TY  - CONF
AU  - Roth, I.
AU  - Gaudreau, M.P.J.
AU  - Kempkes, M.K.
AU  - Silverman, N.
AU  - Simpson, R.E.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - ESS Klystron Production Test Stand
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - Diversified Technologies, Inc. (DTI) has delivered a new long-pulse modulator klystron test stand to Communication and Power Industries (CPI) in Palo Alto, CA for full power testing of production VKP-8292A klystrons for the European Spallation Source (ESS). This test stand was built using hardware and designs from an earlier SBIR effort for the US Department of Energy, with modifications to support ESS requirements and klystron testing operation. Earlier versions of this design are in use at IPN Orsay and CEA Saclay in France to test RF components for ESS. This new klystron test stand allows testing of klystrons at the full ESS specifications: 100 kV, 50 A, 3.5 ms pulse, 14 Hz,. This design is based on a (patent pending) non-dissipative regulator that compensates for the capacitor droop voltage (~20%) during the pulse. This allows a much smaller capacitor than would nominally be required for the long ESS pulse, eliminating the need for larger, more expensive capacitor bank. This test stand will speed delivery of ESS klystrons, and similar, long pulse, high power klystrons at CPI.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 4074
EP  - 4075
KW  - klystron
KW  - high-voltage
KW  - controls
KW  - power-supply
KW  - cathode
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-THPRB105
UR  - http://jacow.org/ipac2019/papers/thprb105.pdf
ER  - 

TY  - CONF
AU  - Gaudreau, M.P.J.
AU  - Cope, D.B.
AU  - Johnson, E.G.
AU  - Kempkes, M.K.
AU  - Simpson, R.E.
AU  - Stuart, N.A.
ED  - Boland, Mark
ED  - Tanaka, Hitoshi
ED  - Button, David
ED  - Dowd, Rohan
ED  - Schaa, Volker RW
ED  - Tan, Eugene
TI  - High Efficiency High Power Resonant Cavity Amplifier For PIP-II
J2  - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019
CY  - Melbourne, Australia
T2  - International Particle Accelerator Conference
T3  - 10
LA  - english
AB  - Diversified Technologies, Inc. (DTI) is developing an integrated resonant-cavity combined solid-state amplifier for the Proton Improvement Plan-II (PIP-II) at Fermilab. The prototype has demonstrated multiple-transistor combining at 70% efficiency, at 675 watts per transistor at 650 MHz. The patent pending design simplifies solid-state transmitters to create straightforward scaling to 200 kW and higher high power levels. A crucial innovation is the reliable "soft-failure" mode of operation; a failure in one or more of the transistors has negligible performance impact. This design couples the transistor drains directly to the cavity without first transforming to 50 Ohms, avoiding the circulators, cables, and connectors that would normally be required. Under an ongoing SBIR grant from the US Department of Energy, DTI designed the system to accommodate over 96 transistors in each 50 kW cavity, with minimal RF, DC, and cooling connections. By the end of the SBIR, DTI will build and demonstrate a complete 100 kW-class (~200 kW) transmitter by combining four cavity modules to show the expandability of the design to very high power levels, comparable to large VEDs.
PB  - JACoW Publishing
CP  - Geneva, Switzerland
SP  - 4335
EP  - 4337
KW  - cavity
KW  - coupling
KW  - impedance
KW  - network
KW  - operation
DA  - 2019/06
PY  - 2019
SN  - 978-3-95450-208-0
DO  - DOI: 10.18429/JACoW-IPAC2019-THPTS095
UR  - http://jacow.org/ipac2019/papers/thpts095.pdf
ER  -