| Title |
Status and Installation Plan of RISP RFQ at Project Site |
| Authors |
- B.-S. Park, I.S. Hong
IBS, Daejeon, Republic of Korea
|
| Abstract |
The Rare Isotope Science Project (RISP) at Institute for Basic Science (IBS) has been developed a Radio Frequency Quadrupole(RFQ), which was fabricated and commissioned at the off-site test facility. An O+7 beam was accelerated from 10keV/u to 516keV/u as a preliminary beam test. For CW and high power operation, RF conditioning test was also conducted. The RISP RFQ is 5 meters long, 1 meter in diameter and weighs about 16 tons. It was disassembled and transported to the project site, Sin-dong, for installation as the injector system. The installation commenced in April 2019 and the commissioning of the injector system is expected to begin in early 2020. In this paper, the installation status and plans were summarized.
|
| Funding |
Supported by the Rare Isotope Science Project of Institute for Basic Science funded by the Ministry of Science, ICT (MSIP) and the National Research Foundation (NRF) of Korea (2013M7A1A1075764). |
| Paper |
download MOPTS080.PDF [1.040 MB / 3 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2019 |
| Series |
International Particle Accelerator Conference (10th) |
| Location |
Melbourne, Australia |
| Date |
19-24 May 2019 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Mark Boland (UoM, Saskatoon, SK, Canada); Hitoshi Tanaka (KEK, Tsukuba, Japan); David Button (ANSTO, Kirrawee, NSW, Australia); Rohan Dowd (ANSTO, Kirrawee, NSW, Australia); Volker RW Schaa (GSI, Darmstadt, Germany); Eugene Tan (ANSTO, Kirrawee, NSW, Australia) |
| Online ISBN |
978-3-95450-208-0 |
| Received |
15 May 2019 |
| Accepted |
18 May 2019 |
| Issue Date |
21 June 2019 |
| DOI |
doi:10.18429/JACoW-IPAC2019-MOPTS080 |
| Pages |
1031-1033 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
