IPAC2017 - Classification: 01 Circular and Linear Colliders / A10 Damping Rings

Paper	Title	Page
TUPAB009	Design Study on CEPC Positron Damping Ring and Bunch Compressor	1318
	D. Wang, Y.L. Chi, J. Gao, X.P. Li, C. Meng, J.R. Zhang IHEP, Beijing, People's Republic of China G. Pei Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China
	The primary purpose of CEPC damping ring is to reduce the transverse phase spaces of positron beam to suitably small value at the beginning of Linac and also adjust the time structure of positron beam for reinjection into the Linac. Longitudinal bunch length control was provided to minimize wake field effects in the Linac by a bunch compressor system after the damping ring. Both designs for damping ring and bunch compressor were discussed in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB009
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB018	Initial Data From an Electron Cloud Detector in a Quadrupole Magnet at CesrTA	1352
	J.P. Sikora, S.T. Barrett, M.G. Billing, J.A. Crittenden, K.A. Jones, Y. Li, T.I. O'Connell Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: This work is supported by the US National Science Foundation PHY-0734867, PHY-1002467 and the US Department of Energy DE-FC02-08ER41538, DE-SC0006505 In September 2016, we installed a detector in a quadrupole magnet that measures the electron cloud density using two independent techniques. Stripline electrodes collect cloud electrons which pass through holes in the beam-pipe wall. The array of small holes shields the striplines from the beam-induced electromagnetic pulse. The beam-pipe chamber has also been designed so that microwave measurements of the electron cloud density can be performed. The resonant microwaves are confined to be within the 56 cm length of the quadrupole. The detector is placed in a newly installed quadrupole that is adjacent to an existing lattice quadrupole of the same polarity. Since they are powered independently, their relative strengths can be varied with stored beam – allowing electron cloud measurements to be made as a function of gradient. This paper presents the first data obtained with this detector with trains of positron bunches at 5.3 GeV. The detector is installed in the Cornell Electron Storage Ring and is part of the test accelerator program for the study of electron cloud build-up using electron and positron beams from 2 to 5 GeV.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB018
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design Study on CEPC Positron Damping Ring and Bunch Compressor

1318

D. Wang, Y.L. Chi, J. Gao, X.P. Li, C. Meng, J.R. Zhang
IHEP, Beijing, People's Republic of China
G. Pei
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People's Republic of China

The primary purpose of CEPC damping ring is to reduce the transverse phase spaces of positron beam to suitably small value at the beginning of Linac and also adjust the time structure of positron beam for reinjection into the Linac. Longitudinal bunch length control was provided to minimize wake field effects in the Linac by a bunch compressor system after the damping ring. Both designs for damping ring and bunch compressor were discussed in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB009

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAB018

Initial Data From an Electron Cloud Detector in a Quadrupole Magnet at CesrTA

1352

J.P. Sikora, S.T. Barrett, M.G. Billing, J.A. Crittenden, K.A. Jones, Y. Li, T.I. O'Connell
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: This work is supported by the US National Science Foundation PHY-0734867, PHY-1002467 and the US Department of Energy DE-FC02-08ER41538, DE-SC0006505
In September 2016, we installed a detector in a quadrupole magnet that measures the electron cloud density using two independent techniques. Stripline electrodes collect cloud electrons which pass through holes in the beam-pipe wall. The array of small holes shields the striplines from the beam-induced electromagnetic pulse. The beam-pipe chamber has also been designed so that microwave measurements of the electron cloud density can be performed. The resonant microwaves are confined to be within the 56 cm length of the quadrupole. The detector is placed in a newly installed quadrupole that is adjacent to an existing lattice quadrupole of the same polarity. Since they are powered independently, their relative strengths can be varied with stored beam – allowing electron cloud measurements to be made as a function of gradient. This paper presents the first data obtained with this detector with trains of positron bunches at 5.3 GeV. The detector is installed in the Cornell Electron Storage Ring and is part of the test accelerator program for the study of electron cloud build-up using electron and positron beams from 2 to 5 GeV.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB018

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)