities of components at ILSF storage ring are compared from the theoretical and simulation point of view. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3352 EP - 3355 KW - impedance KW - simulation KW - vacuum KW - coupling KW - storage-ring DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPTS101 UR - http://jacow.org/ipac2019/papers/wepts101.pdf ER - TY - CONF AU - Saeidi, F. AU - Dastan, S. AU - Rahighi, J. AU - Razazian, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - ILSF Ultralow Emittance Storage Ring Magnets J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Iranian Light Source Facility (ILSF) is a 3 GeV synchro-tron which is in the basic design phase. The ILSF storage ring (SR) is based on a Five-Bend Achromat lattice providing a low horizontal beam emittance of 270 pm-rad. The ILSF storage ring consists of 100 combined di-pole magnets of 2 types, 240 quadrupoles in 5 families and also 320 sextupoles in 6 families. In this paper, we present some design features of the SR magnets and dis-cuss the detailed physical design of these electromagnets including electrical and cooling calculations. Using POISSON and OPERA codes [1,2], pole and yoke geome-try was developed for each magnet PB - JACoW Publishing CP - Geneva, Switzerland SP - 4142 EP - 4144 KW - dipole KW - quadrupole KW - sextupole KW - storage-ring KW - multipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS017 UR - http://jacow.org/ipac2019/papers/thpts017.pdf ER - TY - CONF AU - Saeidi, F. AU - Dastan, S. AU - Fatehi, S. AU - Rahighi, J. AU - Razazian, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - ILSF Booster Magnets for the New Low Emittance Lattice J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Iranian light source facility is a new 3rd generation light source with a booster which is supposed to work at 150 keV injection energy and guide the electrons to a 3GeV ring. It consists of 50 combined dipole magnets in one type, 50 quadrupoles and 15 sextupoles in one family. Using POISSON and OPERA3D codes[1,2], pole and yoke geometry was designed for each magnet and also cooling and electrical calculations have been done. ILSF has attempted to mechanical design and build prototype magnets which are ongoing at this stage too. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4145 EP - 4147 KW - booster KW - sextupole KW - dipole KW - quadrupole KW - multipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS018 UR - http://jacow.org/ipac2019/papers/thpts018.pdf ER - TY - CONF AU - Messbah, N. AU - Abbasi Davani, F. AU - Ahmadiannamin, S. AU - Shaker, H. AU - Shirshekan, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of Beam Position Monitoring System for IPM Low Energy Electron LINAC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A beam position monitor (BPM) is a common device used in particle accelerators to measure the position of a beam of charged-particles. The goal of this project is to simulate and build prototype of different parts to be used for IPM low energy electron Linac being developed at Institute for Research in Fundamental Sciences. The IPM low energy electron Linac will initially be operated at a 7𝜇sec pulse duration and 250 Hz repetition rate with 2.998 GHz bunching frequency. A 4.5-MeV electron beam will be available in the second phase of commissioning. The device is composed of two pickup S-band cavities and a detection circuit to read out the electron beam’s position. The electrode pickup sensors will sense the mode strength generated by the passing beam of electrons. The working modes are TM110 (dipole) for the so called position cavity and TM010 (monopole) for the reference cavity. When the beam crosses the two cavity gaps it induces signals proportional to the product of charge and position offset in the position cavity, and to the charge only in the reference cavity. the position cavity has four rectangular waveguides that couple to the dipole mode while rejecting the monopole mode that would otherwise limit the resolution of the electronics. This signal will be input to a detection circuit that will be used to calculate the signals detected by four antennas arranged. A 180 degree hybrid at the first stage reduce the monopole and a heterodyne receiver principle was used to down-convert the signal frequency in about MHz IF frequency. These signals can then be used to determine the beam’s displacement from the center. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4394 EP - 4396 KW - cavity KW - electron KW - simulation KW - software KW - linac DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS019 UR - http://jacow.org/ipac2019/papers/thpts019.pdf ER -