TY - CONF AU - Maniscalco, J.T. AU - Arias, T. AU - Liarte, D. AU - Liepe, M. AU - Sethna, J.P. AU - Sitaraman, N. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The surface resistance of an SRF cavity is an important measure of its performance and utility: lower resistance leads directly to lower cryogenic losses and power consumption. This surface resistance comprises two components, namely the ‘‘BCS resistance’’, which depends strongly on the quasiparticle temperature, and a temperature-independent ‘‘residual resistance’’, which is often dominated by losses due to trapped magnetic vortices. Both components are generally dependent on the RF field strength. Here we present a summary of recent theoretical advances in understanding the microscopic mechanisms of the surface resistance, in particular addressing niobium hydride formation and quasiparticle overheating (using the tools of density functional theory) and discussing issues with existing models of the positive Q-slope, a field-dependent decrease in the BCS resistance, and possible paths for improvement of these models. We also discuss trapped flux losses using ideas from collective weak pinning theory. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3020 EP - 3023 KW - cavity KW - SRF KW - niobium KW - electron KW - experiment DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPRB089 UR - http://jacow.org/ipac2019/papers/weprb089.pdf ER - TY - CONF AU - Gordon, M.A. AU - Kim, Y.K. AU - Maxson, J.M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - As we move to ultra-high brightness photocathodes and ultra-cold beams, we may become more sensitive to stochastic, point-to point effects such as disorder induced heating and the Boersch effect, given the failure of Debye screening.  In this study, we explore the effects of stochastic scattering. Modern beam dynamics codes often approximate point to point interactions with a potential created by smoothing the charge over space, removing sensitivity to stochastic effects. This approximation is often used in beamline optimization, because it is much faster. We study the limits of validity of this approximation. In particular, we will simulate effects of stochastic space charge on a high brightness photoemission beamline, an ultrafast electron diffraction beamline with a photocathode temperature of 5 meV with a final beam energy of 225 keV. Emittance dilution in the transverse plane and transverse beam size relative to smooth space charge simulations will be presented. PB - JACoW Publishing CP - Geneva, Switzerland SP - 3283 EP - 3285 KW - space-charge KW - simulation KW - electron KW - emittance KW - cathode DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPTS069 UR - http://jacow.org/ipac2019/papers/wepts069.pdf ER - TY - CONF AU - Duncan, C.J.R. AU - Andorf, M.B. AU - Bazarov, I.V. AU - Gulliford, C.M. AU - Khachatryan, V. AU - Maxson, J.M. AU - Rubin, D.L. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - A Generic Software Platform for Rapid Prototyping of Online Control Algorithms J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Algorithmic control of accelerators is an active area of research that promises significant improvements in machine performance. To facilitate rapid algorithm prototyping, we have developed a generic interface between accelerator controls, beam physics modelling software and modern scripting languages. The work-flow of a project using this interface begins with testing algorithms of choice offline in simulation. After off-line testing, the same code can be deployed on real machines via the Experimental Physics and Industrial Control System (EPICS) API. We include noise in our simulations in order to mimic realistic accelerator behaviour and to evaluate robustness of algorithms to experimental uncertainties and long-term drifts. The results of test cases of using this framework are presented, including emittance tuning of the Cornell Electron Storage Ring (CESR), correction of diurnal drift in CESR steering and orbit correction on CESR and the Cornell-BNL ERL Test Accelerator (CBETA). PB - JACoW Publishing CP - Geneva, Switzerland SP - 4063 EP - 4065 KW - simulation KW - controls KW - software KW - interface KW - EPICS DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPRB100 UR - http://jacow.org/ipac2019/papers/thprb100.pdf ER -