| Title |
Design and Characterisation of the Focusing Solenoidal System for the CLARA High Repetition Rate Electron Source |
| Authors |
- D.J. Scott, A.R. Bainbridge, K.B. Marinov, B.L. Militsyn, B.J.A. Shepherd
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- R.J. Cash, T.J. Jones
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- C.S. Edmonds
The University of Liverpool, Liverpool, United Kingdom
|
| Abstract |
One of the critical components of electron injectors based on RF photoelectron sources is the focusing system. The system typically consists of a Main Focusing Solenoid and a Bucking Coil. Combination of these two solenoids should provide proper focusing of the beam at the exit of the RF cavity and zero longitudinal magnetic field in the photocathode plane to minimise the beam emittance. Imperfection of the solenoid design, manufacturing and alignment frequently leads to asymmetry of the focusing field which has to be compensated with additional coils. In order to eliminate mechanical and magnetic misalignment the CLARA photoinjector solenoids are mounted on one integrated bench and before installation into the beamline have been aligned in the magnet laboratory with simultaneous measurement of the magnetic field. In order to define multipole field components, dedicated measurements of the transverse magnetic field have been done. The amplitudes of the multipoles have been obtained from analysis of the transverse field map. We present here the results of field characterisation.
|
| Paper |
download THPIK107.PDF [1.044 MB / 3 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2017, Copenhagen, Denmark |
| Series |
International Particle Accelerator Conference (8th) |
| Proceedings |
Link to full IPAC2017 Proccedings |
| Session |
Posters Thursday 2 |
| Date |
18-May-17 16:00–18:00 |
| Main Classification |
07 Accelerator Technology |
| Sub Classification |
T09 Room-temperature Magnets |
| Keywords |
solenoid, multipole, simulation, alignment, cathode |
| Publisher |
JACoW, Geneva, Switzerland |
| Editors |
Volker RW Schaa (GSI, Darmstadt, Germany); Gianluigi Arduini (CERN, Geneva, Switzerland); Juliana Pranke (ESS, Lund, Sweden); Mike Seidel (PSI, Villigen, Switzerland); Mats Lindroos (ESS, Lund, Sweden) |
| ISBN |
978-3-95450-182-3 |
| Published |
May 2017 |
| Copyright |
|
