| Title |
Design and Progress of Mechanical Support in HEPS |
| Authors |
- C.H. Li, Y. Jiaopresenter, M.X. Li, H. Wang, Z. Wang, L. Wu, N. Zhou
IHEP, Beijing, People’s Republic of China
|
| Abstract |
HEPS is a new generation synchrotron facility on construction with very low emittance. Stringent requirements are proposed to the design of mechanical support. The alignment error between girders should be less than 50μm. Based on that, the adjusting resolution of the girder are required to be less than 5μm in both transverse and vertical directions. Besides, the Eigen frequency of magnet & girder assembly should be higher than 54Hz to avoid the amplification of ground vibrations. To fulfill these requirements, studies on mechanical support design is now being carried out in HEPS. This paper will describe the design and progress of those work.
|
| Paper |
download THPTS034.PDF [1.708 MB / 3 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2019 |
| Series |
International Particle Accelerator Conference (10th) |
| Location |
Melbourne, Australia |
| Date |
19-24 May 2019 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Mark Boland (UoM, Saskatoon, SK, Canada); Hitoshi Tanaka (KEK, Tsukuba, Japan); David Button (ANSTO, Kirrawee, NSW, Australia); Rohan Dowd (ANSTO, Kirrawee, NSW, Australia); Volker RW Schaa (GSI, Darmstadt, Germany); Eugene Tan (ANSTO, Kirrawee, NSW, Australia) |
| Online ISBN |
978-3-95450-208-0 |
| Received |
14 May 2019 |
| Accepted |
23 May 2019 |
| Issue Date |
21 June 2019 |
| DOI |
doi:10.18429/JACoW-IPAC2019-THPTS034 |
| Pages |
4180-4182 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
