| Title |
Multi-Ribbon Profile Monitor for High Power Proton Beam at J-PARC MR Abort Line |
| Authors |
- K. Sato
The University of Tokyo, Graduate School of Science, Tokyo, Japan
- E. Hamada, Y. Hashimoto, S. Igarashi, T. Koseki, Y. Sato
KEK, Tsukuba, Japan
|
| Abstract |
Japan Proton Accelerator Research Complex (J-PARC) Main Ring (MR), the world-class high intensity proton synchrotron, provides proton beam to two experimental facilities with two extraction modes: Fast extraction (FX) and Slow extraction (SX). The number of protons per pulse (ppp) in MR recorded the world highest value of 2.6×10¹⁴ in the FX mode. Now we are planning to increase the ppp further up to 3.3×10¹⁴ in near future. The beam profile is one of the most important parameters to discuss the high intensity beam dynamics in MR. Monitors using multi-wires / ribbons are effective to measure the beam profile with good accuracy and wide dynamic range. However, they cause significant beam losses by interactions with high-intensity circulating beam in synchrotrons. Recently, we installed new multi-ribbon profile monitor (MRPM) in an abort line in MR. The abort line is one of the extracted beam lines of the FX system. It has a quadrupole doublet which is called Abort Q and transports extracted beam to a beam dump. The FX system can extract the circulating beam in MR with an arbitrary energy. Performing the single-pass measurement with MRPM and changing the transfer matrix by sweeping field strength of Abort Q, the emittance of the extracted beam can be measured. In this paper, we present the design, manufacturing, and results of the first beam test of newly installed MRPM system.
|
| Paper |
download WEPGW039.PDF [2.475 MB / 3 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2019 |
| Series |
International Particle Accelerator Conference (10th) |
| Location |
Melbourne, Australia |
| Date |
19-24 May 2019 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Mark Boland (UoM, Saskatoon, SK, Canada); Hitoshi Tanaka (KEK, Tsukuba, Japan); David Button (ANSTO, Kirrawee, NSW, Australia); Rohan Dowd (ANSTO, Kirrawee, NSW, Australia); Volker RW Schaa (GSI, Darmstadt, Germany); Eugene Tan (ANSTO, Kirrawee, NSW, Australia) |
| Online ISBN |
978-3-95450-208-0 |
| Received |
01 May 2019 |
| Accepted |
23 May 2019 |
| Issue Date |
21 June 2019 |
| DOI |
doi:10.18429/JACoW-IPAC2019-WEPGW039 |
| Pages |
2561-2563 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
