TY - CONF AU - Bogomyagkov, A.V. AU - Glukhov, S.A. AU - Levichev, E.B. AU - Sinyatkin, S.V. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Dynamic Aperture Limitation in e⁺ e⁻ Colliders due to Synchrotron Radiation in Quadrupoles J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - In a lepton storage ring of very high energy (e.g. in the e⁺e⁻ Higgs factory) synchrotron radiation from quadrupoles constrains transverse dynamic aperture even in the absence of any magnetic nonlinearities. This was observed in tracking for LEP and the Future Circular e⁺e⁻ Collider (FCC-ee). Synchrotron radiation in the quadrupoles modulates the particle energy at the double betatron frequency. Energy modulation varies transverse focusing strength at the same frequency and creates a parametric resonance of the betatron oscillations with unusual properties. It occurs at arbitrary betatron frequency and the magnitude of the parameter modulation of the betatron oscillation depends on the oscillation amplitude. Equilibrium between the radiation damping and the resonant excitation gives the boundary of the stable motion. Here we continue comparison of tracking results with analytical calculations of the parametric resonance. PB - JACoW Publishing CP - Geneva, Switzerland SP - 221 EP - 224 KW - quadrupole KW - radiation KW - synchrotron KW - betatron KW - synchrotron-radiation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPGW059 UR - http://jacow.org/ipac2019/papers/mopgw059.pdf ER - TY - CONF AU - Ogur, S. AU - Barnyakov, A.M. AU - Chaikovska, I. AU - Chehab, R. AU - Furukawa, K. AU - Iida, N. AU - Kamitani, T. AU - Levichev, A.E. AU - Martyshkin, P.V. AU - Miyahara, F. AU - Nikiforov, D.A. AU - Oide, K. AU - Ozcan, E.V. AU - Papaphilippou, Y. AU - Polozov, S.M. AU - Rinolfi, L. AU - Yaman, F. AU - Zimmermann, F. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Linac and Damping Ring Designs for the FCC-ee J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - We report the design of the pre-injector chain for the Future Circular e⁺ e⁻ Collider (FCC-ee) system. The electron beam from a low-emittance RF gun is accelerated by an S-band linac up to 6 GeV. A damping ring at 1.54 GeV is required for emittance cooling of the positron beam. The intermediate energy step from the exit of the S-band linac at 6 GeV to the 20 GeV injection energy of the top-up booster can be provided by the modified Super Proton Synchrotron (SPS), serving as a pre-booster ring (PBR). An alternative option to reach 20 GeV energy would be to extend the S-band linac with a C- or X-band linac. An overall cost optimisation will determine the choice of the final configuration. Beam loss and emittance dilution in the linac due to space charge effects, wakefields, and misalignment of accelerator components can be mitigated by RF phasing and orbit steering. Start-to-end simulations examine the beam transport through the linac up to either 6 GeV or 20 GeV. The results indicate large design margins. Simulations of the beam dynamics in the damping ring (DR) demonstrate a sufficiently large momentum acceptance. Effects of intrabeam scattering and electron cloud instability in the DR are also studied. PB - JACoW Publishing CP - Geneva, Switzerland SP - 420 EP - 423 KW - linac KW - emittance KW - positron KW - gun KW - electron DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPMP002 UR - http://jacow.org/ipac2019/papers/mopmp002.pdf ER - TY - CONF AU - Chaikovska, I. AU - Apyan, A. AU - Chehab, R. AU - Enomoto, Y. AU - Faus-Golfe, A. AU - Furukawa, K. AU - Han, Y. AU - Kamitani, T. AU - Martyshkin, P.V. AU - Miyahara, F. AU - Ogur, S. AU - Oide, K. AU - Papaphilippou, Y. AU - Rinolfi, L. AU - Satoh, M. AU - Seimiya, Y. AU - Sievers, P. AU - Suwada, T. AU - Zimmermann, F. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Positron Source for FCC-ee J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The FCC-ee is a high-luminosity, high-precision circular collider to be constructed in a new 100 km tunnel in the Geneva area. The physics case is well established and the FCC-ee operation is foreseen at 91 GeV (Z-pole), 160 GeV (W pair production threshold), 240 GeV (Higgs resonance) and 365 GeV (t-tbar threshold). Due to the large 6D production emittance and important thermal load in the production target, the positron injector, in particular the positron source, is one of the key elements of the FCC-ee, requiring special attention. To ensure high reliability of the positron source, conventional and hybrid targets are currently under study. The final choice of the positron target will be made based on the estimated performances. In this framework, we present a preliminary design of the FCC-ee positron source, with detailed simulation studies of positron production, capture and primary acceleration. PB - JACoW Publishing CP - Geneva, Switzerland SP - 424 EP - 427 KW - positron KW - target KW - linac KW - electron KW - collider DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPMP003 UR - http://jacow.org/ipac2019/papers/mopmp003.pdf ER - TY - CONF AU - Syresin, E. AU - Eliseev, A.V. AU - Mityanina, N.V. AU - Petrov, V.M. AU - Rotov, E. AU - Smirnov, A.V. AU - Tribendis, A.G. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Longitudinal Particle Dynamics in NICA Collider J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A specific feature of the NICA acceleration complex is high luminosity of colliding beams. Three types of RF stations will be used in the NICA Collider to reach the necessary beam parameters. The first one is for accumulation of particles in the longitudinal phase space with the moving burrier buckets under action of stochastic and/or electron cooling systems. The second and third RF stations are for formation of the final bunch size in the colliding regime. This report presents numerical simulations of longitudinal beam dynamics which taken into account the longitudinal space charge effect during the accumulation and bunching procedures. Influence of space effects leads to some decrease in the accumulation efficiency and requires special manipulation with the 2nd and 3rd RF stations during the adiabatic capture and bunching procedures. PB - JACoW Publishing CP - Geneva, Switzerland SP - 455 EP - 457 KW - bunching KW - collider KW - injection KW - accumulation KW - acceleration DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-MOPMP015 UR - http://jacow.org/ipac2019/papers/mopmp015.pdf ER - TY - CONF AU - Kaabi, W. AU - Angal-Kalinin, D. AU - Bogacz, S.A. AU - Bousson, S. AU - Brüning, O.S. AU - Calaga, R. AU - Chaikovska, I. AU - Dassa, L. AU - Gerigk, F. AU - Hounsell, B. AU - Hutton, A. AU - Jensen, E. AU - Klein, M. AU - Levichev, E.B. AU - Longuevergne, D. AU - Marhauser, F. AU - McKenzie, J.W. AU - Militsyn, B.L. AU - Olivier, G. AU - Olry, G. AU - Pupkov, Yu.A. AU - Rimmer, R.A. AU - Stocchi, A. AU - Tennant, C. AU - Thonet, P.A. AU - Vallerand, C. AU - Welsch, C.P. AU - Williams, P.H. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - PERLE: A High Power Energy Recovery Facility J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - PERLE is a proposed high power Energy Recovery Linac, designed on multi-turn configuration, based on SRF technology, to be hosted at Orsay-France in a col-laborative effort between local laboratories: LAL and IPNO, together with an international collaboration involv-ing today: CERN, JLAB, STFC ASTeC Daresbury, Liverpool University and BINP Novosibirsk. PERLE will be a unique leading edge facility designed to push advances in accelerator technology, to provide intense and highly flexible test beams for component development. In its final configuration, PERLE provides a 500 MeV elec-tron beam using high current (20 mA) acceleration during three passes through 801.6 MHz cavities. This presenta-tion outlines the technological choices, the lattice design and the main component descriptions. PB - JACoW Publishing CP - Geneva, Switzerland SP - 1396 EP - 1399 KW - cavity KW - linac KW - cryomodule KW - injection KW - gun DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-TUPGW008 UR - http://jacow.org/ipac2019/papers/tupgw008.pdf ER - TY - CONF AU - Sterbini, G. AU - Amorim, D. AU - Bartosik, H. AU - Bertarelli, A. AU - Bruce, R. AU - Buffat, X. AU - Carra, F. AU - Carver, L.R. AU - Cattenoz, G. AU - Effinger, E. AU - Fartoukh, S.D. AU - Fitterer, M. AU - Fuster-Martínez, N. AU - Gonzalez-Berges, M. AU - Gorzawski, A.A. AU - Gąsior, M. AU - Hemelsoet, G.H. AU - Hostettler, M. AU - Iadarola, G. AU - Jones, O.R. AU - Kaltchev, D. AU - Karastathis, N. AU - Kostoglou, S. AU - Lamas Garcia, I. AU - Levens, T.E. AU - Levichev, A.E. AU - Medina Medrano, L.E. AU - Mirarchi, D. AU - Olexa, J. AU - Papadopoulou, S. AU - Papaphilippou, Y. AU - Pellegrini, D. AU - Pojer, M. AU - Ponce, L. AU - Poyet, A. AU - Redaelli, S. AU - Rossi, A. AU - Salvachua, B. AU - Schmickler, H. AU - Schmidt, F. AU - Skoufaris, K. AU - Solfaroli, M. AU - Tomás, R. AU - Trad, G. AU - Valishev, A. AU - Valuch, D. AU - Xu, C. AU - Zamantzas, C. AU - Zisopoulos, P. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2262 EP - 2265 KW - experiment KW - beam-beam-effects KW - operation KW - collider KW - simulation DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEYYPLM3 UR - http://jacow.org/ipac2019/papers/weyyplm3.pdf ER - TY - CONF AU - Borin, V.M. AU - Dorokhov, V.L. AU - Karpov, G.V. AU - Meshkov, O.I. AU - Shatilov, D.N. AU - Shwartz, D.B. AU - Timoshenko, M.V. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - The Study of Beam-Beam Effects on BINP Electron-Positron Colliders J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - The beam-beam effects depending on the beams current and energy were studied at electron-positron colliders VEPP-2000 and VEPP-4M by the set of different diagnostics: the streak camera, optical dissector, BPM. The beam transverse profiles as well as longitudinal motion were acquired from the moment of a first collision of the beams in the interaction point up to the establishment of an equilibrium state. The spectra of the beams oscillation during this process as well as influence of the transverse feedback were studied. The obtained results are compared with a numerical simulations and discussed. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2629 EP - 2631 KW - electron KW - injection KW - positron KW - detector KW - luminosity DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW067 UR - http://jacow.org/ipac2019/papers/wepgw067.pdf ER - TY - CONF AU - Borin, V.M. AU - Dorokhov, V.L. AU - Getmanov, Ya.V. AU - Matveev, A.S. AU - Meshkov, O.I. AU - Mickailov, A.I. AU - Shevchenko, O.A. AU - Vinokurov, N.A. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - Measurements of Beam Parameters at the Last Track of the ERL-Based Novosibirsk Free Electron Laser J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - Parameters and dynamics of the electron beam of the Novosibirsk infrared Free Electron Laser are studied. The Novosibirsk FEL is based on the multi-turn energy recovery linac (ERL). The ERL operate in CW mode with an average beam current about 5 mA. Therefore non-destructive beam diagnostic methods are preferable. The beam energy at the last track of the ERL is 42 MeV. As a result, significant part of synchrotron radiation from bending magnets is in the visible range and can be used for diagnostic purposes. The transverse beam dimensions were measured with the optical diagnostics before (transition radiation) and after (synchrotron radiation from a bending magnet) the undulator applied for generation of middle-infrared coherent radiation. The obtained data are used to calculate the beam energy distribution and emittance. PB - JACoW Publishing CP - Geneva, Switzerland SP - 2632 EP - 2634 KW - FEL KW - radiation KW - electron KW - diagnostics KW - undulator DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-WEPGW068 UR - http://jacow.org/ipac2019/papers/wepgw068.pdf ER - TY - CONF AU - Sharma, S.K. AU - Mezentsev, N.A. AU - Shaftan, T.V. AU - Smaluk, V.V. AU - Spataro, C.J. AU - Tanabe, T. AU - Wang, G.M. ED - Boland, Mark ED - Tanaka, Hitoshi ED - Button, David ED - Dowd, Rohan ED - Schaa, Volker RW ED - Tan, Eugene TI - High Gradient Quadrupoles for Low Emittance Synchrtrons J2 - Proc. of IPAC2019, Melbourne, Australia, 19-24 May 2019 CY - Melbourne, Australia T2 - International Particle Accelerator Conference T3 - 10 LA - english AB - A new lattice design has been proposed recently based on a Complex-Bend concept [1,2] for low emittance syn-chrotrons. The dipoles of a standard DBA lattice are replaced in the Complex Bend by high-gradient (~ 450 T/m) quadrupoles interleaved between discrete dipoles. In another version of the Complex Bend [3] the high gradient quadrupoles are displaced transversely along the beam trajectory to generate the required dipole field. In the latter version the quadrupole strength is reduced to ~ 250 T/m for a lattice that will conform to the layout of the existing NSLS-II 3-GeV storage ring. In this paper we present conceptual designs of a Halbach permanent-magnet (PM) quadrupole, a hybrid PM quadrupole, and a superconducting quadrupole, that can produce the de-sired quadrupole strengths for the Complex Bend appli-cation. REFERENCES [1] T. Shaftan, V. Smaluk and G. Wang, ’The Concept of Com-plex Bend’, NSLS-II Tech note No. 276, Jan 2018. [2] G. Wang et al., ’Complex Bend: Strong-focusing magnet for low emittance synchrotrons’, Physical Review Accelerators and Beams, 21, 100703 (2018). [3] G. Wang et al., ’Complex Bend II’, paper submitted to Physi-cal Review Accelerators and Beams. PB - JACoW Publishing CP - Geneva, Switzerland SP - 4332 EP - 4334 KW - quadrupole KW - dipole KW - focusing KW - vacuum KW - lattice DA - 2019/06 PY - 2019 SN - 978-3-95450-208-0 DO - DOI: 10.18429/JACoW-IPAC2019-THPTS094 UR - http://jacow.org/ipac2019/papers/thpts094.pdf ER -