| Paper | Title | Page |
|---|---|---|
| TUPB13 | Design Considerations of a Spectrometer Dipole Magnet for the Photo Injector Test facility at DESY in Zeuthen (PITZ) | 87 |
|
||
| The goal of the Photoinjector Test Facility at DESY in Zeuthen (PITZ) is to test and optimise electron guns for FELs like FLASH and XFEL at DESY in Hamburg and study emittance conservation by using a matched booster cavity. The physical specifications of a second spectrometer for measurements after the booster cavity at the beam momentum range from 4 to 40 MeV/c will be described. It will be used for measurements of the momentum distribution and the longitudinal phase space using two methods. The first method combines the dipole magnet with a RF transverse deflecting cavity, the second combines it with a Cherenkov radiator whose light is measured by a streak camera. Especially the first method is aiming for a good resolution in order to determine slice momentum spread. The design has to meet the demands of all these techniques for a measurement with high resolution and a bunch train containing 7200 pulses of 1nC charge and a repetition rate of 10Hz. Since there is not enough space for a separate beam dump after the dispersive section the beam has to be transported to the dump of the main beamline. |