TY - CONF AU - Fu, S. AU - Wang, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Operation Status and Upgrade of CSNS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - China Spallation Neutron Source (CSNS) accelerator complex consists of a front end, an 80MeV DTL linac, and a 1.6GeV Rapid Cycling Synchrotron (RCS).It is designed with a beam power of 100kW in the first phase and reserves upgrade capability to 500kW in the second phase. It has completed initial beam commissioning and has started user operation in 2018. And meanwhile the beam power is quickly going up from the initially above 10kW to 50kW during the user operation, and we can foresee that the designed beam power of 100 kW can be reached in the next year. This talk gives the most recent status of beam power ramping in CSNS, as well as future upgrade plan to increase the beam power up to 500 kW. PB - JACoW Publishing CP - Geneva, Switzerland SP - 23 EP - 27 KW - linac KW - MMI KW - cavity KW - rfq KW - DTL DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOZPLM1 UR - http://jacow.org/ipac2019/papers/mozplm1.pdf ER - TY - CONF AU - Chen, Y.K. AU - Jing, H.T. AU - Meng, C. AU - Song, Y.P. AU - Tang, J.Y. AU - Zhao, G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Proton Beam Steering for the Experimental Muon Source at CSNS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Experimental Muon Source (EMuS) is a muon source to be built at China Spallation Neutron Source (CSNS). The EMuS baseline design adopts a stand-alone target sitting in capture superconducting solenoids, and the muon beam is extracted in the forward direction. In the same time the spent protons are also extracted from the target station and guided to an external. Because there is an angle of 15 degrees between the axis of solenoids and the proton direction, the protons will be deviated by the solenoid field. A pair of correction magnets in front of the solenoids is used to align the incoming proton beam to the target and also guide the spent protons to the beam dump. As the target station is design to work at different field level, this increases the complexity of the proton beam transport. PB - JACoW Publishing CP - Geneva, Switzerland SP - 193 EP - 195 KW - proton KW - solenoid KW - target KW - extraction KW - neutron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW046 UR - http://jacow.org/ipac2019/papers/mopgw046.pdf ER - TY - CONF AU - Wu, J. AU - Qin, Q. AU - Zhang, Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Diffusion Map Analysis in High Energy Storage Ring Based e⁺/e⁻ Collider J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In a very high energy e⁺/e⁻ storage ring collider, e.g. Circular Electron Positron Collider (CEPC), the dynamic aperture is limited by the strong synchrotron radiation especially in the vertical direction. Some tracking results also shows that the beam lifetime does not correspond well to the dynamic aperture. Here we develop a method called diffusion map analysis, aiming to describe the beam distribution diffusion in transverse amplitude space by tracking less turns. The diffusion may come from quantum fluctuation of SR, beamstrahlung effect and nonlinearity. Comparing cases with different configuration of sextupoles, the diffusion map analysis presents good consistency with beam lifetime that needs much more turns of tracking. Constraints based on the diffusion map is applied to our dynamic aperture optimization, which could help us achieve enough long beam lifetime. PB - JACoW Publishing CP - Geneva, Switzerland SP - 203 EP - 205 KW - dynamic-aperture KW - radiation KW - synchrotron-radiation KW - collider KW - synchrotron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW051 UR - http://jacow.org/ipac2019/papers/mopgw051.pdf ER - TY - CONF AU - Xu, H.S. AU - Peng, Y.M. AU - Wang, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Study of Single-Bunch Instabilities in the Ramping Process in the HEPS Booster J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The booster of High Energy Photon Source (HEPS) is proposed to ramp the beam energy from 500 MeV to 6 GeV, and to deliver the required charge to the storage ring. However, the transverse single-bunch instability may limit the reachable bunch charge in the booster. The study of the transverse single-bunch instability has been carried out for the HEPS booster at both 500 MeV and 6 GeV to double check whether the required single-bunch charge can be achieved. Furthermore, the energy ramping process was recently included in the study. We concentrate in the analyses of the simulation results with the consideration of energy ramping process in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 206 EP - 209 KW - booster KW - impedance KW - simulation KW - lattice KW - injection DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW052 UR - http://jacow.org/ipac2019/papers/mopgw052.pdf ER - TY - CONF AU - Tian, S.K. AU - Xu, H.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Residual Gas Lifetime In High Energy Photon Source (HEPS) J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - High vacuum has always been mandatory in particle accelerators. This is especially true for circular machines, where the beam makes thousands or millions turns, and beam lifetime is heavily affected by the residual gas scattering. At the beginning of storage ring operation the lifetime was very short mostly dominated by residual gas scattering. The residual gas lifetime is comprised of the elastic and inelastic scattering on electrons and elastic and inelastic scattering on nuclei. One usually calculates only the elastic scattering on nuclei (single Coulomb scattering) and inelastic scattering on nuclei (bremsstrahlung) of the residual gas scattering lifetime component. The analytic calculation the residual gas scattering lifetime and simulations of the beam interaction with the residual gas with code will be shown in this presentation PB - JACoW Publishing CP - Geneva, Switzerland SP - 210 EP - 212 KW - scattering KW - electron KW - dynamic-aperture KW - vacuum KW - photon DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW053 UR - http://jacow.org/ipac2019/papers/mopgw053.pdf ER - TY - CONF AU - Zhang, Y. AU - Lin, C.T. AU - Wang, N. AU - Yu, C.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Crosstalk of Beam-Beam Effect and Longitudinal Impedance at CEPC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In conventional e⁺e⁻ storage ring colliders, we only use lengthend bunch length in beam-beam simulation instead of considering impedance directly. It is no problem since the longitudinal dynamics is not sensitive to beam-beam interaction. But it is different since the bunch will also be lengthend during beam-beam interaction by beamstrahlung effect. It is very natural and more self-consistent to consider the longitudinal impedance in the beam-beam simulation. The simulation shows that the working point region of stable collision is slightly shifted by the longitudinal impedance. It is found that the vertical coherent oscillation may decreases the beam-beam limit with impedance at some working point. PB - JACoW Publishing CP - Geneva, Switzerland SP - 247 EP - 249 KW - impedance KW - simulation KW - luminosity KW - collider KW - factory DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW068 UR - http://jacow.org/ipac2019/papers/mopgw068.pdf ER - TY - CONF AU - Duan, Z. AU - Gao, J. AU - Li, X.P. AU - Wang, D. AU - Wang, Y. AU - Xia, W.H. AU - Xu, Q.J. AU - Yu, C.H. AU - Zhang, Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Concepts of Longitudinally Polarized Electron and Positron Colliding Beams in the Circular Electron Positron Collider J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - This paper reports some preliminary study into the imple- mentation of longitudinally polarized e⁺/e⁻ colliding beams in the Circular Electron Positron Collider, at a center of mass energy of 91 GeV as a Z factory and energies beyond. PB - JACoW Publishing CP - Geneva, Switzerland SP - 445 EP - 448 KW - polarization KW - positron KW - resonance KW - electron KW - wiggler DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPMP012 UR - http://jacow.org/ipac2019/papers/mopmp012.pdf ER - TY - CONF AU - Bai, S. AU - Gao, J. AU - Geng, H. AU - Wang, D. AU - Wang, Y. AU - Yu, C.H. AU - Zhang, Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Beam-Gas and Beam-Thermal Photon Scattering in CEPC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Circular Electron Positron Collider (CEPC) is a proposed Higgs factory with center of mass energy of 240 GeV to measure the properties of Higgs boson and test the standard model accurately. Beam loss background in detectors is an important topic at CEPC. Beam-Gas scattering (BG) and Beam-Thermal photon scattering (BTH), although not so serious as Radiative Bhabha scattering (RBB) and Beamstrahlung (BS), are also important components of the beam induced backgrounds at CEPC due to the beam lifetime. In this paper, we evaluated the beam-gas and beam-thermal photon scattering in simulation and designed collimators to suppress the radiation level on the machine and the detector. PB - JACoW Publishing CP - Geneva, Switzerland SP - 626 EP - 629 KW - scattering KW - photon KW - background KW - detector KW - factory DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB024 UR - http://jacow.org/ipac2019/papers/moprb024.pdf ER - TY - CONF AU - Bao, Y. AU - Li, X. AU - Li, Y. AU - Song, Y.P. AU - Tong, X. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - High-Quality Muon Beam Production Based on Superconducting Solenoids J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In labs, muon beams are produced by protons hitting targets. The initial phase space of the muon beam is extremely large. In general, two types of muon collection methods have been used in the world. One is to put the muon production target in a superconducting solenoid, and low-energy muons are collected from the back of the target, then transported through a bent solenoid. In this way, a high-intensity muon beam can be collected, but the energy spread is wide and the beam polarization is low. For most muSR applications a surface muon beam with narrow energy bite and high polarization is required. Most muSR facilities are built with collecting magnets by the side of the target, in this way only a small fraction of muons with low emittance are collected and transported downstream. In this work we outline a muon collection method based on superconducting solenoid. Instead of using bent solenoids, a matching section with a dipole magnet is used to select muons with a certain momentum and match to downstream beamliines. A high-quality muon beam can be achieved with a high intensity and polarization. Such a method can be adapted to the MUSIC, Mu2e, and COMET muon beamlines after their dedicate experiments and convert the beamlines into a high quality muSR facility. PB - JACoW Publishing CP - Geneva, Switzerland SP - 630 EP - 632 KW - target KW - proton KW - polarization KW - experiment KW - solenoid DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB026 UR - http://jacow.org/ipac2019/papers/moprb026.pdf ER - TY - CONF AU - He, P. AU - Cao, J.S. AU - Chen, F.S. AU - Chen, J. AU - Dong, H. AU - He, D.Y. AU - Jiao, Y. AU - Kang, W. AU - Li, C.H. AU - Li, J.Y. AU - Long, F. AU - Lu, H.H. AU - Qi, X. AU - Qin, Q. AU - Qu, H. AU - Wang, J.Q. AU - Xu, G. AU - Yue, J.H. AU - Zhang, J. AU - Zhang, J.R. AU - Zhang, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Progress of HEPS Accelerator System Design J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The 4th generation ring-based light sources, HEPS (High Energy Photon Source) 7BA lattice has been de-veloped at IHEP. This is 6Gev, 200mA machine which has horizontal emittance Ɛh around 60pm.rad to gain the high brilliance photon beam. this compact lattice design bring so many engineering challenges for accelerator magnets, vacuum components, beam diagnotice, etc. This paper will present the noval lattice design and subsystem design progress. PB - JACoW Publishing CP - Geneva, Switzerland SP - 633 EP - 635 KW - storage-ring KW - cavity KW - booster KW - vacuum KW - lattice DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB027 UR - http://jacow.org/ipac2019/papers/moprb027.pdf ER - TY - CONF AU - Li, M.T. AU - An, Y.W. AU - Li, F. AU - Xu, S.Y. AU - Xu, T.G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Application of WCM in Beam Commissioning of RCS in CSNS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Wall Current Monitor (WCM) is the only beam instru-ment in RCS of CSNS. It is utilized to derive many kinds of physics parameters during beam commissioning. The longitudinal phase distribution of the bunch over the boosting time is deduced for our future analyzation. PB - JACoW Publishing CP - Geneva, Switzerland SP - 636 EP - 638 KW - proton KW - neutron KW - bunching KW - MMI KW - target DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB028 UR - http://jacow.org/ipac2019/papers/moprb028.pdf ER - TY - CONF AU - Li, M.T. AU - An, Y.W. AU - Xu, S.Y. AU - Xu, T.G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - It is proved that in the beam commissioning of the RCS of CSNS, the longitudinal optimization is vital for the promotion of the beam power. The WCM is the only beam instrument for the measurement of the longitudinal parameters. It is important for us to deduce the longitudi-nal phase space distribution, using the WCM data. The longitudinal tomography is applied, and some satisfying results have been obtained. PB - JACoW Publishing CP - Geneva, Switzerland SP - 639 EP - 642 KW - MMI KW - neutron KW - synchrotron KW - FEL KW - proton DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB029 UR - http://jacow.org/ipac2019/papers/moprb029.pdf ER - TY - CONF AU - Plostinar, D.C. AU - Eshraqi, M. AU - Gålnander, B. AU - Lebedev, V.A. AU - Prior, C.R. AU - Sato, Y. AU - Tang, J.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Future High Power Proton Drivers for Neutrino Beams J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Over the last two decades, significant efforts were made through several international studies to identify and develop technical solutions for potential Neutrino Factories and Superbeam Facilities. With many questions now settled, as well as clearer R&D needs, various proposals are being made for future facilities in China, Europe, Japan and North America. These include both developing and adapting existing machines as well as green-field solutions. In this paper, we review all the major accelerator programmes aimed at delivering high-power proton beams for neutrino physics. PB - JACoW Publishing CP - Geneva, Switzerland SP - 662 EP - 665 KW - linac KW - proton KW - operation KW - neutron KW - factory DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPRB045 UR - http://jacow.org/ipac2019/papers/moprb045.pdf ER - TY - CONF AU - Wang, Y. AU - Dai, J.P. AU - Fan, M.X. AU - Li, A.H. AU - Li, B. AU - Liu, H.C. AU - Qu, P.H. AU - Sha, P. AU - Wu, X.L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Optimization of SC Cavity Type for CSNS Linac Upgrade J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In order to increase CSNS beam power from 100kW to 500kW, the Linac injection energy need to be increased from 80MeV to 300MeV. The combined layout of superconducting spoke cavities and elliptical cavities will be adopted to accelerate H⁻ beam to 300MeV. Two operation frequency of spoke cavities were compared with single and double spoke structure, a compact 648MHz βg=0.4 single spoke cavity was proposed, and the RF performance was presented, as well as the MP behavior. PB - JACoW Publishing CP - Geneva, Switzerland SP - 987 EP - 989 KW - cavity KW - linac KW - operation KW - neutron KW - acceleration DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS056 UR - http://jacow.org/ipac2019/papers/mopts056.pdf ER - TY - CONF AU - Meng, C. AU - Gao, J. AU - Li, X.P. AU - Pei, G. AU - Zhang, J.R. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Alternative Design of CEPC LINAC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Circular Electron-Positron Collider (CEPC) is a 100 km ring e⁺ e⁻ collider for a Higgs factory. The injector is composed of a Linac and a Booster. The baseline design of CEPC Linac is a normal conducting S-band linear accelerator with frequency in 2860 MHz, which can provide electron and positron beam at an energy up to 10 GeV and bunch charge up to 3 nC. To reduce the design difficulty of booster and booster magnet at low energy part, an alternative design of the Linac with C-band accelerating structure at high energy part is proposed and the energy is up to 20 GeV. The compre-hensive consideration of Linac design and damping ring design will be discussed. In this paper, the physics design of this scheme is presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1005 EP - 1007 KW - linac KW - positron KW - electron KW - booster KW - collider DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS065 UR - http://jacow.org/ipac2019/papers/mopts065.pdf ER - TY - CONF AU - Meng, C. AU - He, D.Y. AU - He, X. AU - Li, J.Y. AU - Peng, Y.M. AU - Wang, S.C. AU - Xiao, O. AU - Zhang, J.R. AU - Zhang, S.P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Progress in Physics Design of HEPS LINAC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The High Energy Photon Source (HEPS) is a 6-GeV, ultralow-emittance light source to be built in China. The injector is composed of a 500-MeV Linac and a full energy booster. According to the study and com-missioning consideration of on-axis swap-out injec-tion system, a high bunch charge injector is desirable and a Linac that can provide 7nC per bunch electron beam to booster is needed. This paper present different bunching system schemes and the performance of different schemes are discussed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1008 EP - 1011 KW - linac KW - wakefield KW - bunching KW - electron KW - emittance DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS067 UR - http://jacow.org/ipac2019/papers/mopts067.pdf ER - TY - CONF AU - Yang, L. AU - He, T. AU - He, Y. AU - Li, A.H. AU - Lu, L. AU - Xing, C.C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - RF DESIGN OF AN 81.25 MHz BENT-VANE TYPE RFQ J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The bent-vane type RFQ is proposed at IMP, Chinese Academy of Sciences, which can downsize cross section and has the simple cooling system in low frequency field. The vanes of the four-vane type RFQ are bent to form the new RFQ structure. In order to research its RF properties, the prototype cavity of an 81.25 MHZ bent-vane type RFQ is designed. This paper presents the preliminary RF design of the prototype cavity. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1015 EP - 1017 KW - rfq KW - cavity KW - linac KW - ECR KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS072 UR - http://jacow.org/ipac2019/papers/mopts072.pdf ER - TY - CONF AU - Zhang, S.P. AU - Li, J.Y. AU - Meng, C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Bunching System Optimization Based on MOGA J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Multiobjective Genetic Algorithms (MOGA) is effective in dealing with optimization problems with multiple objectives. The bunching system of the High Energy Photon Source (HEPS) linac adopts a traditional bunching system for compressing electron beams with a pulse charge of 4 nC. The bunching system is optimized using MOGA. The optimization include minimizing the normalized emittance and maximizing transmission efficiency. The optimization results have reached the design target, and are presented in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1018 EP - 1020 KW - bunching KW - linac KW - emittance KW - electron KW - solenoid DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS073 UR - http://jacow.org/ipac2019/papers/mopts073.pdf ER - TY - CONF AU - Jiao, Y. AU - Cui, X. AU - Duan, Z. AU - Guo, Y.Y. AU - He, P. AU - Huang, X.Y. AU - Ji, D. AU - Ji, H.F. AU - Li, C. AU - Li, J.Y. AU - Li, X.Y. AU - Meng, C. AU - Peng, Y.M. AU - Qin, Q. AU - Tian, S.K. AU - Wang, J.Q. AU - Wang, N. AU - Wei, Y. AU - Xu, G. AU - Xu, H.S. AU - Yan, F. AU - Yu, C.H. AU - Zhao, Y.L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Beam Dynamics Study in the HEPS Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The High Energy Photon Source (HEPS) is the first high-energy diffraction-limited storage ring (DLSR) light source to be built in China, with a natural emittance of a few tens of pm rad and a circumference of 1360.4 m. After 10 years’ evolution, the accelerator physics design of the HEPS has been basically determined, with the ring consisting of 48 hybrid-7BAs with anti-bends and super-bends. This paper will discuss the accelerator physics studies of the HEPS storage ring, covering issues of lattice design, nonlinear optimization, collective effects, error correction, insertion devices, etc. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1203 EP - 1207 KW - lattice KW - storage-ring KW - emittance KW - photon KW - brightness DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUZPLS2 UR - http://jacow.org/ipac2019/papers/tuzpls2.pdf ER - TY - CONF AU - Han, C. AU - Gao, Y. AU - Guo, X.L. AU - Liu, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Research on the Calibration of Direct-Current Current Transformers J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The measurement accuracy of direct current-current transformer (DCCT) is one of the key factors influencing the output of high-precision direct current power supply. In this paper, a calibration system designed by measuring resistance principle with a high accuracy direct current comparator (DCC) was presented for DCCT whose measurement accuracy is better than 10⁻⁵. The system can achieve high-precision calibration of DCCT within the measurement range of 0-400 A, and the uncertainty of the system calibration is better than 1.1×10-6 in the whole range. The accuracy and linearity of DCCT are tested to verify the accuracy of the whole calibration system, thereby the current accuracy of the magnet power supply can be further improved. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1280 EP - 1282 KW - power-supply KW - experiment KW - collider KW - factory KW - data-acquisition DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP020 UR - http://jacow.org/ipac2019/papers/tupmp020.pdf ER - TY - CONF AU - Li, J. AU - Liu, Y. AU - Qi, X. AU - Zhang, W.Q. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - With the development of accelerators, Accelerator physics require power supply output high voltage and current (Peak power reached MWs). And the current stability requirements better than 10ppm. Therefore, the power supply is mostly used in the mode of module series-parallel. However, during actual commissioning, the power supply often does not run at rated current. If the power supply is running at less than 30% of the rated current, the power output current stability will drop sharply. This topic designed a set of digital controller for multi-module serial-parallel control. The digital controller can automatically adjust the number of input modules according to the current setting, and can automatically allocate the required PWM number of the module. While taking into account the synchronization between the various modules, Ensure the power supply is always running at an optimal working condition. Through a special AD conversion hardware design and advanced closed-loop controller algorithm, the digital controller can provide up to 20 high-resolution PWM signals to drive power conversion devices. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1288 EP - 1290 KW - power-supply KW - controls KW - simulation KW - hardware KW - software DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP023 UR - http://jacow.org/ipac2019/papers/tupmp023.pdf ER - TY - CONF AU - Li, Y. AU - Chen, S.Y. AU - Han, C. AU - Liu, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Research on Module Design and Network Management of Accelerator Power Supply System J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Accelerator power supply system is a very special system. Many factors such as high number of power supplies, uninterrupted operation and unreasonable design lead to high failure rate, long maintenance time and the discovery of the fault is not timely, which bring a lot of unnecessary troubles to the operator. In this paper, a networked control method for accelerator power supply is studied, and the power supply parallel connection technology is used to maximize the trouble-free time of the power supply and increase the redundancy performance of the power supply. With independent networked control, the accelerator power supply system becomes a whole, no longer relying solely on the control of the accelerator control system, but in a network system with self-diagnosis and self-healing. Through the monitoring and management of the upper computer, the power supply system will be work stable, and the function of remote operation and remote repair of the power supply is realized finally. This is a research direction for the operation of large accelerator power supply systems in the future. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1291 EP - 1293 KW - power-supply KW - controls KW - interface KW - operation KW - network DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP024 UR - http://jacow.org/ipac2019/papers/tupmp024.pdf ER - TY - CONF AU - Liu, P. AU - Han, C. AU - Long, F. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of Fast Corrector Magnet Power Supply for HEPS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - High energy photon source is a fourth-generation synchrotron radiation light source with energy of 6Gev and ultra-low emittance (<0.1nm’rad). The ultra-low beam emittance requires high beam stability. Therefore, we develop a fast correction power supply with high bandwidth and low current ripple to improve the performance of the fast close orbit correction sys-tem to prove the high beam stability. The power supply adopts FPGA for full-digital control and use high speed ADC with temperature control. The power sup-ply has a small signal-bandwidth of 10 kHz and output current ripple lower than 20ppm. In this paper, we will describe the hardware design and software control methods and the test results will be demonstrated PB - JACoW Publishing CP - Geneva, Switzerland SP - 1294 EP - 1296 KW - power-supply KW - controls KW - simulation KW - experiment KW - radiation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP025 UR - http://jacow.org/ipac2019/papers/tupmp025.pdf ER - TY - CONF AU - Ji, D. AU - Jiao, Y. AU - Ma, H.Z. AU - Yue, J.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Simulation of Model Independent Analysis to HEPS Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Model Independent Analysis (MIA) is a beam analysis method applied for Turn-by-Turn (TBT) Beam Position Monitor (BPM) data. To develop the commissioning method of the HEPS storage ring, we simulate application of MIA on HEPS storage error model to measure and cor-rect the optics parameters. Difficulties and limitations of the MIA method are also discussed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1504 EP - 1506 KW - optics KW - simulation KW - quadrupole KW - storage-ring KW - betatron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW043 UR - http://jacow.org/ipac2019/papers/tupgw043.pdf ER - TY - CONF AU - Jiao, Y. AU - Cui, X. AU - Duan, Z. AU - Guo, Y.Y. AU - He, P. AU - Huang, X.Y. AU - Ji, D. AU - Li, C. AU - Li, J.Y. AU - Li, X.Y. AU - Meng, C. AU - Peng, Y.M. AU - Qin, Q. AU - Tian, S.K. AU - Wang, J.Q. AU - Wang, N. AU - Wei, Y. AU - Xu, G. AU - Xu, H.S. AU - Yan, F. AU - Yu, C.H. AU - Zhao, Y.L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Progress of Lattice Design and Physics Studies on the High Energy Photon Source J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The High Energy Photon Source (HEPS) is an ul-tralow-emittance, kilometer-scale storage ring light source to be built in China. In this paper we will introduce the progress of the physics design and related studies of HEPS over the past year, covering issues in storage ring lattice design, injection and injector design, insertion device effects, error study and lattice calibration, collective effects, etc. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1510 EP - 1513 KW - lattice KW - storage-ring KW - booster KW - photon KW - injection DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW046 UR - http://jacow.org/ipac2019/papers/tupgw046.pdf ER - TY - CONF AU - Duan, Z. AU - Chen, J. AU - Guo, Y.Y. AU - Ji, D. AU - Jiao, Y. AU - Meng, C. AU - Peng, Y.M. AU - Xu, Xu. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Simulation of Injection Efficiency for the High Energy Photon Source J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A ’high-energy accumulation’ scheme [1] was proposed to deliver the full charge bunches for the swap-out injec- tion of the High Energy Photon Source. In this scheme, the depleted storage ring bunches are recovered via merging with small charge bunches in the booster, before being refilled into the storage ring. In particular, the high charge bunches are transferred twice between the storage ring and the booster, and thus it is essential to maintain a near per- fect transmission efficiency in the whole process. In this paper, major error effects affecting the transmission efficiency are analyzed and their tolerances are summarized, injection simulations indicate a satisfactory transmission efficiency is achievable for the present baseline lattice. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1514 EP - 1517 KW - injection KW - booster KW - storage-ring KW - kicker KW - extraction DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW048 UR - http://jacow.org/ipac2019/papers/tupgw048.pdf ER - TY - CONF AU - Peng, Y.M. AU - Li, J.Y. AU - Meng, C. AU - Xu, H.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - STUDY OF THE RAMPING PROCESS FOR HEPS BOOSTER J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The High Energy Photon Source (HEPS) is a 6-GeV, ul-tralow-emittance storage ring light source to be built in Huairou District, Beijing, China. The beam energy ramps from 500 MeV to 6 GeV in 400 ms, during which the RF voltage increases accordingly to keep the momentum acceptance large enough. The booster is designed to operate at 1 Hz repetition frequency. In this paper the energy ramping curve, RF choice, beam parameters changing curves and eddy current effect in HEPS booster will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1521 EP - 1523 KW - booster KW - storage-ring KW - damping KW - lattice KW - injection DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW052 UR - http://jacow.org/ipac2019/papers/tupgw052.pdf ER - TY - CONF AU - Duan, Z. AU - Wang, N. AU - Xu, H.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Simulations of the Injection Transient Instabilities for the High Energy Photon Source J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A "charge recovery in booster" scheme* was proposed to deliver the full charge bunches for the swap-out injection of the High Energy Photon Source. In this scheme, the booster is employed also as a full energy accumulator ring to capture the high charge bunch extracted from the storage ring via merging with the small charge bunch accelerated in the booster, after enough damping in the booster for about 20 ms, the recovered full charge bunch is re-injected into the storage ring. This scheme avoids the challenges to accelerate a bunch charge of ~ 15 nC, and is cost effective compared to building a dedicated 6 GeV accumulator ring. However, there will be a period of time during injection that one bunch is missing in the storage ring, which inevitably introduces some injection transients. Since "transparency" to the user experiments is a desired feature of injection schemes for next generation diffraction-limited storage rings, the injection transient effects are simulated for the proposed injection scheme, and how it would affect the user experiments are carefully evaluated. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1524 EP - 1527 KW - injection KW - feedback KW - simulation KW - lattice KW - storage-ring DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW053 UR - http://jacow.org/ipac2019/papers/tupgw053.pdf ER - TY - CONF AU - Zhou, G. AU - Jiao, Y. AU - Raubenheimer, T.O. AU - Tsai, C.-Y. AU - Wang, J.Q. AU - Wu, J. AU - Yang, C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Coherence Time Characterization for Self-Amplified Spontaneous Emission Free-Electron Lasers J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - One of the key challenges in scientific researches based on free-electron lasers (FELs) is the characterization of the coherence time of the ultra-fast hard x-ray pulse, which fundamentally influences the interaction process between x-ray and materials. Conventional optical methods, based on autocorrelation, is very difficult to realize due to the lack of mirrors. Here, we experimentally demonstrate a conceptually new coherence time characterization method and a coherence time of 174.7 attoseonds has been measured for the 6.92 keV FEL pulses at Linac Coherent Light Source. In our experiment, a phase shifter is adopted to control the cross-correlation between x-ray and microbunched electrons. This approach provides critical temporal coherence diagnostics for x-ray FELs, and is decoupled from machine parameters, applicable for any photon energy, radiation brightness, repetition rate and FEL pulse duration, etc. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1820 EP - 1823 KW - electron KW - FEL KW - laser KW - free-electron-laser KW - radiation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB062 UR - http://jacow.org/ipac2019/papers/tuprb062.pdf ER - TY - CONF AU - An, Y.W. AU - Cao, X. AU - Chen, W. AU - Huang, T. AU - Li, H. AU - Liu, S. AU - Lv, Y.J. AU - Ouyang, H.F. AU - Xiao, Y.C. AU - Xue, K. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Operation Status of CSNS Front End J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - China spallation neutron source (CSNS), as the China’s first 100kW beam power pulsed neutron source, its operation target beam power is now larger than 50kW. During the beam power upgrading process of CSNS to 50kW from 2018 to 2019, many improvements have been made for the front end of CSNS. In this paper, the commissioning and improvement of front end as well as the laboratory construction are introduced. The improvements mainly focus on solving the stability of ion source and the spark of Radio Frequncy quadrupole (RFQ) caused by the pre-chopped beam into RFQ. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2024 EP - 2026 KW - rfq KW - ion-source KW - emittance KW - LEBT KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPTS038 UR - http://jacow.org/ipac2019/papers/tupts038.pdf ER - TY - CONF AU - Wang, S. AU - Huang, M.Y. AU - Xu, S.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Preliminary Study on the Injection System Upgrade for CSNS-II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The first phase of the China Spallation Neutron Source (CSNS-I) had completed the national acceptance in August, 2018. The physics design of the second phase (CSNS-II) has already begun. The CSNS-II accelerator upgrade contains three main components, including the Linac energy upgrade from 80 MeV to 300 MeV, injection system upgrade, and new Magnetic Alloy dual-harmonic cavity. In this paper, a preliminary study on the injection system upgrade had been done. A preliminary upgrade scheme for the injection system would be given. Furthermore, some preliminary simulation and calculation for the upgrade injection system had been carried out. The analysis results showed that most injection parameters can preliminarily meet the requirements of accelerator power upgrade. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2037 EP - 2039 KW - injection KW - simulation KW - linac KW - power-supply KW - neutron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPTS048 UR - http://jacow.org/ipac2019/papers/tupts048.pdf ER - TY - CONF AU - Zheng, L.M. AU - Chen, H. AU - Du, Y.C. AU - Gao, B. AU - Huang, W.-H. AU - Li, R.K. AU - Li, Z.Z. AU - Tang, C.-X. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of a 217 MHz VHF Gun at Tsinghua University J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A 217 MHz VHF gun operating in CW mode is designing at Tsinghua University. The cathode gradient is designed to be 30 MV/m to accelerate the electron bunches up to 878 keV. The cavity profile is optimized in CST to minimize the input power, peak surface electric field, and peak wall power density. The multipacting analysis and the thermal analysis are also presented in this paper. Further gun shape optimization and mechanical design are ongoing. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2050 EP - 2053 KW - gun KW - cathode KW - electron KW - cavity KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPTS053 UR - http://jacow.org/ipac2019/papers/tupts053.pdf ER - TY - CONF AU - Yu, C.H. AU - Bai, S. AU - Cui, X. AU - Gao, J. AU - Geng, H. AU - Gong, D.J. AU - Ji, D. AU - Liu, Y.D. AU - Meng, C. AU - Qin, Q. AU - Tang, J.Y. AU - Wang, D. AU - Wang, N. AU - Wang, Y. AU - Wei, Y. AU - Zhai, J.Y. AU - Zhang, Y. AU - Zheng, H.J. AU - Zhu, Y.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Status of Circular Electron-Positron Collider and Super Proton-Proton Collider J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Circular electron-positron collider (CEPC) is a dedi-cated project proposed by China to research the Higgs boson. The collider ring provides e⁺ e⁻ collision at two interaction points (IP). The luminosity for the Higgs mode at the beam energy of 120GeV is 3*10³⁴ cm⁻²s⁻¹ at each IP while the synchrotron radiation (SR) power per beam is 30MW. Furthermore, CEPC is compatible with W and Z experiments, for which the beam energies are 80 GeV and 45.5 GeV respectively. The luminosity at the Z mode is higher than 1.7*10³⁵ cm⁻²s⁻¹ per IP. Top-up operation is available during the data taking of high energy physics. Super Proton-Proton Collider (SPPC) is envisioned to be an extremely powerful machine, with centre mass energy of 75 TeV, a nominal luminosity of 1.0*10³⁵ cm⁻²s⁻¹ per IP, and an integrated luminosity of 30 ab⁻¹ assuming 2 interaction points and ten years of running. The status of CEPC and SPPC will be introduced in detail in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2244 EP - 2248 KW - collider KW - injection KW - luminosity KW - booster KW - cavity DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEYPLM1 UR - http://jacow.org/ipac2019/papers/weyplm1.pdf ER - TY - CONF AU - Salvant, B. AU - Amorim, D. AU - Antipov, S.A. AU - Arsenyev, S. AU - Beck, M.S. AU - Biancacci, N. AU - Brüning, O.S. AU - Campelo, J.V. AU - Carideo, E. AU - Caspers, F. AU - Dalascu, T. AU - Farricker, A. AU - Grudiev, A. AU - Kaltenbacher, T. AU - Koukovini-Platia, E. AU - Kramer, P. AU - Lasheen, A. AU - Migliorati, M. AU - Mounet, N. AU - Métral, E. AU - Nagaoka, R. AU - Nasr Esfahani, N. AU - Persichelli, S. AU - Popovic, B.K. AU - Rijoff, T.L. AU - Rumolo, G. AU - Shaposhnikova, E.N. AU - Smaluk, V.V. AU - Spataro, B. AU - Vaccaro, V.G. AU - Vollinger, C. AU - Wang, N. AU - White, S.M. AU - Zannini, C. AU - Zotter, B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Building the Impedance Model of a Real Machine J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A reliable impedance model of a particle accelerator can be built by combining the beam coupling impedances of all the components. This is a necessary step to be able to evaluate the machine performance limitations, identify the main contributors in case an impedance reduction is required, and study the interaction with other mechanisms such as optics nonlinearities, transverse damper, noise, space charge, electron cloud, beam-beam (in a collider). The main phases to create a realistic impedance model, and verify it experimentally, will be reviewed, highlighting the main challenges. Some examples will be presented revealing the levels of precision of machine impedance models that have been achieved. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2249 EP - 2254 KW - impedance KW - simulation KW - wakefield KW - coupling KW - cavity DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEYPLS1 UR - http://jacow.org/ipac2019/papers/weypls1.pdf ER - TY - CONF AU - Huang, M.Y. AU - Wang, S. AU - Xu, S.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Residual Orbits Estimation of the Injection Painting Bumps for CSNS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - There are three bumps (one chicane bump and two painting bumps) in the injection system of the China Spallation Neutron Source (CSNS). They are the core parts of the injection system and the important guarantee that the Linac beam injecting into the rapid cycling synchrotron (RCS). During the beam commissioning, to check the effect of the residual orbits of the three bumps in the injection region was an important problem. In this paper, the residual orbits of BH and BV painting bumps were studied and estimated in the beam commissioning. The data analysis results showed that the residual orbits of BH and BV painting bumps were very small and they didn’t need to be corrected. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2326 EP - 2328 KW - injection KW - MMI KW - neutron KW - dipole KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP011 UR - http://jacow.org/ipac2019/papers/wepmp011.pdf ER - TY - CONF AU - Huang, M.Y. AU - Wang, S. AU - Xu, S.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Beam Loss and the Stripping Efficiency Measurement for CSNS Injection System J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The injection beam loss is the main beam loss of the rapid cycling synchrotron (RCS) for the China Spallation Neutron Source (CSNS). After the optimization of injection system during the beam commissioning, the current injection beam loss for CSNS/RCS is approximately 1%. There are several sources of injection beam loss. In order to distinguish these different sources, the stripping efficiency of the main stripping foil should be studied and measured accurately. In this paper, a scheme for the accurate measurement of the stripping efficiency for CSNS will be proposed and studied. It can not only reduce the injection beam loss, but also be used to estimate the operation state and lifespan of the main stripping foil accurately. This method will be applied in future beam commissioning. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2329 EP - 2331 KW - injection KW - operation KW - MMI KW - neutron KW - proton DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP012 UR - http://jacow.org/ipac2019/papers/wepmp012.pdf ER - TY - CONF AU - Huang, L. AU - Wang, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Slow Extraction Study by Using Sextupole J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The spill continuously extracted from synchrotron by using resonance sextupoles plays a key role in multidisciplinary application. The intensity of virtual sextupole and the spiral step for the typical synchrotron are obtained theoretically. A customized synchrotron of extraction components placed in dispersion section is designed and the tracking code of slow extraction is developed, thus the theoretical spiral step is comparative studied. To study the beam loss, three layouts of extraction are also designed based on the synchrotron. The result shows that the beam losses at extraction point are different for three cases and it is advantage to beam loss for extraction components placed in dispersion-free straight section. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2332 EP - 2334 KW - extraction KW - sextupole KW - synchrotron KW - resonance KW - proton DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP014 UR - http://jacow.org/ipac2019/papers/wepmp014.pdf ER - TY - CONF AU - Chen, J. AU - Duan, Z. AU - Huo, L. AU - Li, Y. AU - Shi, H. AU - Wang, G. AU - Wang, L. AU - Wang, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A Novel Non-Linear Strip-Line Kicker Driven by Fast Pulser in Common Mode J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The next generation storage ring-based light sources adopt multi-bend achromat lattices to achieve a low emittance. The dynamic apertures of these machines are usually less than 10 mm so that the traditional pulsed local bump injection is difficult to achieve. Off-axis injection with a pulsed multipole or a non-linear kicker could be a viable solution which requires a moderate dynamic aperture of a few mm. In this paper, a novel non-linear kicker design is presented. Unlike pulsed sextupole or nonlinear kicker magnet, the nonlinear kicker we proposed is a traveling wave kicker with 2 strip-line electrodes driven by a nanosecond-level fast pulser in common mode. The disturbance to the stored beam is minimal since the perturbation is limited to the target bunch alone. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2345 EP - 2348 KW - kicker KW - injection KW - impedance KW - dynamic-aperture KW - multipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP018 UR - http://jacow.org/ipac2019/papers/wepmp018.pdf ER - TY - CONF AU - Peng, Y.M. AU - Meng, C. AU - Xu, H.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Physical Design of HEPS Low Energy Transport Line J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - he High Energy Photon Source (HEPS), a kilometre-scale storage ring based light source, with emittance less than 60 pm.rad, will be constructed in Beijing, China. It con-sists of a 500 MeV linac, a 500 MeV low energy transport line, a full energy booster synchrotron, two 6- GeV transport lines, a 6 GeV ultra-low emittance storage ring, and the beam line experimental stations. The low energy transport line connecting the linac and the booster. Based on the construction layout restrictions, the beam enve-lopes of the linac and the booster should be matched, and the beam produced by the linac is high efficiently trans-mitted to the booster injection point. HEPS low energy transport line has three functional sections, the achromat injection matching section, the optics matching section and the output matching section. In order to correct the error effects on the beam, 8 BPM are set in the low energy transport line. There are also 6 horizontal correctors and 6vertical correctors for beam trajectory correction. This paper will show the detailed design of HEPS low energy transport line. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2349 EP - 2352 KW - booster KW - linac KW - injection KW - dipole KW - lattice DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP019 UR - http://jacow.org/ipac2019/papers/wepmp019.pdf ER - TY - CONF AU - Esposito, L.S. AU - Addesa, F.M. AU - Afonin, A.G. AU - Bestman, P. AU - Borg, J.E. AU - Butcher, M.E.J. AU - Calviani, M. AU - Chesnokov, Y.A. AU - Denisov, A.S. AU - Di Castro, M. AU - Donzé, M. AU - Durum, A.A. AU - Fraser, M.A. AU - Galluccio, F. AU - Garattini, M. AU - Gavrikov, Y. AU - Gilardoni, S.S. AU - Goddard, B. AU - Hall, G. AU - Iacoangeli, F. AU - Ivanov, Yu.M. AU - James, T. AU - Kain, V. AU - Kovalenko, A.D. AU - Koznov, M.A. AU - Lendaro, J. AU - Maisheev, V.A. AU - Malyarenko, L.G. AU - Masi, A. AU - Murtas, F. AU - Natochii, A. AU - Pari, M. AU - Pesaresi, M. AU - Prieto, J. AU - Rossi, R. AU - Sandomirskiy, Yu.E. AU - Scandale, W. AU - Seidenbinder, R. AU - Serrano Galvez, P. AU - Skorobogatov, V. AU - Stoel, L.S. AU - Taratin, A.M. AU - Velotti, F.M. AU - Yanovich, A.A. AU - Zhovkovska, V. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Crystal for Slow Extraction Loss-Reduction of the SPS Electrostatic Septum J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The use of a bent crystal was investigated in order to reduce the losses at the CERN Super Proton Synchrotron (SPS) electrostatic septa (ZS) during the slow extraction of 400 GeV protons toward the North Area. The crystal, installed a few meters upstream the ZS, bends protons that would otherwise impinge on the ZS wires. Since particle deflection with good efficiency is achieved only when the crystal lattice is aligned within ~10 urad to the trajectory of the particles (at p = 400 GeV/c), a compact goniometer was built to allow the correct angular alignment of the crystal with respect to the incoming beam with a precision of few urad. In this paper, we report on the crystal features measured during a dedicated beam test by the UA9 experimental installation in the CERN H8 beam line. Details of the goniometer and its installation are also reported. The first results achieved during dedicated Machine Development (MD) sessions are finally presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2379 EP - 2382 KW - extraction KW - proton KW - experiment KW - ECR KW - alignment DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPMP028 UR - http://jacow.org/ipac2019/papers/wepmp028.pdf ER - TY - CONF AU - Wang, L. AU - Chu, C.P. AU - Guo, F.Q. AU - He, Y.C. AU - Jin, D.P. AU - Kang, M.T. AU - Wu, X. AU - Zhang, Y.L. AU - Zhu, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Quality Assurance for CSNS Operation J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Because CSNS (China Spallation Neutron Source) is now in early operation, the focus has been shifted from beam commissioning to reliable operation, therefore, a suite of QA tools are under development. These tools include Elog system and operation issue tracking system which can record events and track issue status in the process of operation. This paper will describe the application of QA tools in CSNS and the development progress of them. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2575 EP - 2577 KW - operation KW - database KW - interface KW - MMI KW - controls DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW043 UR - http://jacow.org/ipac2019/papers/wepgw043.pdf ER - TY - CONF AU - Kang, L. AU - Chen, J.X. AU - He, H.Y. AU - Liu, L. AU - Liu, R.H. AU - Nie, X.J. AU - Ning, C.J. AU - Wang, A.X. AU - Wang, G.Y. AU - Yu, J.B. AU - Yu, Y.J. AU - Zhang, J.S. AU - Zhu, D.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Key Technologies for Remote Detection of CSNS Radiation Environment J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - China Spallation Neutron Source (CSNS) has been continuously operating in September 2018. As the operating time increases the radiation dose will also increase, some equipment maintenance and testing must take special tools and equipment. This article mainly introduced the studies on radiation environment of several detection technologies, such as: remote vacuum leak detection methods and equipment, strong magnetic field environment vibration measuring technology, using Qr code tracing machine walking vehicle inspection system and remote image vision measurement technology, etc., these advanced technology also has a guiding significance to other related fields. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2584 EP - 2586 KW - vacuum KW - controls KW - radiation KW - operation KW - target DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW046 UR - http://jacow.org/ipac2019/papers/wepgw046.pdf ER - TY - CONF AU - Sun, J.L. AU - Qiu, R.Y. AU - Tian, J.M. AU - Xu, T.G. AU - Xu, Zh.H. AU - Yang, T. AU - Zeng, L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Study with Wire Scanner and Beam Loss Monitor at CSNS-LINAC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - China Spallation Neutron Source (CSNS) consists of 80 MeV H⁻ LINAC, 1.6 GeV RCS, RTBT line and one target. Many wire scanners and beam loss monitors (BLM) distributed along the LINAC and the RTBT for the profile and beam loss measurement. For the wire scanner, signal on the wire induced by the secondary electron is used for the profile measurement. Signal lost may happen when the wire or the signal chain shorted, thus a backup readout chain is required for the accident condition. As for the BLM, it is difficult to do the online calibration to see how sensitive the monitor is. Based on the two requests above, a crosscheck study was carried out recently, one wire scanner and the BLM next to it were chose at LINAC and RTBT. Both wire signal and BLM signal were recorded while the wire scanner crossing the beam. We found these two type of signals have the same accuracy for the profile measurement, and ~ 1 μA beam loss induced by the wire disturbance can be detected. Also thermal electron emission suspected happening during the measurement. More detailed experiment will be carried out in December. Secondary electron emission efficiency of the tungsten wire and thermal electron emission rate will be verified then. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2598 EP - 2601 KW - MEBT KW - electron KW - experiment KW - linac KW - neutron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW053 UR - http://jacow.org/ipac2019/papers/wepgw053.pdf ER - TY - CONF AU - Xiao, D.J. AU - Chu, C.P. AU - Qiao, Y.S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Orbit Correction With Machine Learning J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Orbit correction is usually an important task in the operation of accelerators. In practice, due to various errors, many devices can not operate in ideal state. By correcting the errors of magnets with corrector magnets, the beam can return to the correct position to ensure the stable operation of the accelerator. In the process of orbit correction, inaccurate BPM output will lead to incorrect correction magnet strength setting, so that the orbit correction will be impacted. BPM may make mistakes in the process of signal acquisition and current conversion. A BPM anomaly detection and predict method based on machine learning and its using in orbit correction optimization is reported in this paper. This method does not need to observe the details of BPM system, electronics technology and so on. It can monitor and predict the BPM status directly by machine learning with the information of the beam inferred from BPM and others, and optimize the orbit correction. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2608 EP - 2610 KW - lattice KW - storage-ring KW - closed-orbit KW - simulation KW - coupling DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW058 UR - http://jacow.org/ipac2019/papers/wepgw058.pdf ER - TY - CONF AU - Yuan, Y. AU - Li, P. AU - Xu, S.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A Preliminary Feasibility Study of Measurement of Quadrupolar Beam Oscillations at CSNS RCS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In high intensity proton synchrotrons, linear and nonlinear betatron resonances cause beam loss. When the betatron tune spreads over a resonance line, the betatron oscillation amplitude will get larger, causing large beam loss. In the quadrupolar beam transfer function, the coherent space-charge tune shift of quadrupolar beam oscillations is used to determine the incoherent tune shift. China Spallation Neutron Source (CSNS) is a high intensity accelerator based facility consists of linear accelerator and the Rapid Cycle Synchrotron (RCS). A system of quadrupolar pick-up and kicker can be used for evaluating tune shifts and spreads. This paper will present already existing beam diagnostic instrumentation on CSNS/RCS, and discuss feasibility study of measurement of quadrupolar beam oscillations through adding a quadrupolar-type beam pick-up. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2611 EP - 2612 KW - quadrupole KW - pick-up KW - space-charge KW - kicker KW - synchrotron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW059 UR - http://jacow.org/ipac2019/papers/wepgw059.pdf ER - TY - CONF AU - Zhu, D.C. AU - Cao, J.S. AU - Sui, Y.F. AU - Yue, J.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Synchrotron Light Diagnostic Beamline Design for HEPS Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - High Energy Photon Source (HEPS) is a 6 GeV ul-tralow-emittance storage ring light source to be built in Beijing, China. With a multiple-bend achromat lattice design, the storage ring is expected to achieve an ul-tralow emittance of 34 pm.rad. The horizontal and verti-cal beam sizes will be in the sub-10 μm level. Beam emit-tance will be measured with x-ray diagnostic beamline at a low dispersion bending magnet source point. A visible light beamline will be designed to measure the bunch length and purity. In this paper, we will introduce the x-ray beamline, which combine with different techniques to resolve beam sizes and emittance. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2619 EP - 2621 KW - emittance KW - photon KW - diagnostics KW - storage-ring KW - lattice DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW062 UR - http://jacow.org/ipac2019/papers/wepgw062.pdf ER - TY - CONF AU - Yu, L. AU - Sui, Y.F. AU - Wang, L. AU - Zhu, D.C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Fiber-based Cherenkov Beam Loss and Beam Profile Monitor at BEPC II J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A fiber-based Cherenkov beam loss monitor (CBLM) consisting of large core (400μm), long (50 m) multimode fibers, has been developed as an long-range detection tool for the BEPCII: primarily designed for radiation safety in order to limit the dose outside the shielding of the machine, this monitor also serves as an tool to measure beam profile with the wire sccaner. In this paper, principal of operation, instrumentation and programming of these CBLMs are discussed. Some results of beam loss and beam profile measurement with these CBLMs are also presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2622 EP - 2624 KW - linac KW - operation KW - electron KW - instrumentation KW - beam-losses DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW063 UR - http://jacow.org/ipac2019/papers/wepgw063.pdf ER - TY - CONF AU - Dai, J.P. AU - Mi, Z.H. AU - Sha, P. AU - Sun, Y. AU - Wang, Q.Y. AU - Xiao, L.G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - SRF Trip Caused by the Tuner in BEPCII J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The stability and reliability of the Superconducting RF system (SRF) is generally a key issue in a large scale accelerator such as Beijing Electron Positron Collider II (BEPCII). In the past several years, SRF is one of the main factors limiting the availability of BEPCII, and many efforts have been made to fix the SCRF troubles. This paper focuses on the details of the SCRF trip caused by the tuner, which is one of the most persistent troubles and figured out till the summer of 2018. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2880 EP - 2882 KW - SRF KW - cavity KW - electron KW - operation KW - collider DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB031 UR - http://jacow.org/ipac2019/papers/weprb031.pdf ER - TY - CONF AU - Jin, S. AU - Dai, J. AU - Dai, J.P. AU - Feisi, H.F.S. AU - Gao, J. AU - Gong, D.J. AU - Li, Z.Q. AU - Liu, Z.C. AU - Pan, W.M. AU - Sha, P. AU - Sun, Y. AU - Zhai, J.Y. AU - Zhang, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Development of EP System at IHEP J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Electropolishing (EP) is a necessary technology for high quality cavities including both high accelerating gradient and high quality factor cavities, which will be used for several future large projects such as CEPC, Shanghai hard X-ray FEL, ILC, and so on. An EP system was development at IHEP, CAS. In last years, we finished all the engineering design and fabrication including functional circulation loops design, system parameters choices, key equipment choice or design, components test and fabrication. According to the functions of various components, the whole system were divided into three main units: electrolyte mixing, acid solution and mechanical platform, and several key components such as rotation sleeves, DC power supply and so on. Since the system is designed for both R&D and mass production, several characteristics comparing with those in other labs in the world can be realized, including dozens of solution circulations, electrolyte mixing, new and old acid separation, cavity outside water cooling, cathode vertical assembly, and compatible for several types of cavities. We will report them in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2890 EP - 2892 KW - cavity KW - controls KW - MMI KW - power-supply KW - cathode DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB037 UR - http://jacow.org/ipac2019/papers/weprb037.pdf ER - TY - CONF AU - He, X. AU - Meng, C. AU - Pei, S. AU - Wang, J.L. AU - Xiao, O. AU - Zhou, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Suppression of Secondary Electron Yield Effect in the 650MHz/800kW Klystron for CEPC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The circular electron positron collider (CEPC) is in pre-research, it will need more than two hundred 650MHz/800kW klystrons. The secondary electron yield (SEY) effect suppression is very important for the klystron working stable. The simulation uses an incident primary electron source and considers all the phases and power levels of the input microwave. Two methods are simulated for the SEY suppression. The groove cutting on the nose of cavities is much simple while the TiN coating can suppress better. The effect after groove cutting on nose is also simulated and the corresponding compensations are adopted. For simplify the fabrication progress as well as some experience that can be referenced, the groove cutting method is adopted finally for the first klystron prototype, which is expected to be available in the summer of 2019. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2906 EP - 2908 KW - cavity KW - klystron KW - simulation KW - electron KW - multipactoring DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB045 UR - http://jacow.org/ipac2019/papers/weprb045.pdf ER - TY - CONF AU - He, X. AU - Deng, B. AU - Lei, J. AU - Meng, C. AU - Pei, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Development of Flexible Waveguide for High Power High Vacuum Applications in S-band J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A novel flexible waveguide is developed for S band 2856 MHz, which is a standard WR284 waveguide. The surface of the flexible waveguide is plated with Oxygen-free High Conductivity (OFHC) copper for the purpose of welding with the stainless steel flange in the vacuum furnace, for the flexible waveguide itself is made of brass. The prototype has got a certain amount of deformation which will be much more convenient for the connection between two hard waveguides. It also has a good measurement results of the lower power microwave test, and the 72 hours vacuum leakage test shows a satisfactory vacuum performance, no obvious surface collapse is observed. The high power test will be conducted after our high power test facility is available, which will tell us the maximal power level of the flexible waveguide prototype. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2909 EP - 2911 KW - GUI KW - vacuum KW - simulation KW - factory KW - linac DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB046 UR - http://jacow.org/ipac2019/papers/weprb046.pdf ER - TY - CONF AU - Fan, M.X. AU - Chen, Q. AU - Fu, S. AU - Li, A.H. AU - Li, B. AU - Liu, H.C. AU - Peng, J. AU - Qu, P.H. AU - Wang, A.X. AU - Wang, Y. AU - Wu, X.L. AU - Xiaolei, X.L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Multipacting Studies of the Coaxial Coupler for BNCT DTL J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Multipacting is a phenomenon in which electrons grow sharply under certain conditions in a RF structure. It may lead to the breakdown or even damage to the equipment. Therefore, it is very important to calculate the Multipact-ing range in the RF equipment design. Since the phe-nomenon is too complicated to use the formula to fully predict it, numerical simulation is employed. There are many computer codes (such as Track3P, MultiPac, CST PS, etc.) used to simulate the phenomenon, but most of them are not commercial. In this paper, theories used in coaxial line for predicting multipacting are introduced; the CST PS is chosen to simulate the multipacting of coaxial coupler for BNCT DTL; finally, methods of sup-pressing multipacting are discussed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2921 EP - 2924 KW - multipactoring KW - simulation KW - DTL KW - impedance KW - neutron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB050 UR - http://jacow.org/ipac2019/papers/weprb050.pdf ER - TY - CONF AU - Wu, B. AU - Li, X. AU - Sun, H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The dual harmonic RF system will be adapted for Chi-na Spallation Neutron Source (CSNS) upgrade project. Limited locations in CSNS/RCS are reserved to install additional three 2nd harmonic cavities. The cavity loaded by magnetic alloy (MA) material would be used. Because of the low Q factor of the MA core, the cavity cooling be-comes a very important issue in cavity design. Air-forced, indirect and direct cooling scheme were studied. The fluid thermodynamic of different cooling structure were simu-lated by ANSYS CFX which considered the anisotropy of thermal conductivity of MA core. The limitation of these cooling schemes were discussed in detail based on the simulation results. Indirect cooling experiment was done to assess the cooling efficiency and verify the simulation result. A high power test cavity cooled by water has been designed to estimate the property of the MA core and cooling effectiveness for CSNS/RCS. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2925 EP - 2927 KW - cavity KW - simulation KW - experiment KW - synchrotron KW - detector DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB051 UR - http://jacow.org/ipac2019/papers/weprb051.pdf ER - TY - CONF AU - Li, M.T. AU - An, Y.W. AU - Wang, S. AU - Xu, S.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Synchronization between BPMs and Corrector Power Supplies in AC Mode of RCS of CSNS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - This paper introduces our effort for synchronizing BPMs and Corrector Power Supplies in AC mode of RCS of CSNS. This work helps to increase the accuracy of the response matrix measurement, the obit correction, and other commissioning task. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3164 EP - 3166 KW - power-supply KW - timing KW - MMI KW - pick-up KW - neutron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPTS029 UR - http://jacow.org/ipac2019/papers/wepts029.pdf ER - TY - CONF AU - Zhukov, A.P. AU - Allen, C.K. AU - Bolling, B.E. AU - Chu, C.P. AU - Dodson, T. AU - Esteban Müller, J.F. AU - Gillette, P. AU - Laface, E. AU - Laurent, P. AU - Levinsen, Y. AU - Li, M.T. AU - Li, Y. AU - Lu, X.H. AU - Milas, N. AU - Normand, G. AU - Peng, J. AU - Rosati, C. AU - Savalle, A. AU - Shishlo, A.P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Open XAL Status Report 2019 J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Open XAL accelerator physics software platform is being developed through an international collaboration among several facilities since 2010. This paper discusses progress in beam dynamics simulation, new RF models, and updated application framework along with new generic accelerator physics applications. We present the current status of the project, a roadmap for continued development and an overview of the project status at each participating facility. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3341 EP - 3344 KW - cavity KW - LEBT KW - linac KW - framework KW - status DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPTS096 UR - http://jacow.org/ipac2019/papers/wepts096.pdf ER - TY - CONF AU - Wang, S.W. AU - Li, J.Y. AU - Wang, Y.G. AU - Xu, W. AU - Xuan, K. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Optimization of a Low-Alpha Lattice for the HLS-II Storage Ring J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - To generate terahertz radiation at HLS-II, a low-alpha lattice scheme is proposed. The new lattice can reduce the bunch length in the storage ring, thus enhancing the coherent synchrotron radiation in the THz region. In this paper, the design and optimization of a low-alpha lattice is reported. The new lattice preserves the symmetry of nominal lattice and reduces the first and second order momentum factor at the cost of increasing maximum beta function and natural emittance. The bunch length is tracked and the result shows that the low-alpha lattice can effectively compress bunches in the storage ring. The performance of this low-alpha lattice can be further studied and improved. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3360 EP - 3362 KW - lattice KW - storage-ring KW - quadrupole KW - dynamic-aperture KW - sextupole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPTS103 UR - http://jacow.org/ipac2019/papers/wepts103.pdf ER - TY - CONF AU - Velotti, F.M. AU - Addesa, F.M. AU - Afonin, A.G. AU - Bestmann, P. AU - Borg, J.E. AU - Butcher, M.E.J. AU - Calviani, M. AU - Chesnokov, Y.A. AU - Denisov, A.S. AU - Di Castro, M. AU - Donzé, M. AU - Durum, A.A. AU - Esposito, L.S. AU - Fraser, M.A. AU - Galluccio, F. AU - Garattini, M. AU - Gavrikov, Y. AU - Gilardoni, S.S. AU - Goddard, B. AU - Hall, G. AU - Iacoangeli, F. AU - Ivanov, Yu.M. AU - James, T. AU - Kain, V. AU - Koznov, M.A. AU - Lendaro, J. AU - Maisheev, V.A. AU - Malyarenko, L.G. AU - Masi, A. AU - Mirarchi, D. AU - Murtas, F. AU - Pari, M. AU - Pesaresi, M. AU - Prieto, J. AU - Redaelli, S. AU - Rossi, R. AU - Sandomirskiy, Yu.E. AU - Scandale, W. AU - Seidenbinder, R. AU - Serrano Galvez, P. AU - Skorobogatov, V. AU - Stoel, L.S. AU - Yanovich, A.A. AU - Zamantzas, C. AU - Zhovkovska, V. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A proof-of-principle experiment demonstrating the feasibility of using a thin, bent crystal aligned upstream of an extraction septum (ES) to increase the efficiency of the third-integer resonant slow extraction process has been carried out at the CERN Super Proton Synchrotron (SPS). With the primary aim of reducing the beam loss and induced radio-activation of the SPS, the crystal was aligned to both the beam and the septum to reduce by up to 40% the beam intensity impinging the ES and increase the intensity entering the external transfer line. In this contribution, we introduce the concept and the prototype system that was installed in 2018 before reporting in detail on the dedicated program of machine development studies carried out to characterise its performance and demonstrate operational feasibility. The performance reach and compatibility with other loss reduction techniques proposed to further increase the extraction efficiency, such as phase space folding with octupoles, is discussed in view of future high intensity operation. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3399 EP - 3403 KW - extraction KW - operation KW - septum KW - optics KW - experiment DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THXXPLM2 UR - http://jacow.org/ipac2019/papers/thxxplm2.pdf ER - TY - CONF AU - Li, Y. AU - Bao, Y. AU - Fan, R. AU - Li, X. AU - Ning, C.J. AU - Tong, X. AU - Wang, P.C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Moderation of Positive Muons by Helium Gas J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Efficiently creating beams of spin-polarized positive muons with energies between eV and keV (so-called slow muon beams) is important for further development and application of muon spin rotation, relaxation, and resonance techniques. One existing moderation method involves the use of wide-band-gap materials as moderators such as rare gas solids and solid nitrogen thin films (band-gap energy between 11 eV and 22 eV). Based on this moderation method, we have studied the use of helium gas as a moderator, with the goal of producing the slow muon beam more efficiently. Because of helium’s high (24.6 eV) ionization energy and because the cross section for muonium formation is suppressed in helium gas, we expect the production of slow muons using helium gas to be highly efficient. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3667 EP - 3669 KW - proton KW - experiment KW - simulation KW - scattering KW - vacuum DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPGW039 UR - http://jacow.org/ipac2019/papers/thpgw039.pdf ER - TY - CONF AU - Song, Y.P. AU - Bao, Y. AU - Chen, Y.K. AU - Jing, H.T. AU - Meng, C. AU - Tang, J.Y. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Decay Muon Beamline Design for EMuS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The beamline design philosophies and simulation re-sults of the decay muon on Experimental Muon Source (EMuS) are reported in this paper. The beamline is com-posed of solenoids to keep large acceptance, and has been optimized for 45, 150 and 450 MeV/c decay muon re-spectively according to the π spectra optimization results from target station. Decay muons from 45 to 150 MeV/c are designed for μSR applications, and 150 to 450 MeV/c are designed for muon imaging, which is unique on the high momentum perspective. Negative muons from 45 to 150 MeV/c are designed for muonic applications. The momentum range of decay muon is tuneable between 45 and 450 MeV/c. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3670 EP - 3672 KW - target KW - proton KW - solenoid KW - simulation KW - dipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPGW040 UR - http://jacow.org/ipac2019/papers/thpgw040.pdf ER - TY - CONF AU - Bouquerel, E. AU - Baussan, E. AU - Cupial, P. AU - D'Alessi, L. AU - Dracos, M. AU - Koziol, M. AU - Vassilopoulos, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The ESSnuSB Target Station J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The ESSνSB project, recently granted by the EU H₂020 programme for a 4-year design study, proposes to use the protons produced by the linac (2 GeV, 5 MW) of the European Spallation Source (ESS) currently in construction in Lund (Sweden) to deliver a neutrino super beam. It follows the studies made by the FP7 Design Study EUROν[1] (2008-2012), regarding future neutrino facilities. The primary proton beam line completing the linear accelerator will consist of one or several accumulator rings and a proton beam switchyard. The secondary beam line producing neutrinos will consist of a four-horn/target station, a decay tunnel and a beam dump. A challenging component of this project is the enormous target heat-load generated by the 5 MW proton beam. In order to reduce this heat-load there will be four targets, which will be hit in sequence by the compressed proton pulses, thereby reducing the beam power on each target to 1.25 MW. Following the EUROν studies, a packed bed of titanium spheres cooled with helium gas has become the baseline design for a Super Beam based on a 2-5 GeV proton beam with a power of up to 1 MW per target, with other targets being considered for comparison. The hadron collection will be performed by four hadron collectors (magnetic horns), one for each target. Each of these target/hadron-collector assemblies will receive proton pulses three times more frequently than in present projects, and by an average beam power of 1.25 MW, which is twice as high as in present neutrino projects. The feasibility of the target/horn station for the ESSνSB project is discussed here. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3831 EP - 3834 KW - target KW - proton KW - hadron KW - linac KW - electron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB013 UR - http://jacow.org/ipac2019/papers/thprb013.pdf ER - TY - CONF AU - Wang, L. AU - Chen, J. AU - Huo, L. AU - Liu, P. AU - Shi, H. AU - Shi, X.L. AU - Wang, G. AU - Wang, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A 300 mm Long Prototype Strip-Line Kicker for the Heps Injection System J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In the High Energy Photon Source (HEPS), the dynamic aperture of machine is not large enough for off-axis injec-tion for its baseline 7BA lattice design. So, a group of superfast kickers with about 12 ns pulse bottom width are needed for on-axis swap out injection scheme. The design about a couple sets of 300 mm long strip-line kickers is presented. Five kickers as a module are placed in a stain-less steel vacuum vessel to solve the problem of longitu-dinal space restriction in injection area. So far, the proto-type development of strip-line kicker was completed. The results of time-domain reflectometer (TDR) test and high voltage pulse test show that the strip-line kicker can meet the requirement of the HEPS. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3864 EP - 3867 KW - kicker KW - vacuum KW - injection KW - impedance KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB026 UR - http://jacow.org/ipac2019/papers/thprb026.pdf ER - TY - CONF AU - Huang, X.Y. AU - Cao, J.S. AU - Du, Y.Y. AU - Lu, Y.H. AU - Ma, H.Z. AU - Ma, Y.F. AU - Sui, Y.F. AU - Wei, S.J. AU - Wei, Y. AU - Ye, Q. AU - Zhang, X.E. AU - Zhu, D.C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - New Orbit Correction Method Based on SVDC Algorithm for Ring Based Light Sources J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Orbit feedback system is essential for realizing the exceeding beam stability in modern ring based light sources. Most advanced light sources adopt the global correction scheme by using singular value decomposition (SVD) algorithm. In this paper, a new SVD with constraints method (SVDC) is proposed to correct the global and local orbit simultaneously. Numerical simulations are presented with the case of High Energy Light Source (HEPS) by comparing classic algorithms. The results show that SVDC is very effective for orbit correction and very easy to implement. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3943 EP - 3945 KW - feedback KW - lattice KW - controls KW - simulation KW - photon DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB062 UR - http://jacow.org/ipac2019/papers/thprb062.pdf ER - TY - CONF AU - Wang, J.C. AU - Chu, C.P. AU - Gao, Y. AU - Le, Q. AU - Liu, J. AU - Ye, R. AU - Zhan, M.C. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - HEPS-TF Superconducting Wiggler Control System J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Superconducting Wiggler (SCW) is an important development direction of insertion devices for modern light sources. It is also the key technology of High Energy Photon Source Test Facility (HEPS-TF) insertion device system research. SCW control system involves power supply, cryogenics，vacuum and other devices, control. Serial port server was built for the SCW control system, with EPICS DB to make the PID algorithm for heater and superconductor cavity pressure, temperature, and with Ziegler-Nichols method to quickly find appropriate PID parameters. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4174 EP - 4175 KW - controls KW - EPICS KW - power-supply KW - wiggler KW - interface DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS030 UR - http://jacow.org/ipac2019/papers/thpts030.pdf ER - TY - CONF AU - Li, C.H. AU - Jiao, Y. AU - Li, M.X. AU - Wang, H. AU - Wang, Z. AU - Wu, L. AU - Zhou, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design and Progress of Mechanical Support in HEPS J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - HEPS is a new generation synchrotron facility on construction with very low emittance. Stringent requirements are proposed to the design of mechanical support. The alignment error between girders should be less than 50μm. Based on that, the adjusting resolution of the girder are required to be less than 5μm in both transverse and vertical directions. Besides, the Eigen frequency of magnet & girder assembly should be higher than 54Hz to avoid the amplification of ground vibrations. To fulfill these requirements, studies on mechanical support design is now being carried out in HEPS. This paper will describe the design and progress of those work. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4180 EP - 4182 KW - alignment KW - simulation KW - storage-ring KW - synchrotron KW - emittance DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS034 UR - http://jacow.org/ipac2019/papers/thpts034.pdf ER - TY - CONF AU - Wang, A.X. AU - Chen, J.X. AU - He, H.Y. AU - Kang, L. AU - Liu, L. AU - Nie, X.J. AU - Ning, C.J. AU - Sun, J.L. AU - Wang, G.Y. AU - Yu, J.B. AU - Yu, Y.J. AU - Zhang, J.S. AU - Zhu, D.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Deformation-Stress Simulation and Measurement of Titanium Foil Strip for Hadron Monitor J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The measurement of beam profile by hadron monitor is in fact the measurement of the positive current after the secondary electrons escaped. According to the situation that the number of beam particles is small and the current signal is weak, the material titanium with high secondary electron generation rate is select by material comparison, and the foil strip type is used to increase the cross section area to obtain lager current level. On account of dead weight itself, as well as thermal expansion and contraction, the foil strip shall be loose. The loosen strip will deviate from its theoretical position, and cause the measuring error. Therefore, the deformation-stress of Ti foil strip (1000*50*0.1) was simulated under the pretension (10~90N) with the finite element software ANSYS. A set of experiment device with pretension adjustment and heating for the foil strip was designed, and then the deformation-stress was tested by a high precision 3-D imaging measurement system. Compared with the simulation results, the pretension would better set at about 50N. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4187 EP - 4189 KW - electron KW - simulation KW - experiment KW - hadron KW - ECR DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS037 UR - http://jacow.org/ipac2019/papers/thpts037.pdf ER - TY - CONF AU - Wang, H. AU - Li, C.H. AU - Meng, C. AU - Qu, H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Preliminary Design of Mechanical Supports for the Booster of Heps J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Booster of High Energy Photon Source (HEPS) is a 454 meters ring with the repeat frequency of 1 Hz. The natural frequency of the magnets and their support as-sembly should be higher than 30 Hz. The alignment re-quirements on quadrupole and sextupole are better than 0.1 mm in x and y direction. This paper will discuss the preliminary design of the mechanical supports in Booster ring, as well as the discussion of finite element analyses results. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4197 EP - 4199 KW - booster KW - dipole KW - quadrupole KW - alignment KW - sextupole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS040 UR - http://jacow.org/ipac2019/papers/thpts040.pdf ER - TY - CONF AU - Wang, H. AU - Bai, S. AU - Li, M.X. AU - Liu, Y.D. AU - Meng, C. AU - Qu, H. AU - Wang, J.L. AU - Zhang, P. AU - Zhou, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Progress and TDR Plans of the Mechanical System of CEPC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The TDR of CEPC is aimed at the key science and technology problems and makes preparations for the real project. This paper will describe the progress of mechanical system including the regular supports and transport vehicle design, the mockup plan, the installation scenario of machine detector interface (MDI) and the movable collimator, as well as the TDR plans of mechanical system. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4200 EP - 4203 KW - detector KW - alignment KW - vacuum KW - collider KW - dipole DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS041 UR - http://jacow.org/ipac2019/papers/thpts041.pdf ER - TY - CONF AU - Kovalenko, A.D. AU - Bordini, B. AU - Gromov, V.A.. AU - Kolomiets, A. AU - Kozub, S. AU - Perepelkin, E.E. AU - Shirkov, G. AU - Tkachenko, L. AU - Tommasini, D. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Design of a Fast Cycled Low Loss 6 T Model Dipole Cooling at 1.9 K J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The option being considered for the FCC-hh high energy injector is a superconducting synchrotron replacing the CERN SPS. The new machine would operate in a cycled mode also to feed experimental areas, much like the SPS nowadays. Due to this specific cycled operation, innovative design and development approaches is required to cope with the AC losses in the superconducting cables and iron yoke. The research joins experience accumulated at CERN and JINR respectively in the design and operation of large systems operated at 1.9 K and, in fast ramped and cycled magnets. The specified parameters are the following: magnet aperture -80 mm; aperture field - 6 T; field ramp 0.2-0.5 T/s; coil conductor - NbTi; magnetic field homogeneity between 0.12 and 6 T of the order of 5·10⁻⁴. The minimization of the cycling losses is particular important. Total thermal losses should be limited to tentatively < 2 W/m at 4.2 K. The magnet design, and the results of preliminary tests on a candidate NbTi-wire for building a model magnet are presented and discussed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4221 EP - 4223 KW - dipole KW - synchrotron KW - experiment KW - superconducting-magnet KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS053 UR - http://jacow.org/ipac2019/papers/thpts053.pdf ER - TY - CONF AU - Xu, Q.J. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - High Field Superconducting Magnet Program for Accelerators in China J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - High field superconducting magnets are crucial for high-energy particle accelerators. IHEP (institute for High Energy Physics, Beijing) is pursuing critical technologies R&D for future circular colliders like the Super Proton Proton Collider (SPPC). SPPC will need thousands of high field (12-20 T) superconducting magnets in around 20 years. A long term R&D roadmap of the advanced high field magnets has been made, aiming to push the technology frontier to the desired level, and a strong domestic collaboration is established, which brings together expertise of Chinese superconductivity community from fields of materials, physics, technology and engineering. The goal is to address prominent scientific and technological issues and challenges for high field applications of advanced superconducting materials. In the past year a model magnet with hybrid coils (NbTi and Nb₃Sn ) has been manufactured and tested, reaching a dipole field above 10 T in the two apertures. A full Nb₃Sn model has also been fabricated and tested with a coil made of iron based superconductor inserted in the center. An overview of the high field magnet program, R&D status and the future plans will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4359 EP - 4360 KW - dipole KW - proton KW - collider KW - superconducting-magnet KW - background DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-FRXXPLM1 UR - http://jacow.org/ipac2019/papers/frxxplm1.pdf ER -