TY - CONF AU - Bettoni, S. AU - Craievich, P. AU - Ferrari, E. AU - Ganter, R. AU - Lutman, A.A. AU - Marcellini, F. AU - Penco, G. AU - Prat, E. AU - Reiche, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Beam Manipulation Using Self-Induced Fields at the SwissFEL Injector J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In the past years wakefield sources have been used to manipulate electron beams in accelerators. We recently installed corrugated structures for a total length of 2~m at the SwissFEL injector to test novel schemes for beam manipulations. We present simulations and early experimental results. We compare the model predictions with the measured data for the bunch energy losses and the kick factor, and show early results for the longitudinal phase space linearization and the production of current spikes. PB - JACoW Publishing CP - Geneva, Switzerland SP - 266 EP - 269 KW - FEL KW - simulation KW - electron KW - experiment KW - wakefield DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW073 UR - http://jacow.org/ipac2019/papers/mopgw073.pdf ER - TY - CONF AU - Fabris, A. AU - Caiazza, D. AU - Castronovo, D. AU - Cautero, M. AU - Cleva, S. AU - De Monte, R. AU - Fabris, R. AU - Ferianis, M. AU - Grulja, S. AU - Gubertini, A. AU - Gucin, T.N. AU - Laghi, R. AU - Loda, G. AU - Pasotti, C. AU - Visintini, R. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - ESS Related Activities at Elettra Sincrotrone Trieste J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions, together with Istituto Nazionale di Fisica Nucleare (INFN) and Consiglio Nazionale delle Ricerche (CNR), committed to the realization of the Italian in-kind contributions for the European Spallation Source. Elettra contributions are concentrated on the proton accelerator and more specifically they concern the construction of the conventional iron-dominated electro-magnets and related power converters to be installed in the superconducting part of the linac and in the High Energy Beam Transport (HEBT), the RF power stations for the superconducting spoke cavity linac section and the wire scanner acquisition system for the beam diagnostics. This paper provides a description of the contributions and an overview of the status of the construction activities. PB - JACoW Publishing CP - Geneva, Switzerland SP - 953 EP - 956 KW - quadrupole KW - linac KW - dipole KW - target KW - MMI DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPTS043 UR - http://jacow.org/ipac2019/papers/mopts043.pdf ER - TY - CONF AU - Cautero, M. AU - Gucin, T.N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Storageless Resonant Converter for Accelerator Magnets J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Elettra Sincrotrone Trieste, a specialized research centre generating high quality synchrotron radiation, has been in operation since 1993 and was revised in 2009. Recently, Elettra has been funded for a complete renewal of the storage ring. For the new machine, it is planned to employ state of the art converters, mostly of which will be designed in-house. For this purpose, it has been decided to evaluate the performance of a storage-less resonant converter, pro-posed by Dr. Slobodan Ćuk, which is a step down DC/DC converter consisting of four switches, one resonant capac-itor and two resonant inductors. For this purpose, the voltage conversion ratio of the converter has been de-rived. The topology was confirmed with simulation and a PCB layout has been designed, which is still to be tested. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1248 EP - 1250 KW - operation KW - resonance KW - controls KW - simulation KW - storage-ring DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP011 UR - http://jacow.org/ipac2019/papers/tupmp011.pdf ER - TY - CONF AU - Visintini, R. AU - Cautero, M. AU - Gucin, T.N. AU - Martins, C.A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Power Converters for the ESS Warm Magnets: Procurement Status J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In the frame of the Italian In-Kind collaboration for the construction of the European Spallation Source (ESS), Elettra Sincrotrone Trieste research center is in charge, among all, of the provision of the power converters for the warm magnets of the superconducting part of the linear accelerator and of the proton beam transport line. The procurement process is running for all types of power converters. The first components have been delivered to ESS already in March 2018, while the Dipole and Quadrupole power converters are under construction. The first batches have been factory tested and shipped to Lund. The corrector power converters have been manufactured and are currently tested and calibrated at Elettra before their delivery to ESS. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1251 EP - 1254 KW - linac KW - dipole KW - status KW - quadrupole KW - neutron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPMP012 UR - http://jacow.org/ipac2019/papers/tupmp012.pdf ER - TY - CONF AU - Karantzoulis, E. AU - Carniel, A. AU - Krecic, S. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Elettra, Present and Future J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The operational status of the Italian 2.4/2.0 GeV third generation light source Elettra is presented together with the final version of the upcoming upgrade, the diffraction limited light source Elettra 2.0. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1468 EP - 1470 KW - dipole KW - emittance KW - operation KW - coupling KW - insertion-device DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW031 UR - http://jacow.org/ipac2019/papers/tupgw031.pdf ER - TY - CONF AU - Allaria, E. AU - Castronovo, D. AU - Cautero, M. AU - Cudin, I. AU - Danailov, M.B. AU - Diviacco, B. AU - Giannessi, L. AU - Veronese, M. AU - Zangrando, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - FERMI Configuration for the Echo Enabled Harmonic Generation Experiment J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The FERMI FEL-2 undulator line, normally operated in the double stage high gain harmonic generation with the fresh bunch (HGHG-FB) has been temporary modified to allow operating the FEL in the Echo Enabled Harmonic Generation (EEHG) scheme. An increase of the dispersion in the delay-line was required together with a replacement of the second stage modulator allowing the electron beam to resonantly interact with a second seed laser. Another critical component of the EEHG setup is a new manipulator installed in the delay-line chicane and hosting additional diagnostic components. In this work we describe in some detail these new components that allowed a successful demonstration of the EEHG at harmonics as high as 101. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1752 EP - 1755 KW - laser KW - FEL KW - electron KW - experiment KW - photon DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB031 UR - http://jacow.org/ipac2019/papers/tuprb031.pdf ER - TY - CONF AU - D'Auria, G. AU - Aicheler, M. AU - Aksoy, A.A. AU - Alesini, D. AU - Apsimon, R. AU - Arnesano, J.M. AU - Bellaveglia, M. AU - Bernhard, A. AU - Bosco, F. AU - Buonomo, B. AU - Burt, G. AU - Calvi, M. AU - Cardelli, F. AU - Castaneda Cortes, H.M. AU - Castilla, A. AU - Clarke, J.A. AU - Croia, M. AU - Cross, A.W. AU - Dattoli, G. AU - Di Mitri, S. AU - Diomede, M. AU - Dowd, R.T. AU - Dunning, D.J. AU - Fang, W.D. AU - Faus-Golfe, A. AU - Ferrario, M. AU - Ficcadenti, L. AU - Gallo, A. AU - Gazis, E.N. AU - Gazis, N. AU - Geometrante, R. AU - Gethmann, J. AU - Giribono, A. AU - Goryashko, V.A. AU - Han, Y. AU - Jacewicz, M. AU - Janssen, X.J.A. AU - Kokole, M. AU - Latina, A. AU - Liu, X. AU - Luiten, O.J. AU - Marcos, J. AU - Marín, E. AU - Mostacci, A. AU - Mutsaers, P.H.A. AU - Muñoz Horta, R. AU - Nguyen, F. AU - Palumbo, L. AU - Petralia, A. AU - Piersanti, L. AU - Priem, J.M.A. AU - Pérez, F. AU - Rochow, R.A. AU - Rossi, C. AU - Ruber, R.J.M.Y. AU - Schmidt, T. AU - Schulte, D. AU - Spataro, B. AU - Stapnes, S. AU - Stragier, X.F.D. AU - Taylor, G. AU - Thompson, N. AU - Vaccarezza, C. AU - Wu, X.W. AU - Wuensch, W. AU - Zhang, K. AU - Zhang, L. AU - Zhu, D. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The CompactLight Design Study Project J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint,  as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1756 EP - 1759 KW - FEL KW - linac KW - electron KW - undulator KW - brightness DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB032 UR - http://jacow.org/ipac2019/papers/tuprb032.pdf ER - TY - CONF AU - Diviacco, B. AU - Bracco, R. AU - Millo, D. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Fixed-gap Undulators for Elettra and FERMI J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In the context of an R&D program on alternative undulator schemes, two fixed-gap, linearly polarised, adjustable-phase undulators (APUs) were built and successfully tested, the first on the FERMI free electron laser, the second on the Elettra storage ring. The latter is now in regular operation for the ALOISA surface science beam line. As a further elaboration on the fixed-gap concept, two elliptically polarised undulators (EPUs) are now being developed for FERMI and for Elettra. We have also started the construction of a double period APU providing an extended tuning range to the TwinMic soft X-Ray microscopy beam line. We present here the main design and construction aspects of the new undulators under development. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1760 EP - 1762 KW - undulator KW - polarization KW - electron KW - FEL KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB033 UR - http://jacow.org/ipac2019/papers/tuprb033.pdf ER - TY - CONF AU - Pop, M.A. AU - Allaria, E. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A Peak Finding Algorithm for FEL Spectra Characterization J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - We present a software tool aimed at investigating the spectra of photon sources in order to detect any instabilities in the electron beam that have a clear effect on the spectrum. The method has been developed for FERMI@Elettra but with a general approach on the particularities of FEL machines such as a high repetition frequency and significant shot to shot fluctuations. The software has two operating options: a mode, aimed at online usage, which only detects peaks and their corresponding valleys, offering no information about the peaks themselves; and a more comprehensive mode that fits peak functions (Gaussian, Lorentzian etc…) to the spectrum based on initial guesses of the fitting parameters. The algorithm can provide a collection of simple but valuable variables such as number of peaks, peak separation and ratio between peak heights, as well as more specialized variables like peak width statistics and decomposition of the raw spectrum in basic components. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1827 EP - 1829 KW - FEL KW - electron KW - bunching KW - laser KW - background DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB070 UR - http://jacow.org/ipac2019/papers/tuprb070.pdf ER - TY - CONF AU - Marín, E. AU - Aksoy, A.A. AU - Di Mitri, S. AU - Latina, A. AU - Muñoz Horta, R. AU - Pérez, F. AU - van der Geer, S.B. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Start-to-End Simulations of the Compact Light Project Based on an S-Band Injector and an X-Band LINAC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In this paper we report the start-to-end simulation results of one of the options under consideration for the CompactLight Project (XLS). The XLS is a hard X-ray Free Electron Laser under design, using the latest concepts for bright electron photo injectors, very high-gradient X-band structures, and innovative short-period undulators. Presently there exist various tracking codes to conduct the design process. Therefore identifying the most convenient code is of notable importance. This paper compares the tracking codes, Placet and General Particle Tracer, using the XLS lattice based on a S and X-band Injector. The calculation results in terms of beam quality and tracking performance of a full 6-D simulation are presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1836 EP - 1839 KW - lattice KW - linac KW - FEL KW - cavity KW - electron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPRB074 UR - http://jacow.org/ipac2019/papers/tuprb074.pdf ER - TY - CONF AU - Allaria, E. AU - Badano, L. AU - De Ninno, G. AU - Di Mitri, S. AU - Diviacco, B. AU - Fawley, W.M. AU - Ferrari, E. AU - Garzella, D. AU - Grattoni, V. AU - Hemsing, E. AU - Mirian, N.S. AU - Penco, G. AU - Pop, M.A. AU - Prat, E. AU - Rebernik Ribič, P. AU - Roussel, E. AU - Spampinati, S. AU - Spezzani, C. AU - Trovò, M. AU - Xiang, D. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Amplified Emission of a Soft-X Ray Free-Electron Laser Based on Echo-Enabled Harmonic Generation J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - We report the first evidence of substantial gain in a soft-X ray Free Electron Laser (FEL) based on Echo-Enabled Harmonic Generation (EEHG). The experiment was focused on harmonics 36 (~7.3nm) and 45 (5.8 nm) and clearly demonstrated the expected EEHG capability of generating powerful and coherent FEL pulses, with strongly reduced sensitivity to electron-beam fluctuations. The experiment was carried out at FERMI, the seeded FEL user facility at Elettra-Sincrotrone Trieste. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2230 EP - 2232 KW - FEL KW - laser KW - electron KW - experiment KW - free-electron-laser DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEXXPLM1 UR - http://jacow.org/ipac2019/papers/wexxplm1.pdf ER - TY - CONF AU - Leban, P. AU - Bassanese, S. AU - Brajnik, G. AU - De Monte, R. AU - Žnidarčič, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Evaluation of a New 500 MHz Digitizer at Elettra and Fermi J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A new digitizer was evaluated in ELETTRA storage ring and FERMI linear accelerator. The A/D conversion is done with 14-bits at 500 MS/s. The sampling clock is hard-locked to the Master Oscillator and has a jitter of a maximum 10 ps. The AC coupled version has an analog bandwidth up to 2 GHz and was used to measure the fill pattern. The bunch flat-top is very narrow (10⁻¹⁵ ps). To reach better stability, various external filtering components were used. Bunch-by-bunch beam position was calculated offline and compared to a standard BPM electronics. The DC coupled version was used to sample pulses from the fast current transformer at FERMI. A software interface can configure data acquisition length and fill buffer segments with pre-defined number of triggers. Native TANGO and EPICS interfaces allow for fast integration with CSS and other display tools. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2635 EP - 2637 KW - pick-up KW - interface KW - insertion KW - storage-ring KW - EPICS DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW071 UR - http://jacow.org/ipac2019/papers/wepgw071.pdf ER - TY - CONF AU - Leban, P. AU - Brajnik, G. AU - De Monte, R. AU - Žnidarčič, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Evaluation of Pilot-Tone Calibration Based BPM System at Elettra Sincrotrone Trieste J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Stable and reliable beam position measurement is of paramount importance for the present and future light sources. Stabilization with a pilot-tone technique was developed by Elettra Sincrotrone Trieste and supported in the commercial BPM electronics Libera Spark. Both system components (the pilot-tone front-end and BPM electronics) are controlled through a common software interface which is compatible with TANGO, EPICS and LabVIEW/MATLAB clients. The system provides a reliable self-diagnostics, cable and button diagnostics and drift compensation. This paper presents results from beam measurements under different environmental and beam conditions. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2638 EP - 2640 KW - electronics KW - electron KW - FPGA KW - injection KW - diagnostics DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW072 UR - http://jacow.org/ipac2019/papers/wepgw072.pdf ER - TY - CONF AU - Shafqat, N. AU - Bopp, M. AU - Giannessi, L. AU - Lucas, T.G. AU - Masciovecchio, C. AU - Milloch, M. AU - Serpico, C. AU - Svandrlik, M. AU - Trovò, M. AU - Zennaro, R. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Commissioning of S-band Cavity Test Facility at Elettra for Conditioning of High Gradient Structures for the Fermi Linac Upgrade J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - FERMI is the seeded Free Electron Laser (FEL) user facility at Elettra laboratory in Trieste, operating in the VUV to soft X-rays spectral range. In order to extend the FEL spectral range to shorter wavelengths, a feasibility study for increasing the Linac energy from 1.5 GeV to 1.8 GeV is actually going on. A short prototype of a new High Gradient (HG) S-band accelerating structure has been built in collaboration with Paul Scherrer Institute (PSI). The new structures are intended to replace the present Backward Travelling Wave (BTW) sections and tailored to be operated at a gradient of 30 MV/m. For RF conditioning and high power testing of prototype, a Cavity Test Facility (CTF) is commissioned at FERMI. The test facility is equipped with RF pulse compressor system and a dedicated diagnostic for breakdown rate (BDR) measurements and events localization. In this paper we present in detail cavity test facility of FERMI and high power testing of the first prototype. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2846 EP - 2848 KW - cavity KW - LLRF KW - FEL KW - hardware KW - linac DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB021 UR - http://jacow.org/ipac2019/papers/weprb021.pdf ER - TY - CONF AU - Pasotti, C. AU - Bocciai, M. AU - Rinaldi, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - RF System Upgrade for Elettra 2.0 J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The Elettra 2.0 low emittance light source project has triggered the review of the installed RF system’s performances and the analyses of the new machine requirement. This study includes the imperative revamp of the RF power sources. The trade off between the best theoretical RF system design and the available room for installation and budget for Elettra 2.0 has been translated into the operational plan reported here. The first planned step is the installation of 100 kW 500 MHz solid state based transmitters. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2849 EP - 2851 KW - cavity KW - storage-ring KW - HOM KW - LLRF KW - klystron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB022 UR - http://jacow.org/ipac2019/papers/weprb022.pdf ER - TY - CONF AU - del Pozo Romano, V. AU - Bursali, H. AU - Catalán Lasheras, N. AU - Grudiev, A. AU - Pitman, S. AU - Serpico, C. AU - Syratchev, I. AU - Volpi, M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - High Power Conditioning of X-Band Variable Power Splitter and Phase Shifter J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The three X-band test facilities currently at CERN aim at qualifying CLIC structures prototypes but are also exten- sively used to qualify X-band components operation at high power. In order to upgrade one of the facilities from a single test line to a double test line facility, a high power variable splitter and variable phase shifter have been designed and manufactured at CERN. They have been power tested, first in a dedicated test and also in their final configuration, to en- sure stable power operation before installing them together with an accelerating structure. In this paper, we broadly describe the RF and mechanical design, manufacturing and low power measurements agreement with simulations. We report the high power qualification of both components and their suitability to be used in existing and planned X-band facilities. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2964 EP - 2967 KW - simulation KW - klystron KW - GUI KW - ISOL KW - operation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB064 UR - http://jacow.org/ipac2019/papers/weprb064.pdf ER - TY - CONF AU - Castronovo, D. AU - Caiazza, D. AU - Fabris, A. AU - Fabris, R. AU - Gubertini, A. AU - Loda, G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - ESS Magnets at Elettra Sincrotrone Trieste J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Elettra Sincrotrone Trieste Research Center (Elettra) is one the Italian Institutions committed to the realization of the Italian in-kind contributions for the European Spallation Source. One of these consists in the supply of several conventional iron dominated electro-magnets to be installed in the superconducting part of the linac and in the transfer lines. The total number of magnets amounts to 2 dipoles, 139 quadrupoles, of four different families, and 72 correctors, of three different types. This document reports all related magnetic design and optimisations carried out to meet the required specifications and on the status of production and testing. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4148 EP - 4151 KW - quadrupole KW - ion-source KW - MMI KW - framework KW - vacuum DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS020 UR - http://jacow.org/ipac2019/papers/thpts020.pdf ER - TY - CONF AU - Castronovo, D. AU - Karantzoulis, E. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Magnets for Elettra 2.0 J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - After 25 years of faithfully serving the user community with excellent results, Elettra need a major upgrade with a new compact latice that will replace the existing double bend achromat for the reducing of the horizontal emittance and the increasing of the brilliance and coherence of the X-ray beam. This paper report the magnetic design development and optimisations carried out in order to satisfy the layout feasibility and the magnet strengths. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4152 EP - 4154 KW - quadrupole KW - sextupole KW - optics KW - ion-effects KW - lattice DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS021 UR - http://jacow.org/ipac2019/papers/thpts021.pdf ER - TY - CONF AU - Pasotti, C. AU - Cautero, M. AU - Gucin, T.N. AU - Martins, C.A. AU - Yogi, R.A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Radio Frequency Power Stations for ESS LINAC Spoke Section J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - 26 equivalent 400 kW Radio Frequency Power Station (RFPS) units will be provided by Elettra as part of the Italian in kind contribution to ESS. They will be installed in the LINAC "Spoke Section". Each RFPS will power a single superconducting spoke cavity in pulsed operation at 352.21 MHz. The RFPS is a complete system that operates unmanned, based on a combination of solid state and tetrode amplification’s stages. The tender specification, the RFPS main features and requested performances are reported here. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4346 EP - 4348 KW - operation KW - controls KW - power-supply KW - cavity KW - site DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS102 UR - http://jacow.org/ipac2019/papers/thpts102.pdf ER -