| Title |
Proposed Linac Upgrade with a SLED Cavity at the Australian Synchrotron, SLSA |
| Authors |
- K. Zingre, B. Mountford
ASCo, Clayton, Victoria, Australia
- M.P. Atkinson, R.T. Dowd, G. LeBlancpresenter
SLSA, Clayton, Australia
- C.G. Hollwich
SPINNER GmbH, Westerham, Germany
|
| Abstract |
The Australian Synchrotron Light Source has been operating successfully since 2007 and in top-up mode since 2012 while gradually being upgraded to reach an excellent beam availability exceeding 99 %. Considering the ageing of the equipment, effort is required in order to maintain the reliability at this level. The proposed upgrade of the linac with a SLED cavity has been chosen to mitigate the risks of single point of failure and lack of spare parts. The linac is normally fed from two independent 35 MW pulsed klystrons to reach 100 MeV beam energy and can be operated in single (SBM) or multi-bunch mode (MBM). The SLED cavity upgrade will allow remote selection of single klystron operation in SMB and possibly limited MBM without degradation of beam energy and reduce down time in case of a klystron failure. The proposal for the SLED cavity upgrade is shown and the linac designs are detailed.
|
| Paper |
download WEPMA001.PDF [1.096 MB / 3 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2015, Richmond, VA, USA |
| Series |
International Particle Accelerator Conference (6th) |
| Proceedings |
Link to full IPAC2015 Proccedings |
| Session |
Wednesday Posters (Madison) |
| Date |
06-May-15 16:00–18:00 |
| Main Classification |
7: Accelerator Technology |
| Sub Classification |
T08 - RF Power Sources |
| Keywords |
klystron, cavity, linac, operation, injection |
| Publisher |
JACoW, Geneva, Switzerland |
| Editors |
Stuart Henderson (ANL, Argonne, IL, USA); Evelyn Akers (Jlab, Newport News, VA, USA); Todd Satogata (JLab, Newport News, VA, USA); Volker R.W. Schaa (GSI, Darmstadt, Germany) |
| ISBN |
978-3-95450-168-7 |
| Published |
June 2015 |
| Copyright |
|